We'll connect you with nearby partnered installers who know this exact setup.

Roadmaster

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

Part Number: RM25EQ

3686 Reviews | 7 Questions

In Stock

$575.00

Retail:$632.50

You Save: $57.50

Not Confirmed to Fit

2003 Subaru Forester

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

roadmaster tow bar base plate removable draw bars partially hidden direct-connect kit - arms

roadmaster tow bar base plate removable draw bars partially hidden rm25eq

roadmaster tow bar base plate removable draw bars twist lock attachment direct-connect kit - arms

roadmaster tow bar base plate removable draw bars twist lock attachment

roadmaster tow bar base plate removable draw bars

roadmaster tow bar base plate removable draw bars direct-connect kit - arms

roadmaster tow bar base plate partially hidden rm25eq

roadmaster tow bar base plate twist lock attachment rm25eq

roadmaster tow bar base plate twist lock attachment partially hidden

Show All (10) Product Images

Show Fewer Product Images

In Use/Installed

0 tow bar base plate roadmaster removable draw bars partially hidden direct-connect kit - arms

0 tow bar base plate roadmaster twist lock attachment partially hidden rm25eq

Show All (2) In Use/Installed

Show Fewer In Use/Installed

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Designed for use with motor-home-mounted tow bars, the direct-connect brackets are virtually invisible, easy to mount and remove, and they eliminate the need for a quick-disconnect crossbar on your tow bar. Installs on your vehicle's frame. Great Prices for the best tow bar base plate from Roadmaster. Roadmaster Direct-Connect Base Plate Kit - Removable Arms part number RM25EQ can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (3686)
Q & A (0)
Related Parts
Photos

Roadmaster Tow Bar Base Plate - RM25EQ

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Ready for Flat Towing: Creates solid attachment points so you can safely tow your vehicle behind your RV.
Blends In When Not Towing: Hidden brackets sit back in the grille for a clean, factory-style look.
Quick Hookup and Release: Twist-lock arms click into place and remove easily with built-in pull rings.
Built to Last: Computer-cut, all-steel construction with black powder coat resists corrosion and wear.
Simple Installation: Mounts to the frame with no welding required for a custom, secure fit.

Features to know about

Made for a Clean Front End: Hidden Direct-Connect Design

If you care about a clean look when you’re not towing, this setup fits the bill. The direct-connect design eliminates the need for a quick-disconnect crossbar, leaving the brackets virtually invisible once the removable drawbars are off. The brackets sit far back within the grille area so they stay protected from scrapes and out of sight when you’re driving around town.

Connect and Disconnect in Seconds: Twist-Lock, Pull-Pin Arms

Hooking up is quick thanks to the twist-lock attachment system. Each arm slides into its bracket and clicks into place, and when it’s time to remove them, you just pull the built-in ring to unlock, twist, and slide them out. It’s a simple mechanical setup that makes it easy to go from travel mode to daily driving without tools or hassle.

Built Strong for the Long Haul: All-Steel Construction with Powder-Coat Finish

The computer-cut, all-steel build gives this base plate exceptional strength for towing duty. It bolts directly to the vehicle’s frame—no welding required—and has a durable black powder coat finish that resists corrosion over time. The solid construction adds confidence for long-distance trips and helps maintain reliable performance mile after mile.

Simplifies Setup with Matching Hardware: Designed for Roadmaster Tow Bars

This kit is built specifically for use with motor-home-mounted Roadmaster tow bars such as the Nighthawk, Sterling, Blackhawk, Blackhawk 2, Falcon, or Falcon 2 that slide directly into a trailer hitch. The base plate provides secure attachment points right on the frame and comes with all mounting hardware and instructions so you can get your towing system dialed in with minimal guesswork.

Specs

Features

Designed for use with: motor-home-mounted tow bars
Direct-connect brackets: provide attachment points for your motor-home-mounted tow bar
Streamlined design: creates supremely clean look
No obtrusive quick-disconnect crossbar: ensures a neat appearance
Hidden brackets: sit even farther back than standard brackets
Drawbars: attach and remove quickly and easily
Arms: click to lock in place in brackets
Built-in pull rings: let you unlock arms so you can twist and remove them
Computer-cut, all-steel construction: provides exceptional strength
Black powder coat finish: durable and corrosion resistant
Simple installation: no welding required
Custom base plates: ensure a perfect fit for your vehicle
Compatibility: Compatible with Roadmaster motor-home-mounted tow bars only
Included components: Instructions and mounting hardware included
Country of origin: Made in the USA
Warranty: Limited Lifetime Warranty

Note

Note: Roadmaster direct-connect base plates will only work with Roadmaster tow bars that slide into a trailer hitch, such as the Nighthawk, Sterling, Blackhawk, Blackhawk 2, Falcon, or Falcon 2. These base plates will not work with tow bars that require a hitch ball.

