When you’re carrying serious weight, you want a wheel that’s ready for the job. This Lionshead Aluminum Talon wheel has a 2,600-lb load rating, giving you dependable strength for long hauls. The 18" x 9" rim and +12mm offset are built to handle the demands of steady towing without flex or fatigue.
Loose lug nuts can ruin a good trip. The beveled stud holes on this wheel seat tight against the hub, keeping your connection secure and cutting down on retightening after long drives. It’s a simple design tweak that makes a real difference in how solid your setup feels mile after mile.
Exposure to water, salt, and road grime can take a toll, but this aluminum wheel is made to fight back. The corrosion-resistant build holds up through dock launches and wet conditions, keeping its structure sound and its finish clean season after season.
If you like gear that works hard and looks good doing it, this wheel delivers. The black powder coat finish gives it a clean, straightforward style that complements nearly any trailer setup. The strong spokes add a purposeful look while helping keep weight balanced for smooth towing performance.
This wheel uses one of the most common fitments around — a 5 on 4-1/2" bolt pattern with a 3.19" pilot diameter and 1/2"-20 wheel bolts. That means it seats easily on matching hubs with no surprises when it’s time to bolt everything together and get rolling.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer. Today we're gonna take a look at the Lionshead 18-inch by 9-inch Talon black aluminum trailer wheel, with the five on 4-1/2-inch bolt pattern. Now this wheel is an aluminum wheel. It's very durable, lightweight, and a rust-proof. This wheel is normally used with a 245/45R18 tire size on a boat trailer. The design is the attractive Talon Series, which you can see is a 10 spoke design, has an all black finish, and then they have a machine finish just on the edge of each spoke.
They do use an automotive grade clear coat finish on the front to help protect from any scuffs and scratches. Now this wheel does have a positive 12 millimeter offset, which means when you bolt this two year trailer, it will move the wheel towards the frame of the trailer. This wheel does have steel inserts in it, which is nice. The steel inserts right here in the lug nut wells help keep your wheel securely in place on the trailer hub. Prevents those holes from elongating, eliminates the need for constant re-tightening of your lug nuts.
If you notice, it does include a valve stem, which is installed in the wheel. Now this does not come with a center cap. If you do want a center cap, we do sell those separately on our website. You do wanna make sure to get a center cap that'll have the same diameter as this pilot hole, 'cause when you install that center cap, it'll go through this hole. Pilot hole diameter is 3.19-inches.
This wheel does meet the DOT, Department of Transportation, specification and the SAE J1204 standards. Few measurements on this, the diameter, again, is always measured inside to inside. So if we take our tape measure and if we go inside to inside, there's your 18-inch diameter. The width of the wheel is gonna be the same way, it's bead seat to bead seat. So inside to inside.
There's your 9-inch width. Now this wheel does have a bolt pattern of five on 4-1/2-inches. And if you want to measure the bolt pattern on a wheel like this, that's an odd number of lugs. What you need to do is just pick one of the holes, let's say this one, and then you're gonna measure across to either one of these holes. But when you measure, it's from the center of the starting hole to the furthest edge of whichever hole you measure to. So on this one, it's gonna measure 4-1/2-inches. This tells you it's a five on 4-1/2-inch bolt pattern. Again, we mentioned the offset of positive 12 millimeters, does use a wheel lug size of 1/2-inch by 20, and the weight capacity on this wheel is 2,300 pounds. Now if you do have any other additional questions regarding this part or any other item that we carry, please feel free to reach out to us so that we can help you get all your questions answered for you. But that's gonna do it for a look at the Lionshead 18-inch by 9-inch Talon black aluminum trailer wheel, with the five on 4-1/2-inch bolt pattern.
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
Ratings & Reviews
Condition: Surface Scratches
Notes: The face of the rim has scuff along the lip, otherwise in like new condition.
Condition: Surface Scratches
Notes: There are scratches and paint chips along the rim of the wheel. Otherwise, new and unused.
Condition: Badly Dinged
Notes: Item has a large ding/chip along the edge as wella s a few minor cosmetic scratches. Otherwise unused.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.