bing tracking image
  1. Trailer Hitch
  2. B and W
  3. 2 Inch Hitch
  4. Class III
  5. 4500 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2011 Jeep Compass
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
B and W

B&W Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: BW32PR
In Stock
$204.38
Trailer Hitch
Not Confirmed to Fit

2011 Jeep Compass

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
B&W is known for building hitches people trust. Made in the USA and made to last. This one bolts right on, with the receiver just below the bumper for easy access. Powder-coated steel holds up against rust, grime, and plenty of road trips. Great Prices for the best trailer hitch from B and W. B&W Trailer Hitch Receiver - Custom Fit - Class III - 2" part number BW32PR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (32)
  • Q & A (0)
  • Photos

B and W Trailer Hitch - BW32PR

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Holds up to 675 lbs (TW): Handles heavy bike racks or fully loaded cargo carriers
  • Tows up to 4,500 lbs (GTW): Great for small campers, boats, and utility trailers
  • Standard 2" Receiver: Works with cargo carriers, bike racks, and Class III towing gear
  • Bolt-On Installation: Mounts using included hardware—no drilling or welding needed
  • Powder-Coated Steel: High-gloss black finish protects against rust and grime
Made in USA

Features to know about

Carry More Without Worry: Class III Strength and 2" Receiver

This hitch is built to handle real use. With a 4,500-lb maximum gross trailer weight and 675-lb tongue weight, it’s ready for hauling small trailers, boats, or fully loaded cargo carriers. The 2" x 2" receiver fits most bike racks, cargo baskets, and towing accessories, so you can hook up the gear you already have without needing adapters. It’s a solid upgrade if you want to tow or carry more weight with confidence.

Make Every Trip Easier: Clean Fit and Simple Bolt-On Install

The bolt-on design lines up with existing factory holes, so you don’t have to drill or weld anything. The three-piece setup and included hardware make installation straightforward with basic tools. Once it’s on, the concealed cross tube keeps a clean look under the rear bumper while leaving the receiver easy to reach. It’s the kind of project most folks can handle in an afternoon without a lift.

Built to Last Through the Miles: Powder-Coated Steel Construction

This hitch uses a sturdy square-tube design that holds up through years of towing and road grime. The high-gloss black powder-coat finish keeps rust in check and still looks good after plenty of use. It’s a dependable piece of gear that feels as strong as it looks, ready for whatever hauling or adventure plans come next.

Specs

Receiver Opening

  • Size: 2" x 2"

Rating

  • Class: Class III

Weight and Capacity

  • Maximum gross trailer weight: 4,500 lbs
  • Maximum tongue weight: 675 lbs
  • Not rated for weight distribution systems

Warranty

  • Type: Limited lifetime warranty

RH660118BW B and W Trailer Hitch Receiver - Custom Fit - Class III - 2"



This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.9

32 reviews
5 Stars
(28)
4 Stars
(4)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
2022 Subaru Crosstrek
This is the one to get. It's easier to install then any other hitch I've done thanks to it's three piece design. Everything lined up perfectly and it's nice and close to the bottom of the bumper so it looks stock with zero crossbar showing.
Mike L. profile picture
Etrailer Expert

Mike L.

9/10/2026

The hitch looks great, nice job on the install!

by:
2024 Subaru Crosstrek
The install was completed in under an hour (with the help of my daughter.) A second person is helpful with lifting the hitch frame and threading the carriage bolts.

As mentioned in other reviews, a step drill bit (I used 1/4-1-3/8) was helpful in modifying the holes in the chassis channels. The holes need to be big enough to thread both the carriage bolt and locking strap. In step 1 of the installation instructions, it would be helpful if the "forward" holes were clearly indicated next to the arrows in the picture.

We're happy with the results!! Thank you, etrailer!
Mike L. profile picture
Etrailer Expert

Mike L.

6/17/2026

Awesome, Jeff! Y'all did a great job!!!

by:
2025 Subaru Crosstrek
Pretty easy install, did it myself on garage floor with a floor jack for the receiver. Like the way it's tucked up behind the bumper cover
by:
2025 Subaru Crosstrek
Fits like a glove, a little confusing at first but once laid out No problems. Do wish you add the socket because of the long bolts. ( would have payed a little more to have had it ) Thanks to everyone from the YouTube, taking order to shipping.
Lazer S. profile picture
Etrailer Expert

Lazer S.

3/3/2026

Glad it wasn't too bad, Michele! And I hear you about the socket. I'll see what I can do about that moving forward. What are you going to be using the hitch for?

by:
Super easy install, everything fit as it should, no rubbing/vibrating with the muffler. Used a simple file to bore out the holes in the frame a small amount and everything went together as described
Nick S. profile picture
Etrailer Expert

Nick S.

