bing tracking image

Review of etrailer Trailer Fenders - Single Axle Fender - HP37FR

Customers compare HP37FR to these similar products

Products Featured in this Video

etrailer Trailer Fenders - Single Axle Fender - HP37FR Review

Jeff: Hello, everybody. This is Jeff at Today, we're going to take a look at this etrailer single axle steel trailer fender with the ribs for 13-inch to 14-inch wheels. It is for a quantity of one fender. Now, this rounded fender will cover one tire on your single axle trailer. This will act as a splash guard.

Keeps road debris from hitting other vehicles, and it will also help protect your trailer's cargo. Now, I wanted to show you the outer edge on this if you notice. Has this nice one-inch curve radius lip to it. Gives it a nice finished appearance, and on the inner edge, right back here, it is a 90 degree lip on this inner edge, and that's so it's designed to mount flush to your enclosed trailer.This is a sturdy ribbed, 16-gauge cold rolled steel construction. Nice raw finish.

Can be primed and then paint it to provide even more resistance to corrosion and also to match your trailer's paint finish. If you notice, it has the two ribs on here. These are stiffener ribs. They're designed to help eliminate flexing of the fender. Now, this is a nice weld-on or bolt-on installation.

It is not pre-drilled, and the mounting brackets for bolt-on installation are sold separately.This part is made in the USA. Again, the specs on this. It's for a quantity of one fender. It is for a single axle trailer with 13-inch to 14-inch diameter wheels. The weight on this fender is only about six pounds.

And the last thing I do is just to give you some measurements on this. We're going to measure the length from here to here. If we put our ruler on there, it's going to be right at 28 inches long. Overall height from the bottom to the very top is right at 10 inches tall, and the width on it is right at seven and three quarter inches wide. That should do it for the review on this etrailer single axle steel trailer fender with the ribs for 13-inch to 14-inch wheels for a quantity of one.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.