Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This GloLight Halo LED combines standout looks with real performance. The outer red ring works as a tail light, the center white LEDs flash for turn signals, and both sections brighten for braking. With 21 LEDs drawing only 0.145 amps for tail lights and 0.375 amps for stop/turn at 12.8 volts, it’s far more efficient and durable than incandescent bulbs. The bright, even halo glow is easy to see day or night, so you get reliable visibility without extra power draw.
Water damage can ruin a light fast, but this one’s sealed tight. The polycarbonate housing and tinted acrylic lens are waterproof, making it great for boat trailers or any setup that sees rain, road spray, or full submersion. Once installed, you can count on it to keep moisture out and keep shining bright no matter the conditions.
Getting a snug fit is straightforward thanks to the recessed mount design. It installs in a cutout using grommet A45GB (sold separately), or you can use optional bracket BK45BB (sold separately) if you prefer not to cut into your trailer wall. The standard PL-3 connector works with a 3-prong plug like A45PB or A47PB (sold separately), so wiring is simple and secure without any guesswork.
Safety standards matter when you’re on the road. This light meets DOT, FMVSS 108, and CMVSS requirements, so it’s approved for highway use right out of the box. You get the peace of mind of a tested design backed by a lifetime warranty on the LEDs—solid performance for the long haul.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at and showing you how to install the GloLight LED trailer tail light with the clear lens.What sets this light apart from many of the others is its running light. As you can see, it has that circular halo design, and puts out a pretty good amount of light. Now, when you hit the brake lights, it really makes a difference in how bright it is, to let others know that you're applying the brakes. Same thing with the blinker. As you can tell, it's nice and bright.Another thing that separates this light from many of the others is its clear lens. In my opinion, when the light's not in use, it just gives off a little more of a clean look.
The light is going to have 21 diodes. Its power draw at 12.8 volts, to run the tail light, it's going to take .145 amps; and for your stop and turn, it's only going to use .375 amps. Now that's good, because it'll give you plenty of power to run all your other lights that you might have.This light is sonically sealed, which means it is submersible, however I don't recommend submersing it for any length of time or when you have power to the light.One thing I really like about this light is that it's LED, which that means it's going to be a lot stronger, brighter, and last a lot longer than your traditional style incandescent light, which means it'll be a great replacement or even an upgrade for it.Here on the backside of the light, you can see we have our three connection points. They are going to come covered in dielectric grease, so you don't have to worry about that during your install. Each one actually has a description of what each contact point does.I'll show you just how easy it is to get our light installed.
Just take our connector, feed it through the hole. Just plug it in. Sometimes these lights can be a really tight fit, so if you need to use some silicone spray or even some soapy water to help assist you getting it in, you can do that. Start at the top, put it in first. You'll feel it seat all the way down into the grommet.
It's just that easy. All right, now we'll go ahead and put some power to the light, and make sure it works. If you bought more than one of these lights, you go ahead and repeat the same process on the other side.That'll do it for our look at and installation of the GloLight LED trailer tail light with the clear lens.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Replaced existing incandescent lights in an enclosed trailer. These LED’s are an excellent replacement, are highly visible, and good looking.
I use these for the front side marker/turn signals. I had to reinforce my frame to take them but it was worth it.
These GloLights are a major aesthetic upgrade to most other round-style taillights. Just make sure to get the correct back plug! "RMB" is the symmetric 3-pin and "RB" is the asymmetric 3-pin.
Easy quick process. The company I work for purchased a clement monstar end dump trailer and it came with these tail lights in my opinion they are the best they can be seen at anytime of day and in most weather and a cool design. Ever since I discovered these lights they are the only kind I use on my trailer
I have purchased scores of products online over the years, but this experience was by-far the best. Your website is well organized, well informed, and easy to navigate. The purchasing process went very smoothly, and the products that I purchased were competitively priced. The shipping and delivery was faster than estimated (and frankly, faster than I expected). The shipment arrived well packed, undamaged, and the contents were exactly as advertised. Thank you etrailer.com for a great experience...I'll be back to purchase again!
I really like these lights. I use them for my rear lighting and rear side marker/turn signals. I went out of the way to use these on my trailer which involved reinforcing the frame since I had to cut a large piece out to install them. Well worth it. They are bright and have a distinctive look.
These LED stop, turn, tail lights are an exceptional upgrade. They halo is a great feature and blinker lights are very bright! I truly believe these lights have made my unit safer!!!
Great lights, very bright. I like them because not many people have them and they're very eye catching. My only complaint, is trying to push them in place in the bumper with those rubber grommets, but that would be the case with any sealed light.
