Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
Item # RM-15267
Retail:$180.31
Our Price: $145.39
You Save: $34.92
Confirmed to Fit
2001 Toyota Sequoia
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1269)
- Q & A (0)
- Photos
2001 Toyota Sequoia - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
Diode kit allows you to use your Subaru Impreza's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.
Features:
- Lets you wire your Toyota Sequoia to accept your RV's tail, brake, and turn signal lights for flat towing
- Wires towed car as combined system so that brake and turn signals travel along same wire
- Prevents electrical feedback and the damage it can cause to your Toyota Sequoia's electrical components
- Diodes powder coated aluminum case is corrosion resistant and provides protection from the elements
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Flexo-Coil cord is resitant to water, oil, chemicals, and has silicone-injected plugs to prevent corrosion
- Center pin on 6-Way plug wired to 12V power, there are two industry standards
- Includes:
- 4 Hy-Power diodes
- 4-Wire harness
- 27" Long
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- 8' Coiled cord
- Vehicle mounting bracket
- Socket
- Made in the USA
- Limited Lifetime Warranty
Specs:
- Diode Max amperage: 85 amps
- Diode Max voltage: 24 volts
- Coiled cord max length: 8'
- Coiled cord retracted length: 15"
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes (RM-792) will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these Toyota Sequoias have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your Toyota Sequoia will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your Toyota Sequoia as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
15267 Road Master Towed Car 4 Diodes RV Plug to 6-Wire Socket Flexo Coil Wiring Kit
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit - RM-15267
Average Customer Rating: 4.8 out of 5 stars (1269 Customer Reviews)
Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.by: Dale04/13/2023
2014 Chevrolet Spark
Very complete kit. My only problem mounting it in a 2014 Chevy Spark is the limited space for the diodes. After much trial and fitting I found a suitable location. See photo.
by: Ken05/17/2024
This item was recommended by Jameson once he saw what I was planning to order for the tow bars and brake system. It was installed by a shop on the etrailer authorized installers list, along with everything else for the entire towing system. It does attach to both vehicles just fine, although at first I wasn't sure it was fully attached on the motorhome side. I was afraid it would just slide back out, but it hasn't.
by: Mike R.03/19/2024
Finished wiring and first effort to plug in red flex coil to the Jeep and the outside protection cover broke apart; very disappointing. Trying to contact Etrailer for replacement.
by: Russell 05/27/2024
Toyota Tacoma
2018 Toyota Tacoma TRD Sport 4x4 install, summer of 2023. This was simple to install. Easy to run along the underside of the truck and snake up into the taillights. Plenty of wire and worked fine when complete.
by: Gary04/12/2024
Haven't installed it yet, but the kit seems to include everything I need. My contact at etrailer did a great job of getting me exactly the right parts to complete my flat tow package, and the videos available on the web site to help with installation are a great feature. I don't think I would tackle this installation myself without all of the helpful information these folks provide.
Jenny N.
4/13/2024
Thank you for reaching out! I would love to see pictures and how your trip went once it is installed. Happy Trails Gary.
by: Fritz 04/26/2024
This seemed unnecessary but is really the only proper solution when working with LED taillights. It works perfectly.
by: Timmy04/11/2024
Jeep Wrangler
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
by: John05/17/2024
This kit worked out well. It contained everything needed to tap into my vehicles lights and continues to be trouble free after a year of use.
by: Bob05/23/2024
Worked fantastic.. after I received it I installed it and went from indiana out west. I have put around 9 thousand miles on it so far.
by: Dan 02/10/2024
I have to say : E trailer always delivers !
This is exactly what ya need if you are adding a second vehicle or swapping your old system to a new rig. I could have gotten by without the plug but for the price decided I should get a spare.
