Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This aluminum wheel is made to handle real-world hauling. It’s rated to 2,200 lbs and built with a 14" diameter by 5-1/2" width rim, giving you a strong, lightweight setup that holds up under load without adding unnecessary weight. The 5 on 4-1/2" bolt pattern and 3.19" pilot diameter make it a dependable, easy fit when strength and precision matter.
Wet roads and long miles can wear out lesser wheels fast. The Trinity Series design uses aluminum that’s fully rustproof and topped with a glossy enamel coating that stands up to moisture and road grime. You get lasting corrosion protection along with a sleek, modern finish that keeps its look even after years of use.
If you like your setup to look as good as it performs, this wheel nails it. The bold 5-fork Trinity design combines black spokes with machined silver accents for a clean, modern style that stands out without being flashy. It’s an eye-catching upgrade that instantly freshens up the whole trailer’s appearance.
Every piece counts when you’re finishing off a build or upgrade. This wheel comes complete with a center cap and valve stem so you can get it mounted straight away without hunting for extra parts. It’s built to SAE J1204 standards and backed by a 5-year warranty against structural defects for confidence down the road.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the 14 inch by 5 1/2 inch Trinity Series black machined aluminum trailer wheel. Now, this is an aluminum wheel. It's very durable, lightweight, and rustproof. We mentioned it is the Trinity Series, which is a five-fork design in the black color, has the machined silver accents right here on the edge of the spokes and even on the outer lip to provide a nice, bold, sleek look.
The glossy black enamel coating resists corrosion. If you notice, it does come with the center cap. And what's nice with this center cap, if you look close, you'll see it has the outer or the plug here in the middle, and what that does is that'll pop off. And what that allows is when this is installed, if you happen to have E-Z Lube axles on your trailer, which are the ones that have these grease zerk fitting on the spindle that allows you to grease the bearings without having to take off the wheels and tires to access it, all you have to do is pop off that center cap or that center lug, center plug here, and that'll get you gain access to grease the zerk fittings without having to take off your whole wheels and tires. Also, if you notice right down here, the valve stem is included, it's pre-installed into the wheel.
Now, this wheel does meet the SAE J1204 standards. A few measurements on this, it's 14 inch diameter, and that's always measured inside to inside. So just to show you, if we take our tape measure, and if we go straight across, there's your 14 inch diameter. The width, same way, will be measured inside to inside, so bead seat to bead seat, 5 1/2 inches. Now, the bolt pattern on this wheel is a five on 4 1/2 inch bolt pattern.
And if you want to measure the bolt pattern on a wheel like this, that's an odd number of lugs, five, what you'll do is just pick any hole, let's say this one, and then you'll measure across to either this hole or this hole. But when you measure, it's from the center of the starting hole to the furthest edge of whichever hole you measure to. So on this one, if we measure it to be 4 1/2 inches, the wheel lug size it uses is a 1/2 inch by 20, pilot hole diameter, which is the large hole here that your center cap goes through, the diameter on this pilot hole is 3.19 inches, and the weight capacity on this wheel is 2,200 pounds. But that should do it for a look at the Taskmaster 14 inch by 5 1/2 inch Trinity Series black machined aluminum trailer wheel.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Mike L.
8/26/2026
Thank you Andy, I'm glad we could help!!
Gwendolyn Y.
3/11/2025
Those rims look awesome! A definite upgrade from the OEM. When's the next lake weekend?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
2/15/2025
That looks sleek, Terry! I like how they add depth to the color of the rig and highlight the accent colors. It is very eye-catching! Do you have any fun upcoming trips planned?