11/3/2025

That is great to hear, I am glad the install went as it should with no issues! What are you planning to use the hitch for?

by:
Subaru XV Crosstrek
I have a 2024 Crosstrek Wilderness. Like the other review the muffler initially vibrated against the back of the hitch once the muffler heated up. (See Picture)

To fix it I had to loosen the frame mounting bolts and pull the whole hitch mount forward. So if you have a wilderness once you torque up the cross bar bolts loosen the frame mounting bolts again and pull the whole thing forward.
by:
Came quick I followed the instructions and video for 2025 Subaru CrosstrekI didn’t have a lift or jack stands which would have made it more easy but managed to get it installed. I like this hitch because it only showed the 2” receiver which made it a cleaner look.Seems heavy duty.Will mainly use it to haul my Catrike on a converted hitch hauler.
by:
Smooth, easy install. I used a hand file to widen the opening and it maybe took me 15-20 minutes. I did the install by myself in my garage with the vehicle raised up on 2by4's. Plenty of room to work. Nice finished look with only the receiver visable below the bumper. Now we'll see how the paint holds up to a Minnesota winter.
Lazer S. profile picture
Etrailer Expert

Lazer S.

6/8/2026

Glad to hear the install went smoothly! Salty roads can be pretty hard on hitches, but just wash it off when you wash your car and if/when you see rust spots, sand then off and use a good rust preventing spray paint to touch it up. It will help keep it in good condition for years to come! ^___^ What are you going to be using the hitch for not that it's installed?

by:
Easy installation. The video from etrailer was very helpful.
by:
2026 Subaru Crosstrek
Installation was not to difficult. The hitch is solid and will do what we need it to do. Very happy that it was made in the USA.
by:
2025 Subaru Crosstrek
The install was very simple, I was able to do the entire thing by myself.
The hitch looks great and is very solid.
by:
Install advice DO NOT use a Die Grinder Burr Bit as the install video suggests. Instead use a #5 (1/4"-1 1/8") Step Drill Bit. You will also need a 6" extension to access the frame on the driver side. The passenger side is the easiest to access. With a Die Grinder Burr Bit it took me 40 minutes to widen the hole big enough to get the bolts to fit on the passenger side. Also note the the carriage bolt is 1-2mm wider than the metal tab. On the driver side the exhaust is in the way (I tried removing it, which is a huge pain. I would not recommend) No matter what I tried I could not get access with the Die Grinder Burr Bit with the exhaust and manifold in the way. So, I went to Harbor Freight and got the step drill bit. With the 6" extension I was able to make the hole big enough in about 10 seconds vs 40 minutes with the burr bit die grinder. Installed it fits great. I like how there aren't any metal bars hanging down like on some of the other options on this site. Its got a low profile look like the tow hitches that cost 2+ times as much. Definitely recommend. Bummed that I spent $35 at the local hardware store on die grinder burr bit then $40 on the step bit though...
by:
2025 Subaru Crosstrek
Easiest installation ever.
by:
2026 Subaru Crosstrek
heavy for one person (me) to lay under the car to put the side pieces on, but after the side pieces were on, everything was easy.
by:
2025 Subaru Crosstrek
The BW trailer hitch was a great product came nicely wrapped in its box and insulation was very easy.
by:
2025 Subaru Crosstrek
I’m truly glad I chose this trailer hitch receiver. There were several factors I considered before making my decision:
• Towing capacity: I wanted a hitch rated above my vehicle’s limit so it’s ready for any future needs.
• Warranty: Lifetime limited warranty is the standard I expect.
• Design: The crossbar shouldn’t be visible or hang too low.
• Made in the USA
• Strong customer reviews
• Reasonable price
• Ease of installation
• Reputable manufacturer

This B&W Hitch Receiver met all of those requirements perfectly.

The installation video on etrailer.com made the process look simple, but it required using a tool to widen one of the frame holes. Since I didn’t have that tool (and preferred not to modify the frame), I chose the alternative method—removing the rear bumper and accessing the holes from the back.

The installation wasn’t too difficult on my 2025 Subaru Crosstrek Wilderness, though it took about four hours to complete with help from my son. Before starting, I watched a few bumper removal videos for the 2024 and 2025 Crosstrek Wilderness models, which helped a lot.

As some other reviewers mentioned, the rear bumper plastic touched the crossbar slightly. However, it wasn’t a big issue. I simply pressed the bumper cover back into place and secured the retaining clip—problem solved.