523228-5 Road Master EZ-5 Base Plate Kit

Installation Details RM25EQ Installation instructions

This Product Fits The Following Vehicles

2024 - 2026 Chevrolet Trax excluding ACTIV

Customer Satisfaction Score:

90% were satisfied with this product

10% of customers were not satisfied

etrailer mistake
Too difficult to install

10% of customers were not satisfied

etrailer mistake
Too difficult to install

4.8

3686 reviews

5 Stars		(3211)
4 Stars		(315)
3 Stars		(67)
2 Stars		(30)
1 Star		(63)

by: Larry 09/22/2026

Pathetic and just talking to Noah he states he will get to my issue later when he has time!! My car is on jacks all torn apart and I think Roadmaster gas misled advertising. This 523228-5 baseplate is NOT MADE FOR 2026 CHEVY TRAX!!!

Mike L.

9/23/2026

Which trim is your 2026 Chevy Trax? Per Roadmaster, the # RM25EQ (523228-5) fits all trims of the 2026 Trax except the ACTIV trim....

Larry

9/23/2026

The 523228-5 DOES NOT FIT MY 2026 CHEVY TRAX LT! Look at the side braces in your video of a Demco base plate install (upside down "U"). That is what is needed for my install. In Roadmasters install instructions, page 7, items #2, #3 have no frame in that area to bolt to & #5 has only one ho l e on bact end and putting a bolt in that hole leaves 3/4" short of main base plate. I sent pics to verify this to Noah on 9/22 @ 11:46AM. I know, unless you tried this install personally you are going by Roadmaster's word. BE CAREFUL IN SUGGESTING THIS FIT UNTIL YOU VERIFY. I just do not want someone else to have this experience. Thoughts ?

by: Claus 07/30/2026

2024 Chevrolet Trax

Install instructions were good and as always, one step of teh required modifications was a lot more difficult as the instructions make it sound. In this case, "reaming" out the holes in the bumper core was pretty much impossible with the tools available. Lucky for me, my friend that was helping me actually has a mill in his basement and using that worked.

by: Tom 03/26/2026

by: John 04/03/2025

by: Glen 03/17/2025

by: Monte 05/08/2025

by: John 07/15/2026

2026 ford Ranger

Had these installed at Lester’s Automotive in Boerne,Texas…First class service all the way. Paul and his crew worked through lunch for over 4 hours to install these on our 2026 Ford Ranger. Also ran the wire and hooked up my auxiliary tow lights. The price for this was very reasonable and would highly recommend them for all r.v. needs even if not real close to the Boerne area. R.V park within reasonable distance if needed.

Click to Enlarge

by: Jeff 02/11/2025

2014 Chevrolet Silverado 1500

Etrailer comes through again! This was a great savings as a used kit, but it was even better than the description online. I have installed (4) baseplates on and etrailer.com has given me great videos to watch and good instructions to follow. Couldn't be more pleased with the quality, service and delivery times.

Click to Enlarge

Gwendolyn Y.

2/12/2025

Install looks great, Jeff! Do you have any plans of where you are going to go this season yet?

Jeff One Year Later

2/12/2026

I’ve pulled the Chevy behind our motor home several times over a the last year. It has worked excellent. And when not in tow the tubing is barely noticeable.

by: James 07/25/2026

2019 Ford Transit T250

This Road Master Direct connect base plate works perfectly for a 2020 ford transit cargo 250! Awesome service from etrailer as usual! The finished product can barely be seen through the front fascia!

Click to Enlarge

by: Mark 02/25/2026 One Year Later

Easy to install needed to replace some fasteners as they broke removing front grill was able to get them from Amazon cheap

Click to Enlarge

Gwendolyn Y.

