bing tracking image
  1. Tonneau Cover
  2. Retrax
  3. Retractable - Manual
  4. Rack Compatible
  5. Low Profile - Top of Bed Rails
  6. Hard Plastic
RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots
Retrax

RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots

Part Number: RTT-60232
In Stock
$1,849.99
Retail:$1,919.24
You Save: $69.25
Tonneau Cover

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Install crossbars (sold separately) in the slotted rails of this long-lasting cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo. Great Prices for the best tonneau cover from Retrax. RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots part number RTT-60232 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (26)
  • Q & A (0)
  • Photos

Retrax Tonneau Cover - RTT-60232

  • Retractable - Manual
  • Rack Compatible
  • Low Profile - Top of Bed Rails
  • Retrax
  • Hard Plastic
  • Matte
  • Opens at Tailgate

Install crossbars (sold separately) in the slotted rails of this long-lasting cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.


Features:

  • Custom-fit tonneau cover protects your cargo and your vehicle's bed from the elements
    • Deters theft and keeps your cargo out of sight
    • Reduces wind drag and improves fuel economy when closed over truck bed
  • Retractable design allows for full truck bed access in seconds
    • Sealed ball-bearing rollers help cover roll smoothly without need for lubrication
    • No joints or hinges to trap dust, wear out, or freeze
  • Locking handle lets you easily open and close the cover, and secure it at any point along the rails
    • Latch it partially open to conceal cargo in the front of your bed while leaving room for oversized loads at the rear
    • Close and lock the cover for maximum security when used in conjunction with your locked tailgate
  • Built-in T-slots let you mount your ladder rack or roof rack crossbars to the side rails
    • Compatible with Thule, Yakima, Rhino Rack, and more
  • Space-saving canister stores retracted cover and shields it from the elements
    • Spiral track system keeps cover from rubbing against itself, preventing wear and tear
    • Angled bottom takes up less space in your bed, leaving more room for cargo
    • 2 Drain tubes included to let out any water that gets inside canister
  • Side rails sit 1" above truck bed for a low-profile look
  • Superior protection for your cargo
    • 5/8" Thick metal I-beams embedded every 4-3/4" for impact resistance
    • Weather stripping and foam seals on all sides keep moisture, snow, and dust out of bed
    • Cover overlaps top of tailgate to prevent water from leaking inside
  • High-quality polycarbonate (Lexan) withstands UV rays and won't deteriorate over time
    • Matte black finish is scratch resistant and won't fade in the sun
  • No-drill installation - rails easily clamp onto your truck bed rails
  • Made in the USA


Specs:

  • Weight capacity: 200 lbs evenly distributed
  • Canister dimensions: 13-1/2" deep x 12" tall
  • Limited lifetime warranty


The RetraxONE XR offers excellent security and protection for the items in your truck bed. This tonneau cover can withstand impacts and inclement weather, and it can perform in temperatures between -50 and 200 degrees F. It won't swell in the heat, contract in the cold, or crack in ice storms, unlike some other tonneau covers out there. You can also secure this retractable cover at any point along the rails with an easy-to-use, locking handle, all to ensure that your gear stays safe and protected. And accessory T-slots are built into the rails so you can add a ladder rack or roof rack to carry cargo above your bed without interrupting the functioning of the cover.


Smooth, Retractable Operation

Retrax sealed ball-bearing rollers

This tonneau cover retracts quickly and easily for complete truck bed access. It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The RetraxONE XR has no joints or hinges that can wear out, freeze, or trap dirt. It does not need to be lubricated and it has no springs that can fail. Unlike other truck bed covers on the market, you won't have to struggle with pull straps, hook-and-loop fasteners, or snaps every time you open and close the cover.


Retrax pop-up handle

At the end of the cover, on the driver's side, there is a pop-up handle that makes it easy to slide the cover up and down the length of your truck bed with just one hand. The handle must be popped up for the tonneau to move, but you can push or pull the cover to guide it along the rails from either side of your truck.


Retrax spiral track system

When not in use, the cover rolls up into a space-saving storage canister at the bulkhead of your truck, so you'll never have to remove the tonneau to access your cargo. This canister has a unique spiral track system that keeps the cover from coming into contact with itself while it's retracted. This helps prevent wear and tear on the cover while you're opening and closing it.


Retrax canister with drain tube

With the cover fully retracted, the entire canister assembly only takes up a small portion of your truck bed. And the angled bottom of the canister gives you more space to slide long items or small gear underneath it.