Overall, I’m completely satisfied with this hitch receiver. The quality is excellent, and I really enjoyed completing the installation myself.
by:
2024 Subaru Crosstrek
Great Quality. Designed so one person can easily install it. Good price. Timely delivery.
by:
2025 Subaru Crosstrek
Easy install, should work just dandy!
by:
Great service
Great product
Fair price
by:
Subaru XV Crosstrek
Seems like a solid hitch receiver, and the install went pretty smooth with the help of the video, but it sits really close to the muffler on the 2024 Crosstrek Wildeness. I'm not sure if other trims have more space, but the muffler rattles against the receiver. I had to do some jimmy-rigging to create some space and stop the rattle. Overall, I do recommend this hitch receiver, but prepare yourself in case it sits too close and rattles against the muffler.
by:
Subaru XV Crosstrek
This hitch was very easy to install, with minimal tools. I like the low profile look of it. It works for my needs perfectly. I do wish it was matter black to blend better with the fla black plastic trim on my Crosstrek, but that is a less than minor issue.
by:
Easy to install, great instructions. Don’t skimp on your carbide burr bit if buying a new one for this project! Make sure to get a quality bit, you’ll be happy you did.
by:
Was able to do install myself, no helping hands needed. My drill didn’t quite fit in the space under the car needed to grind open the forward holes, was able to do this with a Dremel and a metal cutting disk. Also was able to install with the car parked flat, no ramps.
by:
2025 Subaru XV Crosstrek
Great hitch and I saved $$$ over the dealer's price. IT was easy to install, however on a Wilderness Crosstrek, two odd protrusions on the underside of the bumper interfered with the corners of the side plates. This was remedied by simply trimming the plastic of the bumper with heavy duty scissors. I only had to remove about 1/2 square inch of material for a great fit, and it doesn't show or weaken the bumper. I'm mostly using the hitch for my Thule bike rack, but I also have a cargo rack and 8' utility trailer that will be used when needed.
by:
25
32
true
Show More Reviews

See what our Experts say about this B and W Trailer Hitch

  • Rust Resistant Trailer Hitch Options for a 2026 Subaru Crosstrek
    Hi Robert, I'm sorry to hear you had so many issues with your old hitch, especially after having to maintain it every year and eventually replace it. That's honestly not something we hear all of the time and makes me wonder if you got a bad batch of powder coating. Sadly, we don't currently carry a stainless steel hitch for your 2026 Subaru Crosstrek. If you're open to a steel hitch with a strong rust resistant finish, I'd recommend taking a look at B&W part # BW32PR. It has a UV resistant...
    view full answer...
  • Trailer Hitch Recommendation for 2022 Subaru Crosstrek
    Hey Chris, we do have more hitches now for your 2022 Subaru Crosstrek than what we had when we made the video you referenced but even with that in mind I would recommend the B and W part # BW32PR because it's mostly hidden and because it has the best towing capacities. Doesn't' hurt that it was also made in the USA. Are you planning on doing any towing?
    view full answer...
  • How Much Does The B&W Trailer Hitch Receiver BW32PR For A 2025 Subaru Crosstrek Weigh?
    Hi Rich! The B&W Trailer Hitch Receiver - Custom Fit - Class III - 2" # BW32PR for your 2025 Subaru Crosstrek (excluding the Hybrid) weighs right at 35 pounds. Which is pretty typical for a hitch of this design. Are you worried about adding weight to the back of your Crosstrek? What will you be using it for?
    view full answer...
  • Will B&W Trailer Hitch Fit 2025 Subaru Crosstrek Wilderness
    Hi V; the B&W Trailer Hitch # BW32PR will fit your 2025 Subaru Crosstrek Wilderness as long as it is not a hybrid. It is compatible with all trim levels of the Crosstrek. What do you plan on using the hitch for?
    view full answer...
  • What is Torque Specs for Install of B and W Hitch BW32PR
    Hey Gevin, I looked up the install instructions for the B and W hitch RH660118BW # BW32PR and found that the torque spec for all of the bolts is 100 ft lbs.
    view full answer...
  • B&W Trailer Hitch Receiver for 2026 Subaru Crosstrek Premium
    Hey KO365! The B&W Trailer Hitch Receiver # BW32PR will fit your 2026 Subaru Crosstrek Premium. We have only seen the vibration/contact with the muffler on the Wilderness models so that won't be an issue. Also yes, you will be able to use your Thule T2 Classic with this hitch. This particular hitch hasn't been out for too long but B&W does a great job with their powder coat so I expect it to outperform similar hitches. It will be well packaged, but sometimes even the best packaging can...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Katherine B
Edited by:
Katherine B
Employee Michael B
Updated by:
Michael B
Employee Kim H
Written by:
Kim H
Employee Daniel M
Test Fit:
Daniel M

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.