2/26/2026

Looks great, Mark! Where are you off to next?

by: Crystal 03/28/2026

Awesome instructions! Install was fairly easy. Product is very high quality and solid construction. Thank you E Trailer!

Click to Enlarge

Heather A.

4/10/2026

Wow great job Crystal! It looks great! Also, I couldn’t help but notice “Ski Express” on the car, that’s pretty cool. What kind of work do you do?

Crystal R.

4/10/2026

@HeatherA I’m a pilot car driver. We escort oversized loads across the country. Thanks to E Trailer I was able to add a High pole to my car expanding my business and bringing in more revenue already. Thanks!

by: Arthur 05/29/2026

2015 Jeep Wrangler

It mounted up just as the instructions said it would. From previous research I was not surprised when some of the mounting did not align perfectly. Had to use a dremel tool to make it work. The product looks very sturdy from its design. I’m happy with it and look forward to RV traveling.

Click to Enlarge

by: David 08/01/2025 One Year Later

Chevrolet TrailBlazer

This works perfect with my Roadmaster tow bar. It was a little difficult to install since I had to remove the front end of the Trailblazer, but with the good directions that came with it and some you tube videos made the installation easier.

David One Year Later

8/2/2026

It’s been a great year. No problems with the base plate. Works great with my tow bar. Towed my trailblazer from Texas to North Dakota and back, and several short trips.

Jerred H.

8/2/2026

@David That is great to hear David! Thanks for coming back and sharing that feedback. I appreciate you taking the time.

by: Marc 04/12/2026

2017 f150
Customer service was very helpful. Easy to install. No bumper or grill cutting however, you do loose your front hooks. Nice low profile.

Click to Enlarge

by: Gary 06/18/2025 One Year Later

2013 jeep Wrangler

I bought and installed this tow plate one year ago on my 2013 Jeep Wrangler. I bought this particular plate due to the jeep having a Barricade off-road bumper. This plate attaches a bit lower than other plates and prevented having to modify the bumper. Installation was easy involving only hand tools. The plate comes with all needed bolts and attachments. I have towed this Jeep several thousand miles behind my RV with absolutely no issues. As an aside, I use a Roadmaster Night Hawk tow bar which is also an excellent product. Both are expensive, but I believe cheaping-out on safety is no a good idea. I highly recommend this product.

Gary S. One Year Later

6/19/2026

No issues at all. This is a solid piece of equipment.

Heather A.

6/19/2026

@GaryS Thank you for letting us know! What is your favorite adventure so far?

by: Michael 09/25/2025 One Year Later

I have lots of issues with this tow bar. Initial installation was difficult due to a tight fit. Had to have my mechanic cut holes in frame to get bolts attached. After a few times of use the bolts failed causing the bar to fall fwd that then damaged my hitch arms. To fix I drilled new hole through bar and frame securing it with a #8 bolt. To reinforce it I used turnbuckles attached to my bumper. last tow finally went well.

Click to Enlarge

by: Joe 05/19/2026

It’s a super strong and wonderfully engineered addition to my new Maverick pickup.. Couldn’t be happier with it!!!!! Well done!!!!

Click to Enlarge

by: John 10/09/2026

The product is great - I gave 4 vs 5 stars only because I had to drill the rear holes out as they did not align with the holes in my frame and I had to drill out the hole in the bracket to align with my frame extension hole, again bracket did not align with the existing hole. However, in general it appears to be a solid mount.

by: TC 10/10/2026

Great Base plate, had to modify the non-oem bumper a little to get the clearance needed to get mounting holes lined up. Once that was done, everything went pretty quickly finished and tested. Towed 600 miles and worked flawlessly. Much better than using the bumper tow points, as they were elevated causing a very bouncy towed on bridge aprons. Bumper tow points also let the towed have minor side to side movement, this does not, so a lot better towing experience.

by: Conrad 10/14/2026 One Year Later

I really like the way it is hidden and doesn't stick out like a sore thumb. My Rubicon X has a metal skid under the bumper that I cut holes in for the base plate tabs to protrude. I made 5 or 6 trips to my shop to get it right. Would be nice if it came with a paper template showing where to trim. It bolted up perfectly and seems well made.

by: Steve B. 09/03/2025 One Year Later

The Roadmaster Direct-Connect Base Plate Kit has performed flawlessly over the past year. With almost 10k miles logged during our 3 month trip across the US, the components have remained as installed and operated as expected.