Delivery was prompt and product was exactly as described.
by: Aaron03/31/2024
GMC Sierra
The wiring kit does what it is supposed to do. I would like to see all of the terminal connections to be the marine grade heat shrink type with the solder inside. The type that join the wires with a heat-gun. I installed this in a 2024 GMC Sierra Denali 1500. I chose to mount the connector by drilling an hole through the plastic front license plate. This will be covered with a flip-up license plate frame. All-in-all, I would purchase this set again.
by: Tim 12/12/2023
2011 Jeep Wrangler
We added this kit and tow cable to keep our Jeep battery charged while towing, so the supplemental brake could stay powered. It has worked well for us for several long trips from GA to NH and MI. The Jeep side of the tow cable ended up with a crack in the metal plug, but we were able to get a replacement plug and rewire it pretty easily. We are going to complete the wiring for the tail lights before our next trip.
by: Michael 02/02/2023
2014 GMC Sierra
great complete wiring kit for my 2014 gmc sierra 1500
Michael
2/2/2024
flawless
by: roparv03/06/2023
Installed as per video...I had a local car/truck accessory shop install mind as way too many facial screws for me to content with. $400 to have it done right.
(A little worried that if I get too close to a vehicle or wall that some damage my occur as cable connector and braking wiring sticks out 3-4 inches from front of car.) My older system was cleaner design across the front of the car.
by: Greg 02/23/2024
2011 Jeep Wrangler
The video instructions made this harness very easy to install (other than routing the wire to the back of the Jeep). Everything functions as it should. I'm very happy I went with this harness versus magnetic lighting.
by: Gary12/06/2023
My Roadmaster Sterling tow bar has a channel for the wiring kit to run through. the coiled wire is not easy to work with on this bar if you want it to run through the channel. 10 months into using it the 6 wire end disintegrated and had to be replaced. luckily we were camped right beside a Camping World.
by: Christina 05/22/2024
Easy to install with great instructions provided.
by: Jordan 01/05/2024
2009 Ram 2500
A bit of a learning curve for first time dyi on this type of thing. Key is to make sure you figure out what type of brake light systems you have. There are 2 types and 2 different wiring diagrams. Read directions thoroughly. Works well. 2009 dodge 2500 install
by: Jaime04/17/2024
The best customer service. The really know all about rv accessories
by: Rob 12/13/2022
Works as advertised. Installation takes some time but instructions were very good. No complaints.
Rob
12/14/2023
Still working fine.
by: Terry11/14/2023
Just wanted everyone to know, that after one year of owning and using the Roadmaster towing baseplate, and the wiring harness for my 2022 Ford Maverick, I have accumulated over 10,000 miles of trouble free towing behind my Motorhome. The folks at etrailer did a great job making sure I had the right parts and at a good price. Delivery of the parts was exactly the day it was promised. I highly recommend them when need these kind of parts. I really appreciated the great and friendly service!! Safe travels
by: Timothy02/15/2024
Works good. Reasonably easy to install. The diodes are large and you have to get them 'just so' behind the tail lamp assemblies to get the lights to seat properly.
by: Skid Lid01/24/2024
Project went as expected. I did purchase additional split loom from Harbor Freight to protect the wires from the front to the rear of my truck. It easily ran inside the frame rails!
by: Richard 02/10/2024
Roadmaster
The roadmaster connection kit for our brake system on our toad has worked perfectly.
by: Lloyd 03/27/2024
I have had no problems with wiring kit. it works well on my Ranger'
25
1270
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Parts Needed to Flat Tow 2016 Cadillac EscaladeAlong with the Blue Ox Base Plate Kit # BX1716 and the Blue Ox Alpha 2 Tow Bar # BX7380 there are a couple more parts you need in order to safely flat tow your 2016 Cadillac Escalade. Since the Alpha comes with safety chains we can check that off the list but you will also need a wiring kit in order to activate your Escalade's brake lights and turn signals. For that the best option is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267, or you can simply add magnetic...