Excellent.. still super bright and working well. Your inventory is unsurpassed
Upgrading our 1998 Coleman Grandview, the old incandescent just seemed too dim.
Nice light, only suggestion would be to list some wiring options, was a bit confusing going from the old Bargman to the new LED.
But I read through the Bargman page here and got squared away.
Pic is LED before anchoring compared to the stock on the right. BIG improvement.
These lights were added to my cargo trailer that I pull behind my motorcycle. These help to make sure that people see me when I am on the road. The lights were easy to install with the grommets and pigtails that I ordered at the same time. All the products worked together well and made the project easy to do. Love these lights and will buy more if needed.
Light was exactly what I needed. Came out of the box in excellent condition with grease on the connectors for easy install and water protection. Replaced my burned out light and it worked perfectly.
I upgraded the tail lights in addition to the back up lights. The old lights were incandescent bulbs and weren't really that bright. These new LED tail/brake/turn signal lights are much brighter so hopefully folks behind me will have an easier time figuring out what I'm trying to do while going down the road. Make sure you order the right pigtail connector when ordering the light! I failed to do that which slowed this project down by a few days.
These lights are exactly what I needed to fix my Mastertow dolly. Shipping was fast and the parts had the exact connectors and mounting screws to match.
I like these lights. They appear to be bright in the daylight. Can't ask for me. My trailer is from 1997 and they just plugged into the existing wiring.
Great light & SERVICE'' thanks
I ordered LED type tail lamps for my trailer. Take NOTHING for granted! I did that and received two tail lamps with no wiring, no plug-in connecter. Also no way in which to mount these lights. Needed was a rubber, round mounting that I have since ordered along with the needed connector plugs. Had the sales person asked a few questions this second parts order could have been avoided.
Heather A.
5/15/2018
Curt, thank you for your review. This lights are not sold with the rubber grommet or pigtail. The grommet is part # A45GB and the pigtail would be part # A45PB or part # A47PB.
Just as advertised....Wish I would have known there was a bracket available before I ordered them. I had to pay shipping twice because of separate orders.
These lights are fantastic and still going strong
Tom D.
4/2/2019
The lights are as good today as when purchased. Plus great follow-up support
This is a beautiful light - can't wait to get it installed on our fiberglass egg! It's nice to have the flexibility of mounting it in the shell or the bumper as we will mount temporarily on the bumper for transport and then move to a flush mount later for the permanent installation.
I would echo what another reviewer wrote about quality control. When I micro analyze it you can see many fine scratches/imperfections on the red plastic which sits under the clear lens. No one should ever be that close to it to notice but they are there. I just hope the clear lens itself doesn't attract scratches easy but time will tell..... The good thing about these are that they create visual interest and change the look of the trailer for the better. Day time visibility is increased 1000x vs the faded old single incandescent lights I had. Obviously great at night as well. I ordered the corresponding rubber surrounds but couldn't get them to fit. Off the trailer they fit like a glove but the combo proved just a bit too thick in the trailer cutout. Of course it is freezing cold here, when it warms up I will heat up the surrounds to make them more plyable and try again.
Hi would Like to say I never give reviews on stuff , but this company is great to deal with , i had a problem with a order , I gave them the wrong address auto correct changed my address with out me catching it , I called and the Lady on the other end was very help full and guess what spoke English!! No out of country hard to understand customer service! She was very helpful and kind .im going to be a repeat customer for shure , order shipped fast and the lights I ordered are top notch
John
3/20/2018
Had the lights on my semi trailer for a year no problems look great ! I had a few people ask where I got them I did not hesitate to tell them !
Look great, no problems.
These are some pretty sweet lights. Very bright and attention getting. I am constantly getting compliments on them.
The High Points-
- I bought the standard 3 prong style, works just fine with a Truck-Lite plug and with a no name one I had lying around.
- When not using driving lights both the outer and inner lights flash for turn signal. Don't remember reading about that, but it's pretty sweet(at least for the people behind me!).
- All 4 arrived in excellent shape and with all lights working.
Now, for the only negative that I can come up with-
- 2 of the lights have what I think is a sliver of white plastic stuck between the outer circle and the cover. I'm guessing it's from pressing the halves together. They can't be seen until you're very close to them, but for a $28 light it's a bit disappointing for that to get past QA.
Regardless, I highly recommend these, they are very distinctive and so far I haven't seen anyone else with them. Can't wait to be able to afford 4 more!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John M.
7/27/2015
just like a timex watch takes a licking