In-stock alternatives that can ship today
Stromberg Carlson's universal RV ladder can be attached to an RV with either a contoured or straight rear wall. The rustproof aluminum ladder fixes securely to the RV for a safe, strong hold when you're climbing up and down it. Black color.
Features:
Specs:
Note: The legs of the ladder can be trimmed for length with a hacksaw or tube cutter. When you are installing mounting brackets and support pegs, make certain that all screws are fastened to the RV's blocking or subframe on roof. If you are uncertain if your RV has backing installed, you should contact your RV manufacture to confirm. It is unsafe to use a ladder that is not connected to the RVs backing or sub frame
Stromberg Carlson's RV ladder is truly universal. Its unique design allows you slanted rear walls. Its length can be customized, and all necessary parts are included for installation.
The ladder attaches to your motor home's roof with pivoting mounting brackets, allowing you to position the angle of the ladder so that it remains parallel to the back wall of the RV. This works great for RVs with roofs that are curved toward the back. If the roof is curved toward the sides of the RV, you can simply trim the inside leg of the vertical portion of the ladder that attaches to the roof. In doing so, you will eliminate the difference in the slope between the inside and outside arms of the ladder.
For an RV with a slanted or contoured rear wall, install the included hinges between the lower and upper sections of the ladder at the point where the wall is curved or angled. If your RV has a straight rear wall, just slide the lower ladder into the upper ladder, bolt the sections together with the provided hardware, and then place the lower stand-off close to the hinge to prevent flexing.
Set the length of the ladder by trimming the lower portion where it connects to the upper portion. Make sure that the bottom step of the ladder sits between 6 and 12 inches from the top of the bumper.
The included ladder support pegs, or stand-offs, attach between the first and second steps from the top and at about 8 to 10 inches below where the two sections of ladder connect. These supports provide additional strength and keep the ladder 5 inches away from the RV's rear wall.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (48 Customer Reviews)
Stromberg Carlson's universal RV ladder can be attached to an RV with either a contoured or straight rear wall. The rustproof aluminum ladder fixes securely to the RV for a safe, strong hold when you're climbing up and down it. Black color.The ladder is a disappointment. This black ladder was supplied with all bright hardware, the hinges to join the sections are a VERY sloppy fit as is the top section that goes the roof. The stand offs and lower J section put the sharp ends of the tubing in direct contact with trailer skin. I fabricated aluminum plates to correct this deficiency and joined the sections with copper tubing inserted inside the ladder tubing 6 inches on each side of the joints. See these in the pictures provided. I am pleased with final result but the manufacturer should have done the extra work and engineering not me. I would only rate this product and overall experience as 2 stars.
Well built and designed takes a bit of time and effort to fit The ladder to your specific RV but with some hack sawing and drilling it even fit my leisure travel van which has more curves then a play boy fold out Didn't get a five because the hardware was still galvanized and having paid double for black paint the hardware and flex hinges should've been black tool
Product was received undamaged and all pieces and hardware accounted for. Instructions for assembly could have been more detailed but we're adequate for a person of moderate mechanical aptitude. As with most after market accessories, a moderate amount of improvisation was required. Since I was unable to anchor the rooftop section as well as horizontal supports to structural sections in all cases, I had to incorporate hollow wall anchors for horizontal supports as well as aluminum structural angles to mount roof anchors. Allow about 12 hours start to finish. As is always wise advice: measure twice and cut once. Also, make use of a good level often during installation process. Finished product was sturdy and plumb.
PRODUCT WAS SHIPPED AGAIN IN ITS ORIGNAL PACKAGE FROM THE FACTORY AND WAS COMPLETLEY DAMAGED ... IT MAKES NO SENSE ETRAILER CONTINUES TO SHIP PRODUCTS IN MANUFACTORS BOX THAT WAS NEVER DESIGNED TO BE THROWN AROUND A DELIVERY TRUCK ,,, ;[;[;[
Sierra K - 11/24/2021Fast shipping, great products every time I order.
Sexy new ladder replaced the original. Must be made for the newer larger Rvs, but we customized it for me. Sturdy and good looking.
Well made product, easy to modify for universal applications. I was able to cut to length and install the ladder in about 1 hour of work. My suggestions for improvement would be to have black mid ladder couplers, instead of just silver galvanized, to match the black ladders, and to provide mounting inserts for fiberglass wall trailers with the kit.
Andrew D - 01/08/2020The ladder is well made and it was shipped quickly. Installation was straight forward. My only reservation is the manufacturer provided hardware is not black. When you spend twice the price to purchase the black anodised ladder the hardware looks terrible. I wound up painting all the screws and hinges black to get a factory look. Spend the time to think about your particular installation and dry fit everything before you do the final install. It looks great and seems very sturdy.
J-CC - 07/30/2018This is a good, universal ladder replacement option. I would have much preferred a true replacement, rather than a universal substitute for it, but this did the job. You don't have to be a mechanic to install it, but you do have to cut some pipe and do a little work to customize it for your RV. My disappointments were that the brackets/mounts were rectangular, while my old ladder's were round. I would have had to plug the old holes in the side of my RV and drill new ones for these mounts. I ended up using some parts/brackets from my old (broken) ladder and some from this one to utilize my existing holes in the RV siding. Also, I paid considerably extra for the black ladder over the aluminum finish, and was disappointed that the connecting piece used to connect the top and bottom halves of the ladder was silver/metal color (I painted it black for my use). Bottom line. This will likely meet any ladder need you have, but it won't "replace" your original factory ladder.
Quality product, as advertised, and EXTREMELY FAST SHIPPING! The "Black" color is true and strong. Precise instructions for installation and modification included. It fits my new Forest River 326RL, has swivel if bend is needed instead of straight. It can be cut down for shorter installation. A very safe product if installed according to instructions.
walter h - 03/24/2018The ladder came with an essentially destroyed box. However, all the parts seem to be there and as of right now no damage to the ladder. However, will check when installing
Just what I needed and it work great!
Works great. Had to do small modification for our application, but it worked out. Check your box when it arrives though, as our box was all but destroyed. Fortunately everything was still in the box.
It arrived 3 days ahead of schedule!! It It is every thing and more than I expected.
Good quality. Easy to assemble. Fantastic communication by etrailer.com. Quick turnaround time from order placement to delivery. Will definitely order from them again.
I was thrilled to find a black metal ladder. This will work perfectly for our roof top deck, and great instructions as well. I love that you can cut it to fit your specific needs.
Paid a fair price for the ladder. It arrived promptly and was easy to install. Looks and work as good as the original (you know, the one I had before that tree thing).
Great service. Arrived on time.
Excellent replacement ladder. Was able to use existing standards and avoided drilling new holes in the RV. Web site user friendly, delivery quick, and product exactly as described. Highly recommend e-Trailer.
Delivered on time as promised. will be ordering more products
dealing with Danny with etrailer.com was a very good experience he supplied me with a high quality latter immediately the latter is very attractive and sturdy
Fast free shipping. Product is as described. etrailer is always easy to deal with. Excellent stock of parts and speedy delivery
I used this as a ladder from the shop floor to an above floor utility room. I'm not sure this use would be helpful to your RV accessory customers.
I'm in the RV business and etrailer has come through for me time and again. Whatever you need they usually have and are eager to get it to you right away.
Do you have a question about this RV Ladder?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.