view full answer... - Is There A Baseplate That Doesn't Require Removal Of The Tow Hooks On A 2020 Jeep Cherokee TrailhawkAll of the baseplates that we currently offer will require removal of the tow hooks because they mount in the same space as the hooks. Since you already have a Blue Ox tow bar I recommend the Blue Ox Base Plate Kit # BX1143 so that you don't have to use any adapters. For the wiring I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This kit will have everything you need to display your running lights, brake, and turn signals from the motorhome to your Cherokee....
view full answer... - How To Use etrailer Tow Bar on a 2020 Jeep WranglerIn order to use the etrailer XHD Non-Binding Tow Bar part # e94ZR on a 2020 Jeep Wrangler you'll need to use the etrailer Invisible Base Plate Kit part # e98948. In addition to this you'll also need some other items which I have listed for you below. Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524 If the tow bar is not within 3" of level then you'll also need a high-low adapter like the Blue...
view full answer... - Blue Ox Parts Needed to Flat Tow 2014 Jeep Cherokee TrailHawkThe correct Blue Ox base plate kit for your 2014 Jeep Cherokee is the part # BX1136 that you referenced. There are a few other things needed aside from this and the Blue Ox tow bar you have currently as well. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector...
view full answer... - Does 2018 Jeep Grand Cherokee Need Base Plate to be Flat TowedYour 2018 Jeep Grand Cherokee does require a base plate in order for you to flat tow it; the reason for this is because it gives you the most secure and stable connection to your motorhome and that the tow hooks are for recovery purposes and not intended to tow the vehicle. Most importantly this increases the safety of flat towing but it is also the best thing to do for your Jeep in terms of its chassis and suspension. I recommend checking out the "Recreational Towing" section of your owner's...
view full answer... - Is The Blue Ox Ascent Tow Bar Compatible With Curt Baseplates Yes, Blue Ox tow bars, like your Ascent # BX4375, are compatible with Curt baseplates like the Curt Custom Base Plate Kit # C64ER. If you haven't picked out the rest of your flat towing components then I have the following recommendations for you: Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This wiring kit will display the traffic signals from your motorhome through the tail lights on your Ranger to remain street legal. Braking System: Roadmaster...
view full answer... - Recommended Flat Towing System for 2018 Chevy Silverado 1500 and Blue Ox Tow BarIt looks like you simply have an older style Blue Ox tow bar from your photo. You will simply need to make sure it is rated for the weight of your truck and that capacity should be listed on one of the stickers. You already have the safety cables and a high-low adapter, so there are a few components you need for your 2018 Chevy Silverado 1500. I recommend using the Blue Ox Base Plate Kit - Removable Arms # BO94FR which will work well with your tow bar. For your wiring, I recommend the...
view full answer...
- Parts Needed To Flat-Tow a 2016 Chevy ColoradoIn order to flat tow a 2016 Chevrolet Colorado you'll need base plates, tow bar, safety cables, wiring harness, and a supplemental braking system. In regards to the motorhome, you simply need a standard trailer hitch and wiring harness. I have attached for you below the parts I recommend. Roadmaster Direct-Connect Base Plate Kit part # RM-523182-5 Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar part # RM-676 Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Roadmaster...
view full answer... - Recommended Flat Towing Equipment for 2016 Jeep Wrangler Unlimited SportTo flat tow your 2016 Jeep Wrangler Unlimited behind a motorhome, you'll need baseplates, safety cables, a tow bar, a wiring solution, a supplemental braking system and possibly a high/low adapter. For base plates, I'd recommend # BX1126 for the standard factory bumper (if you have a different bumper, let me know.) For a tow bar, the Blue Ox # BX7380 Alpha 2 would be a good choice, with its 6K capacity. Safety cables are included. For wiring, I prefer the Roadmaster # RM-15267 over anything...
view full answer... - Recommended Parts Needed to Flat Tow a 2016 Ford Explorer 3.5LI checked the online owner's manual for your 2016 Ford Explorer 3.5L and it looks like you're good to go with flat towing your vehicle. I do recommend checking out your copy of the owner's manual to verify this and any specific instructions for flat towing. I recommend using the following parts as a flat tow setup: Blue Ox Base Plate Kit - # BX2668 Blue Ox Alpha ow Bar - # BX7380 (with safety cables) Roadmaster Wiring Kit - # RM-15267 Brake Kit - # SM99251 (motorhome hydraulic brakes)...
