To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.
Features:
Specs:
The Pro Series Pilot comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Pilot. The controller then sends power out to your trailer brakes to activate them with an intensity set by you, at a rate determined by you. The amount of braking power (output) can be adjusted to suit your preference, the road conditions, the type of trailer, and the weight of your load. To determine which levels are best for your application, test your towing setup and choose what feels right.
Braking output is the maximum amount of power that will be applied to your trailer's brakes. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to set the braking output as high as you can without locking up the brakes. Once you've set up the brake controller the first time, you shouldn't need to adjust the settings until the trailer load changes, you switch trailers, or road conditions change. Use the thumbwheel on the side to change the braking output level. The output setting will appear as a number on the digital display, with a higher number indicating higher braking power.
The Pro Series Pilot keeps the manual override within easy reach on the front of the module, great for stopping sway or controlling your trailer's momentum in emergencies. Push the slide-bar to activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. Your mounting options are limitless, so long as you can still easily access the controller and manual override. The Pilot is especially flexible; its microprocessor allows the controller to even be mounted upside down, and it will still give you a readable display. The Pilot can go wherever you need it. Plus, the included wiring adapter eases installation overall. The custom connector end plugs into the port on your vehicle and the other end plugs into the controller.
You can use etrailer's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Tekonsha plug-in wiring adapter for electric brake controllers. This product fits certain years and models of Ram trucks. To make sure or to check if it's a fit for your vehicle, you can use the vehicle fit guide located at etrailer.com. This wiring adapter simply eases the installation of your electric brake controller. The custom connector end is going to plug in to the build in port beneath the dash of your vehicle. The other end plugs into the back of your electric brake controller. This is compatible with time delayed brake controllers, like the the Draw-Tite Activator one, Activator two, Activator three and Tekonsha PowerTrac.
It's also compatible with proportional brake controllers, the Tekonsha Prodigy, the Tekonsha P2, P3, Primus IQ and Voyager. The wiring's going to feature a nice protective mesh that goes over the wires to keep them bundled together, it's going to keep them from hanging out around your feet. The black and blue wires on the unit are going to be gauge 12, red and white are gauge 16. I need to mention that to illuminate your vehicle and trailer brake lights when you activate the manual override on your brake controller, you'll want to use in conjunction with the Tekonsha brake controller converter with seven way adapter, part number 30235-P. That is required for use in the state of California. It is sold separately and available at etrailer.com. I do want to mention real quick that these plugs are custom fit.
This one's going to fit the brake controllers I mentioned. It's going to push in the back of the controller and then it's got the locking tab. Then on this side, this is custom fit for your vehicle. It's going to push together, it's going to match up perfectly with the port on the vehicle and it's going to snap lock together for a nice tight, secure fit. That's going to do it for today's look at the Tekonsha plug-in wiring adapter for electric brake controllers..
good value but the swivel mount being optional should be made more clear
Installed in my 2020 Gladiator and used the 3024P adapter(you must switch the black and blue wires!) it works perfect. Yes i cut a hole in my new truck but it is out of the way and you can easily access it.
Shipping was timely product was excellent.
Great product, it made installation of my brake controller much easier.
The ram wiring harness is a bit difficult to get to though. I dropped the panel covering the fuse box (it’s just two 7mm bolts.) and it made it alot easier to get to and unwrap.
Great product clipped straight into factory wiring harness. Ram 1500 Classic Tradesmen 2019
Install was simple with provided factory match jumper. Total 10 mins to install on 2015 Ram 1500. Still need to configure settings otherwise purchase and install simple along with great price.
I purchased a new 2017 Ram 1500 and was looking for a break controller. My son recommended the Tekonsha Prodigy 2 . I found it on etrailer.com at a better than expected price and ordered the controller and the wiring harness. I received the item in four days. It was a breeze to install. Truly plug -and-play ! Set up was a snap and I like not having to level the device every time , as with my previous controller !
I am very satisfied with my purchase and with etrailer.com !
Just wanted to throw it out there for reference for any future searches. This was for installation on a 2020 RAM 1500 (DT) which did not have a factory tow package or brake controller installed. I reviewed the e-trailer installation video on a previous Gen RAM and it said the plugs would be right above the gas pedal. At first, I couldn’t find the OEM harness plugs; There weren't any plugs just hanging out in that area.