Click to Enlarge

by: Bob 04/17/2025

2018 Mazda Miata

I installed this base plate on a 2018 Miata RF. I think I recall something about it taking 3.5 hours and my initial estimate was 3.5 days. It actually took a bit longer than that, but I was not pushing myself and did not have the luxury of having the vehicle on a lift but had it up on two ramps for the front wheels.

The order came pretty quickly, probably about 4 or 5 days between the time I placed it and UPS delivered it. The parts were well packaged and it came with a printed set of instructions. I had watched the video install on another Miata and if it weren't for that I'm not sure I would have tried it. I'm not a pro mechanic by any means but have worked on my own vehicles now for over 40 years. And I'm not a spring chicken either, so all the up and down working on the car can tire me fairly quickly. But if you are not in a rush and go carefully it can be done.

It took a day to do most of the disassembly. I removed both headlights and the intake tube on the passenger side. That tube came out much easier then it went back in.

The next day I got the baseplate mounted which helped to start visualizing how it all would work. All of the holes for the 6mm bolts did not quite line up with the holes in the frame. I had to file one sides worth for a bit of extra clearance. From my experience on this install you really want to leave all the bolt on the loose side till you get everything situated.

A couple of days off for rain and the then I got to work on the bracing. Initially I though I didnt need to cut the top lip of the frame but I decided to go ahead and do it anyway since that part didnt seem to sit flat when bolted from the back end. I'm still not sure its really necessary as the hump clears the metal lip without cutting it.

I also ordered a 14" long 1/2" drill bit to cut the holes in the frame. It was a Bosch bit, wasnt very expensive and it went through the metal like the proverbial hot knife. I managed to get all the big bolts installed in a day with a great sense of satisfaction.

The next day I torqued down all the bolts and the mount felt very solid. They stress that you need to install all the bolts, but honestly I can't see the 6mm bolts doing much compared to the half inch bolts that do most or all of the work. But I put them in and tightened them all the same.

A couple of days spent to install the tail light wiring and then I got back on to putting the front clip back on. My car must have had an aftermarket grill since it did not match the pictures or the video. I tried to position it carefully to see where the parts that were going to stick out would be so I didnt cut out more than I needed to. So there was a good amount of back and forth, cut and fit. In the end I had to make some extra cuts for clearance for the safety cable tabs as well as the mount for the 6 wire connector. Until I made the extra cuts the lower part of the front clip would not seat correctly. Getting the clip in the right position so it fits under the lights also takes some finagling.

Figuring out where all the bolts go back in can be interesting. Take pictures where you can. Dont be too aggressive when working with plastic parts. Overall I'm satisfied with the install, but I have yet to try and hook it up to tow.

Click to Enlarge

Gwendolyn Y.

4/18/2025

Wow, Bob! Thank you for such the detailed review and feedback about how your install went. I also appreciate all the photos you sent as well. I cant wait to hear about how your first tow goes and where you head off to.

by: Roy 03/22/2026

It takes a while. Better if you have a car lift ( we have a lift )

Click to Enlarge

by: Joe 06/01/2025

2002 Honda CR-V. Easy to install. Two and a half hours, and stopped to eat a sandwich. To install the spacers inside the roll frame on the car I used an extension magnet to reach in there and position them. As you can see NO cutting was needed on the bumper cover!
Now I have to figure out the easiest way to run the wiring for the lights.
Thanks Lauren A for your help!

Click to Enlarge

Gwendolyn Y.

6/4/2025

Install for the base plate looks awesome, Joe! Unsure if you have a wiring kit yet but there are a few options so I'll go ahead share them with you here in case you don't yet. The most popular kit would be part # RM-15267. This can be difficult to install but it is the most reliable. I've also linked an install video for this kit. Something that still has an integrated look but easier to install I would go with part # RM-155. You do have to drill some holes into the back of the light housing, so if you're okay with doing that, this may be the better kit. Also included an install video for that kit as well. Hopefully the videos will help you get a good idea of how to run the wiring for your lights. Let me know if you have any questions after watching!