view full answer... - Can 2009 Ford F-150 with Manual-Shift Transfer Case be Flat TowedIf your 2009 Ford F-150 4x4 has a manual-shift transfer case (it will have 2H, 4H, N, and 4L on it) then you can flat tow it with all 4 wheels on the ground. Since it sounds like this is what you have I recommend using the following parts to flat tow your F-150: Base Plate Kit - Demco Classic Base Plate Kit # DM9518296 Tow Bar/Safety Cables - Demco Excali-Bar III # DM9511013 Tow Bar Wiring - Flexo-Coil Wiring Kit # RM-15267 Braking System - SMI Stay-IN-Play DUO # SM99251 (motorhome with...
view full answer... - Supplemental Braking Sytem and Wiring for Lights Towing 2019 Jeep JL Behind MotorhomeFor a supplemental braking system I recommend the Demco # SM99243 SBS Air Force One Supplemental Braking System for Motor Homes with Air Brakes. I have included a link to this product page and a link to a video tutorial that explains the installation. For a lighting wiring harness I recommend the Roadmaster # RM-15267 Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit With the install of this wiring harness you will want a # RM-15625 Battery charge line kit. This will charge your towed vehicle's...
view full answer... - Best Parts to Flat Tow 2019 Jeep Wrangler SportWe can definitely get your 2019 Jeep Wrangler Sport set up to flat tow. To do this you'll need a number of different parts, and I'll make a list for you with the best options, and go over why in more detail. Here are the best parts to flat tow your 2019 Jeep Wrangler: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 - Tow Bar: Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422 - Safety Chains: Roadmaster 64" Single Hook, Straight Safety Cables # RM-645 -...
view full answer...
- Recommended Parts to Flat Tow a 2013 Jeep Wrangler with an EZ5 Base Plate KitIf the round parts of the Roadmaster EZ5 Base Plate Kit # RM-521448-5 on your 2013 Jeep Wrangler look like what I have highlighted in the attached photo then those are the removable arms. You can take them off when you aren't towing your Wrangler to give it a clean look. The Roadmaster Falcon 2 Tow Bar # RM-520 will connect directly to the EZ5 base plates and you can use the Coiled Safety Cables # RM-643 which have a 6,000 lb weight capacity just like the Falcon 2. You also need vehicle...
view full answer...
- 2009 Ford Focus Parts to Flat Tow Manual TransmissionI'd be more than happy to help you with the best parts to flat tow your 2009 Ford Focus! I have my recommendations listed below and it's a little bit of everything. These parts are the best when it comes to cost vs functionality: Base Plate Kit - # BX2199 Tow Bar (with Safety Cables) - # e47ZR Wiring for Lights - # RM-15267 Relay - # RM-88400 (so brake lights work correctly) Brake System - Part # DM86VR for Hydraulic Motorhome Brakes or Part # DM26VR for Air Motorhome Brakes The Blue...
view full answer... - Recommended Tow Bar Wiring For A 2023 Chevy ColoradoYes we have just the thing. I recommend the Roadmaster diode kit # RM-15267. This will come with everything you need to wire to the vehicles tail lights, and to connect to the motorhome. You will mount a 6 pin plug on the front of the truck, and use the included coiled cable to connect the truck to your coach. I really like these kits because once it is installed you do not have to mess with it. You just plug in and go. I have linked our install video below. If you plan to install yourself...
view full answer... - Parts Needed To Flat-Tow a 2020 Jeep JL WranglerIn order to flat-tow a 2020 Jeep JL Wrangler you'll need base plates, tow bar, safety cables, wiring harness, and braking system. I have attached my recommendations for each of these below. etrailer Invisible Base Plate Kit part # e98948 etrailer SD Non-Binding Tow Bar part # e34ZR Blue Ox Patriot Portable Braking System part # BLU37TR Roadmaster 12 Volt Outlet Kit part # RM-9332 Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267
view full answer... - No Running Lights on 2019 Jeep Cherokee Behind MotorhomeI would love to help but in order to do so I would need to know exactly which flat-tow wiring harness you have and how it is installed. For example, if you are using the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 then the running light circuit is spliced into behind the tail light and then run up to the vehicle side trailer connector with a diode in between. I have attached a wiring diagram of this for you as well. I recommend you check to make sure you are...
view full answer...