Maximum Security and Protection for Your Cargo

Retrax lid covers key

When the RetraxONE XR is closed, potential thieves will find it nearly impossible to access the items in your truck bed. The locking handle is mounted flat and is concealed with a lid, keeping it well hidden from prying eyes. This flat, weather-guarded lid also keeps out dirt and debris to prevent internal corrosion in the keyhole, ensuring that the lock lasts longer and won't seize up.


Retrax lock and pop-up handle

To unlock the cover, lift the lid on the lock, insert and twist the key, and press the button to release the pop-up handle. Once the handle is up, you can slide the cover back.


Latch Retrax cover anywhere on rails

You can latch the cover at any position along the rails by pushing the handle back down. This lock-in-place feature enables you to carry long items that overlap your tailgate while still covering cargo, such as a tackle box, that's stored closer to the bulkhead of the truck.


Retrax cover operates independent of the tailgate

This cover is better at preventing cargo theft than soft covers, which can be cut open with a knife. It also cannot be pried up at the edges like some hard, folding covers. As a result, your cargo and truck bed are secure when this cover is closed and latched, as long as you lock your tailgate as well. Conveniently, the cover operates independent of the tailgate, so you can open and close the tailgate without touching the cover, and you can open and close the cover without disturbing the tailgate.


Retrax weather strip

To keep snow, water, and dust out of your bed, the tonneau cover includes weather stripping and foam seals. An automotive-grade weather strip ensures a firm, dependable seal along the bulkhead of your truck. Attached to the bottom of each side rail is a foam seal that conforms to the shape of your bed rails. These seals help to prevent any scratches on your bed rails as well as fill any gaps to keep your cargo from getting wet or dirty. The cover also overlaps the top of the tailgate for additional protection against intrusive dirt and debris.


Durable, Long-Lasting, and Attactrive Cover

Retrax attractive cover

The RetraxONE XR is constructed of a polycarbonate known as Lexan - the same material used to make bulletproof glass and jet fighter canopies. It has excellent dent and impact resistance to keep it from getting damaged by falling debris. Additionally, 5/8" thick aluminum I-beams are embedded into the polycarbonate every 4-3/4" to give the cover added strength. As a result, this cover can hold up to 200 lbs of snow or evenly distributed weight when it's rolled out.


You'll never have to worry about the cover cracking in the cold or bubbling or fading in the hot sun because it's designed to perform in temperatures from -50 and 200 F, and its hard thermoplastic is UV treated to protect it from fading. On hot summer days, Lexan is cooler to the touch than metal, so you won't get burned when accessing your gear. And on top of that, its durable matte black finish is weather and scratch resistant.


Retrax drain tube

To prevent mildew from forming on the cover while it's rolled up, the RetraxONE XR features a water management system that channels excess water out of the storage canister. Two drain tubes attach to the bottom of the canister to remove any water that gets inside. The tubes then route water through the existing drain holes in the floor of your truck bed, ensuring that the stored cover remains as dry as possible.


Retrax flush design

When rolled out, this tonneau sits nearly flush with the back of the canister to give a streamlined look. In addition to the flush-mounted locking handle, the sleek frame features a top panel that overlaps the bulkhead of the truck and storage canister, eliminating the gap in between.


Retrax extends over 5th wheel

The low-profile side rails mount just 1" above your truck bed, which offers a sleek look while still providing enough clearance for most 5th-wheel hitches to remain installed beneath the cover.


Built-In Slots for Mounting Aftermarket Accessories

Retrax Trax Rail System

Integrated into the side rails of the RetraxONE XR is a track system that you can use to mount your T-slot-compatible ladder rack or roof rack crossbars (sold separately). This way you can haul your bikes and other gear above your cover to free up your truck bed for additional cargo. This Trax Rail System does not interfere with the functionality of the retractable tonneau at all, so you'll still be able to use the cover while your racks are mounted.


To see if your specific Thule, Yakima, or Rhino Rack T-slot-compatible ladder rack or roof rack will work with this tonneau, please refer to the alternate instructions link at the bottom of this page.


Easy, No-Drill Installation

Retrax installation parts

To install the RetraxONE XR, begin by attaching the side rails to the canister with the provided screws.


Retrax installation

Because the cover comes preinstalled inside of the canister, it will take 2 people to lift the assembled unit and place it on your truck. Once the cover is in position, make sure that the side rails are square on your truck bed rails. Then secure them in place with the bolt-on clamps. Finally, install the drain tubes in the canister and route them through the factory holes in your truck bed.