Helpful Links

tv-install-roadmaster-diode-kit-2007-honda-crv-rm-15267.aspx

tv-install-roadmaster-tail-light-wiring-kit-2010-honda-crv-rm-155.aspx

by: John 09/03/2025

Very fast shipping, and the install was easy. Great product

John One Year Later

9/4/2026

After a year of towing my truck up and down the east coast with my motorcoach, I am very happy with this product. it looks as good as the day it was installed and works perfect

Lazer S.

9/4/2026

@John Glad to hear it's been working well for you! What has been your favorite place you have gone so far?

3686

true

Show More Reviews

See what our Experts say about this Roadmaster Tow Bar Base Plate

Do you have a question about this Tow Bar Base Plate?

Roadmaster Base Plate Kit for 2025 Chevrolet Trax
Hey Charlene! Roadmaster actually does make a base plate for your 2025 Chevy Trax. If you do not have the ACTIV trim level you need the Roadmaster Direct-Connect Base Plate Kit # RM25EQ and if you have the ACTIV trim you need the # RM25DQ. Both will work with your Roadmaster Falcon 2 so you won't need a new tow bar. Do you have the rest of your setup already? You will also need the following: -Roadmaster Smart Diode Kit for Variable Voltage Incandescent Tail Lights - 7-to-6-Way Adapter...
view full answer...
Can The 2024 Chevy Trax FWD Be Flat Towed And What Parts Are Recommended?
Hey John, thanks for reaching out. I looked up the online manual for the 2024 Chevy Trax and according to the manual this vehicle can be dinghy towed with all 4 wheels on the ground, or it can be dolly towed with the front wheels off the ground. I included a screenshot from the manual below. I do suggest that you read over your manual and make sure this is consistent with what you see in yours. Also make sure you fully read and understand all of the instructions pertaining to flat towing....
view full answer...
Flat Towing Set Up for a 2024 Chevy Trax RS-2
Hey Mark! The flat towing set up for a 2024 Chevy Trax RS-2 is a bit different. I have listed the parts you'll need below: Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM25EQ or item # RM85EQ if your Roadmaster tow bar is a crossbar style set up. Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM26FR for your Incandescent Lights or item # RO94FR, item # RM-910030-7, and item # RM-910030-5 if you already have the cord....
view full answer...
Parts Needed to Flat Tow 2026 Chevrolet Trax
Hello L; to flat tow your 2026 Chevy Trax you will need a tow bar, base plate kit, safety cables, wiring, and a supplemental brake system. I recommend the following: -Roadmaster Direct-Connect Base Plate Kit # RM25EQ -Roadmaster Falcon 3HD Tow Bar # RM27NQ -Roadmaster 80" Hybrid Coiled-to-Straight Safety Cables # RM-674 -Roadmaster Smart Diode Kit for Variable Voltage Incandescent Tail Lights # RM26FR -Roadmaster Battery Disconnect for Towed Vehicle w/ Flat Tow Brake System # RM-766 -Curt...
view full answer...
Parts Needed to Flat Tow 2025 Chevy Trax LT
Hey Danny, the first thing you need to flat tow your 2025 Chevy Trax is a base plate kit like the Roadmaster # RM25EQ which is a confirmed fit and very easy to connect/disconnect from. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terrain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect. For...
view full answer...
Does Roadmaster Base Plate Kit for 2026 Chevy Trax Fit with Active Shutters
Hey Jeff, I checked with Roadmaster and they do not have any fit exclusions for the base plate kit part # RM25EQ for versions of the 2026 Chevy Trax that have the active shutters so this would work great on your vehicle that has them. Do you have the rest of your flat towing system picked out?
view full answer...
Custom Baseplate Options for a 2026 Chevrolet Trax NON ACTIV Models Without Active Grille Shutters
Hey there, Tina. Great question, and congrats on the new RV setup! For your 2026 Chevy Trax, the Roadmaster base plate kit # RM25EQ can be used with a Blue Ox tow bar, but it would require an adapter to connect the two different brands. The adapter you would need is # BX88185. Since you already have a Blue Ox setup on your Wrangler, the easier option would be the Blue Ox base plate kit # BLU24UR. This is designed to work directly with your existing Blue Ox tow bar, so hookup will be...
view full answer...

Do you have a question about this Tow Bar Base Plate?

Info for this part was:

Edited by:

Lindsey S

Expert Research:

Jameson C

Updated by:

Wilson B

Updated by:

Michael B

Written by:

Amanda K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.