- Recommended Flat Towing System For 2016 Jeep Wrangler Unlimited with Front Mounted HitchFor your 2016 Jeep Wrangler Unlimited with front mounted hitch like # 31432, you will either need to remove the front mounted hitch to install a base plate system or replace your factory bumper. I recommend going with an aftermarket bumper option like # AA2156000 or # RA88509 for your bumper and then using the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1 for your tow bar. Then for the rest of your system, I recommend the following: Roadmaster...
view full answer...
- Will The Demco Dominator Tow Bar Work With Blue Ox Base Plate For A 2022 Ford Escape Hybrid?To be able to use your Demco Dominator Non-Binding Tow Bar # DM9511008 with Blue Ox Base Plates like the Blue Ox Base Plate Kit # BLU55XR, you're just going to need the Demco Tow Bar Adapter for Blue Ox Base Plates # DM9523041. This adapter will work great with the base plate mentioned and will work great with your Demco Dominator Tow Bar. Additionally, if you wanted to complete your flat towing setup you're going to also need: -A wiring kit # RM-15267, -A charge line kit # RM-156-25, & -A...
view full answer... - Recommended Flat Towing Components For A 2017 Lincoln MKX Baseplate installs typically take the better part of a day to complete as you're typically pulling the entire fascia/bumper off and most of the time doing quite a bit of drilling or trimming to get a baseplate like the # BX2673 installed. We typically schedule a full day for baseplates because things don't always want to run smoothly. Your motorhome should have a 7-way on the back of it, if not then you'll need part # ETBC7 and some additional wire # 10-2-1 to run up to the front of the...
view full answer... - Does Blue Ox Base Plate BX1143 Fit 2022 Jeep Cherokee Trailhawk with Front Tow HooksThe correct Blue Ox Base Plate Kit for a 2021 Jeep Cherokee Trailhawk is part # BX1143. The Trailhawk models all have tow hooks which the base plate kit actually replaces so there will be no issues. This will work great with the Blue Ox Alpha Tow Bar part # BX7380 as well. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies...
view full answer... - Troubleshooting Roadmaster Smart Diode Kit Install Where Lights are Dim and HyperflashIt sounds like there is some wiring issues going on with the diodes of the Roadmaster Smart Diode Kit part # RM47ZR or your Wrangler does not have the ParkSense feature. This is designed to convert the 12 volt signal from your RV to the 9 volt power that your 2022 Jeep Wrangler Unlimited uses for it's taillight circuits so since you are seeing dim voltage which is usually associated with lower voltage than required to operate a light and hyperflashing my first thought is that something...
view full answer... - What do I Need to Flat Tow a 2-Wheel Drive 1996 Jeep Cherokee Behind an RVBefore towing your Jeep I recommend checking its owner's manual for any restrictions on it. From my research that Cherokee cannot be flat towed if it has an automatic transmission. The manual transmission can be though. The Blue Ox base plate kit that fits your 1996 Jeep Cherokee is part # BX1110. I've linked a video of the kit being installed on a 1997 Cherokee for you. You didn't say exactly which tow bar you have but it works with pretty much all of them. If the Jeep can be towed...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Michael H
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Amber S
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Schuyler H
Video by:
Ethan H
Video by:
Rick G
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Rachael H
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Matthew E
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dale
4/17/2024
System has worked great on several trips in the last year. Including a 5,407 mile trip out west.