T-60232 Retrax RetraxONE XR Hard Bed Cover w/ Trax Rails - Retractable - Lexan - Matte

Installation Details RTT-60232 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots - RTT-60232

Average Customer Rating:  4.8 out of 5 stars   (26 Customer Reviews)

Install crossbars (sold separately) in the slotted rails of this long-lasting cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.

by:

Awesome product as it was easy to insta ll!



by:

The install was very easy but definitely a two man operation. The section that holds the rolled up cover is pretty large so you do lose some space. That section is also is fairly thin walled. I have dented and scratched it pretty good but it doesn't affect its function. I put one of those cargo load bars across the bed in front of it to try and stop that. I did have it "rack" a little after some rough drives which can cause it to bind a bit when rolling up. But it always closed on the second or third try. And its easy to straighten up again if needed. No water has gotten in the bed and it sure makes grocery getting a whole lot easier. I think its great.



by:

I spent more time getting the cover aligned than assembling and getting it onto the truck bed rails. The instructions are very good. I had to adjust the top jaws of the all the rail clamps since I have the T-slot XR rail system. I used a thin piece of cardstock to check for unwanted clearance between the jaw and truck bed flange. Since I didn't have a very large drill bit, I used a Dremel sanding bit to enlarge the pilot hole that I drilled through the plastic bed plug for the drain tube. That worked fine. The cover looks great and seems to operate well on this first day of installation and use. The T-slot rails do not get in the way of using the hand-holes for the rear step bumper.



by:

The install is complete. I'd prefer a hard copy of the directions. The little point and shoot QR code took me to the wrong cover. After a little work I did find the correct one. This added a good 30 minutes to the install time. Little trouble with the adjustment. I might have to adjust a little more in the days to come. I'm conservative with the 4 star rating. Time will tell, could move to 5. The MAJOR concern...the delivery company delivered it to the wrong address. Thankfully I have honest neighbors otherwise someone would have been out $[XX].

I'd have a conversation with the delivery company if I were y'all.



by:

So far I have about 10000 miles on this set up and the Retrax cover has been great, love being able to keep prying eyes off my gear and water infiltration has been minimal. This is the plastic version and seems to be holding up fine to the elements thus far…time will tell, there is a slight loss of cargo space with this unit installed but it hasn’t been an issue for me. I am very happy overall to this point.



by:

The product quality is very good, and I anticipate many years of useful service. Regrettably, the assembly directions are somewhat superficial. Identifying hardware (i.e.: screw size, color, etc.) is particularly challenging as there is not an actual size comparison chart. Properly aligning the product was also very difficult, multiple attempts were required.



by:

Shipping was fast. Everything arrived in tact.
The instructions for the cover were fairly easy to follow and it fit our 2023 Canyon Denali with a spray in bedliner perfectly.



by:

etrailer had excellent communication and the cover came in sooner than expected. The Retrax cover was flawless and had excellent instructions for easy installation!



by:

Excellent shipping. No damage. Installation instructions were easy to follow. No complex tools needed. Lightweight product. Easy lifting and maneuvering into position.



by:

Looks very sharp and fits well on my 2022 Silverado 1500 5'8" bed, and the fits well with Rihno Rack heavy duty crossbars 65" long.



by:

Fantastic cover. Perfect for my needs. Performs better than I imagined it would. Ability to access bed instantly with supplies... Yakima rack on/off in literally less than two minutes. Drive a black limited Tacoma. Perfect match for this truck. From sleek to bound for the trails in no time.



by:

Works good overall. Opens, closes and locks very well. I get some water coming in on the sides , driving in the rain. Not pleased with the connections on the drain tubes. I have had to glue them in more than once, even during initial install. I did not like the fact that I had to drill those 1/2" holes in the bed for them as well.



by:

E trailer is great. But when the cover arrived and I installed it the cover had a hole in it or a small flaw



by:

Installation went well. Quality workman ship.



by:

Product very good. Drain plugs could fit better keeps popping out



by:

I have seen this product on other trucks and liked it. It was fairly easy to install(some good videos on[line]) my son helped me, two people make it go faster and easier. Thanks for the good service and price.



by:

Looks good and feels sturdy



by:



by:



by:



by:



by:

Still works great. Been outside in the elements for a year. Looks and functions great.



by:

perfect fit. solid build. Fast shipping



by:



by:


25
26
Show More Reviews

See what our Experts say about this Retrax Tonneau Cover

Do you have a question about this Tonneau Cover?


Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Wilson B
Updated by:
Wilson B
Employee Erin H
Updated by:
Erin H
Employee Mark S
Updated by:
Mark S
Employee Jason W
Written by:
Jason W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.