Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This light puts out a bright, crisp white beam that makes your license plate easy to see. The Great White series uses custom-cut lens optics and two ultra-bright diodes that focus the light right where it’s needed. LEDs also mean you get more light with less power—just 0.01 amps at 12V—so you’re not putting any strain on your trailer’s electrical system.
Forget about swapping bulbs or dealing with broken filaments. The LEDs in this light last up to 50 times longer than incandescent styles. They’re more efficient too, turning more of that power into usable light instead of wasted heat. Once installed, it just works, giving you a dependable license plate light that stays bright year after year.
This one’s made to handle regular outdoor use. The durable metal base with chrome housing keeps things solid and corrosion-resistant, while the clear lens protects those white diodes inside. It’s also designed for exterior trailer applications and is waterproof, so rain, spray, or road grime won’t be a problem.
Installing this light is quick and straightforward. It mounts flat against the trailer surface using two bolts with holes spaced 3-1/2" center to center. You only need a small hole for the wiring—a simple two-wire setup with a power lead and ground wire. No extra brackets or complex wiring needed.
When mounted above the plate, a single light meets DOT requirements for visibility. If you’re mounting to either side of the plate, you’ll need two lights for full coverage. However you set it up, it delivers the clean, consistent white light needed for proper compliance on the road.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're taking a look at it a Peterson great white LED license plate light. This is a compact LED light that illuminates your trailer's license plate.LEDs make great replacements for incandescent lights. They last longer, they burn brighter, they're more efficient. With LEDs you don't have to worry about brittle filaments and you don't have to worry about replacing bulbs.The unit has a really nice metal base with a black powder coated finish to resist rust and corrosion and then the housing around the light is a chrome plastic which gives it a really nice look and design. And then we have a clear lens over white LEDs.It mounts on the surface of your trailer. Mounting hardware not included.
And it has a two wire design./ White for ground, black for power. It's department of Transportation approved when properly mounted.We're going to take a look at the dimensions real quick. Then we'll hook it up to power so you can see what it looks like with power running to it. Edge to edge right here is about four inches. Top to bottom measures about one and 5/8 inches.
Very front to very back measures about two and one quarter inches deep. The mount holes on the unit are separated on center by three and a half inches.We're going to go and hook it up to power. That way you can see what it looks like with some power running to it. So again, our white wire is the ground wire and black wire is that main power feed.So here you can see the light sends out a really nice signal. So if we had a license plate mounted below it, it would do a great job at illuminating that.
It's a two diode design. So we have an LED here and a LED here, so the multi diode design really helps optimize that overall light output.That's going to do it for today's look at the Peterson great white LED license plate light.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Nice
Very Nice Item
Great service! Great product!
Great light, easy instal
On time and quality as always
Nice light. Easy website to navigate. Quick and easy to track shipping.
Fast delivery. Replaced the plastic factory broken one. Holes lined up perfectly.
Installed easily and works well
Fit and finish were good and light is working as it should.
Worked as expected-though could be brighter - no issues as of now.
Very good bright light. Running for a year now and no issues.
William
8/9/2025
works great . LEDs are my go to lights from now on.
Delivered on time as promised.
Good product, looks good and works well ..
Robert
4/26/2022
Very pleased with the performance and appearance..
Working great, 1 year later. Perfect fit on my motorhome.
LEDs nice and bright easy to view way better than the traditional incandescent bulbs that were replaced
Excellent product, much better than the plastic one I replaced. Looks good on my trailer.
Reordered after breaking on install. It wasn’t the products fault. Someone shut the trailer door on it just prior to final install and broke the lens. Light still works! Quality product!
Well built, easy installation. Great people to do biz with
Robert
10/23/2022
Great product. Have had zero problems with the well made trailer light, threw rain, snow, and extremely hot west Texas summer. Worth every penny.
The light itself is great! It would work better if there was a deeper recess on the bottom where it mounts to the trailer. This would help conceal the wiring and extend the light toward the rear of the trailer to better illuminate the license plate.
This was a great replacement for the original lic plate light. I did have to drill one new hole because the new light base was a tad wider than the original base. The wiring was very simple: hot and ground and it worked like a champ.
Fast shipping, great quality, excellent service
Great service and fast shipment, thank you!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
2/2/2023
Whirl very well