When I got my package yesterday, I decided to take another looksee.
This time I easily found it. Looking from under, I could see the two plugs snuggly taped together with black material, not electrical, tape. Looking up from my under dash position they were slightly to the left and up. If you have huge hands and forearms, it may take some positioning, and skin cuts, to get to. Luckily I don’t, but took a little finesse to get the tape off. Once I got that off, there was plenty of room to work and plug my adapter harness into.
The brake controller came with a mounting bracket and sheet screws to mount somewhere. Under our dash, there’s a metal dash screw right about the gas pedal that works perfect to mount the bracket. I put on a zip tie as well to make sure it was extra secure. Zip tied the extra slack of the OEM harness and adapter harness under the dash.
Very easy install.
Plug and play. Gotta love it! My 2017 Ram 1500 didnt come with a factory brake controller and I didnt want to spend a lung buying it and having it put in. I found a Primus iq second hand on the cheap and needed the wire harness to make it work. Installation was a breeze and it looks and works great. I saved big $$ and am very happy. Lori B made it happen for me. She was very nice and gave me her direct line when I needed to call back and had the wiring sent out asap. Very satisfied. Thanks Lori B!!
Made installation easy.
2015 ram 3500 truck.took all of like 10 min. To install and that's just taking my time.the 4 pin plug for the truck is just above gas petal.plug in the adapter to the truck.route the wires how you wish to run them.mount the controller where you wish to mount it which i utilized the panel screw for mine rather than put a hole in my new truck.plug in to controler zip tie the wires and your done.I read forums where people make a big issue out of this.truth is it's nothing to it.plug and go.hope my pics are helpful one showing the 4 pin plug,the mount location, and wires zip tied up.I like the mount type for the primus iq. Wouldn't be no problem swap g it to a different truck.I have not used it towing yet to review that part.maybe I can later
Product was exactly what I needed. I sold my old truck with the wire still in it (different make) all I needed a new one for this truck. 5 min of searching and I knew I found the one. 2 day shipping and it arrived on my doorstep. After 10 min of pulling at wires and tape behind my dash I found the right ones. Plugged it in and wham it connected right away (only to tell me I had a broken wire on my trailer brakes, but that's another story).
Good product, fast shipping, A+
This morning's project, etrailer.com, delivered in three days, perfect fit, one recommendation, secure the hitch with the two factory bolts on each side, then fish the remaining four bolts into place
easy install took longer to get tools out than to put in definitely plug and play with wiring adapter
This is on a 2015 ram outdoors man install was about 10 min. very simple!!!!! truck pigtail is right above right foot covered in a foam tape next to what i think is the factory brake control harness. Thank You E-Trailer!!!!!!!
Accurate for my application
Part was an exact fit....Have yet to have any problems any time I order trailer parts from your company.
I am very pleased with this kit only to 5 minutes to install. Easy to follow instructions on install this product. Works great tow are camper every weekend. Would recommend it to everyone.
Easy install with matching wire harness for your vehicle. This controller with proportional braking is a lot of tech for the money and can be programmed easily in a few minutes for your trailer applications. I installed this on my 2019 Ram 1500 Laramie in 1/2 hour, most of that time was figuring out where I wanted to mount the unit. Works flawlessly, and can be be removed from the bracket in a minute and stored in the glove box (if you use the plug in wire harness to match your vehicle. This is a much better controller and several hundred dollars less than a dealer installed controller.
I love that someone has a head on their shoulders to make the adapter to awesomeness and trailer hauling glory
Great deal
I was starting to worry because Ram hasn't released the electronic trailer brake controller yet for the 2019 Ram 1500 so I decided to look elsewhere. Fortunately etrailer.com had exactly what I needed. This adapter combined with the Tekonsha P3 Prodigy works perfect, and truly is "plug and play"
Installation of the P3024-P brake control harness couldn’t have been easier. The harness itself was the perfect length for my application in a 2019 new body Ram. I was also appreciative of the protective shield that protects the individual wires in the harness. I had to route the harness over some metal brackets that had sharp edges so that shield works to protect the wires. Simple and easy snap and play installation.
Great product!!
easy to use brake box
Do you have a question about this Trailer Brake Controller?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.