Replacement Fender Recommendation for a 2017 Jayco Hummingbird 17RK

Question

Question:

Hi, I need a replacement fender for a 2017 Jayco Hummingbird 17RK. Its for the left side, as you look at it from the rear. I dont need the light on it. 14 wheel. Can send photo if you need it. Thanks, Paul

asked by: Paul B

0

Expert Reply:

Hey Paul, thanks for reaching out!

According to my research it looks like you either need the Smooth # HP69VR or Ridged # HP37FR steel fender, and you'll need to paint it black to match your current 2017 Jayco Hummingbird 17RK fender.

expert reply by: Jon G

0

Larry

7/30/2025

The 7 3/4" width of the ones you listed does not cover the tire. The fender on the right is 10" wide, 29" long, and 11" high.

Reply

Jon G.

7/31/2025

@Larry Are you saying the fender on your trailer is 10" wide? From the specs you gave me, the closest fender we have to matching that is the part # HP49FR which measures 32" long x 10-3/4" wide x 15-1/4" tall.

Reply

Larry

7/31/2025

@JonG, Yes, as I stated, the fender on the 2017 Jayco Hummingbird 17RK is 29" long, 10" wide, and 11" tall. The one you suggested is too long and too high for that model.

Reply

Answer 1

Hey Barry, thanks for reaching out. So the measurements we list for the #TRU44FR spindle are correct, but it looks like the picture they use above the chart is a generic image of a spindle, and it not an exact picture of the #TRU44FR spindle. I…

view full answer...

Answer 2

Hi Donald! The MouseBlocker PROx Plug In Electronic Rodent Deterrent - 110V AC #MB34FR is rated to protect up to 400 square feet. However, it is mostly intended for direct protection and not necessarily a large area. Think vehicles, trailers, and…

view full answer...

Answer 3

Hey Jim, I reached out to the nice folks at Shocker Hitch and they were good enough to send me the dimensions of the Shocker Hitch Quick Air 5th Wheel Pin Box - Lippert 1621, Rhino and 0719 #SHK62MR. The distance from the middle of the pin to the…

view full answer...

Answer 4

If by radius you mean the length of a line segment from the center of a sphere to its perimeter then it is 11-3/4 inches given that the overall length of the fender #CE17701G is 23-1/2 inches. Because the fender is not a true half circle, this does…

view full answer...

Answer 5

We have a couple of options that may work for you that are designed to work with trailers that have 12 inch wheels and are very close to the 25" x 8" fenders you currently have. One is rounded and one is a Jeep-style (more square) and if…

view full answer...

Answer 6

Based on your description and measurements, this pair of fenders will make a great replacement. Typically you want to match the dimensions of your old fenders so at 60" long these will work well. They are also 9" wide and 12" tall.…

view full answer...

Answer 7

A true 1 inch spindle is a BT8 spindle, like #TRU94FR. The next closest one would be the BTR spindle which is commonly referred to as a 1-1/16 inch spindle, like #TRU44FR and is more common than the BT8. Both of these are typically used with 2,000 lb…

view full answer...

Replacement Fender Recommendation for a 2017 Jayco Hummingbird 17RK

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching