Setting up on uneven ground or switching between tow vehicles is no problem with this jack’s 10" lift. The topwind handle gives you smooth, controlled lift from a comfortable standing position, and the movement stays steady through the full range. Whether you’re hitching up or leveling for storage, that extra adjustment keeps you from stacking blocks or fighting for the right height.
This jack is built to handle serious tongue weight with a 2,000 lb capacity. It stays solid under load, keeping your trailer steady while you work. The fixed rectangular foot spreads weight evenly on dirt, gravel, or concrete, so the trailer doesn’t sink or shift when parked. It’s the kind of reliability that makes towing and parking simple.
The included weld-on mounting tube and 2" inside diameter pipe connection give this jack a tight, secure hold to your trailer frame. The swivel style lets you swing the jack up and out of the way when towing, then lock it back down with the detent pin when you’re ready to park. It’s quick to use and keeps your setup clean and out of harm’s way.
The enclosed design keeps the gearing protected from dirt and weather, so cranking stays smooth season after season. With its sturdy steel build and straightforward design, this topwind pipe-mount jack is made for years of use without fuss. Easy to install and dependable every time—it just works when you need it.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, it's Brad here at etrailer. And today we're taking a look at the Dutton-Lainson pipe-mounted swivel jack with topwind. Now this jack is rated at 2,000 pounds. So for a small teardrop camper like this, it's gonna be perfect. It's nice and easy to use. And also, having a little bit of ways to store this without having that ground clearance while traveling really makes it nice.
Having a topwind also makes it really easy. You're not having to reach down and really crank a whole lot of your body. You can stand kind of just normal, and it goes up nice and smooth. In fact, this actuating, as I crank it, is really, really smooth, it feels very solid with this jack. Now, here we have it fully extended so you can kind of see, roughly, about how tall it gets, which from the top of the jack here, not measuring the handle, it's gonna be 25-1/2 inches tall.
Now, it has 10 inches to travel, so when it's fully retracted, you're looking at about 15-1/2. Now, the handle does add a little bit here, but not too much as far as height. And also this handle is kind of nice too because it's able to fold down. So when we have it in our stowed position, it's going to be out of the way. Now, your handle is gonna have a radius of 6-1/2 inches from the center pin to the outside.
So it's something to keep in mind when you are gonna be mounting up your pipe jack. If you are welding this on, you wanna make sure that you have enough clearance, that way you're not busting your knuckles or hitting anything while retracting or extending. If you're replacing a existing jack and you already have the pipe mount, that's going to be nice and easy for you. And the installation is just going to be taking this pin out. But if you are mounting it up, not to worry, it's gonna come with the mount here.
You're just gonna need to weld this on wherever you want on your chassis. One of the biggest benefits of a pipe-mounted jack is: the clearance that you're gonna gain. So when you are hooked up to your truck and you're ready to hit the road, it's gonna be easy to just pull this pin. And this is just going to go horizontal. And that way you're gaining a ton of ground clearance. You can see this handle here. You can also just prop this up. So, this keeps any really road hazards from making contact with your jack. Whereas some of your other standard jacks, you'll have to crank 'em all the way up. And sometimes it still sits pretty low. And that's always kind of going through my head when I'm towing, is, "Hopefully, I don't make any bumps and it hits the ground." Or even road hazards like a tire or something along those lines, can get a little bit sketchy. This, you don't have to worry. It's stored up. It's at the same height as the frame of the trailer, so you have nothing but ground clearance. So, kind of added peace of mind while towing. Now, you can see the whole thing has a nice black powder coat finish. And so, not only does it look good on this trailer, but it's also gonna hold up to rust and corrosion. Even when you store your trailer outside, it should look really good overall. And it's just gonna hold up maintenance-wise. Now, you're also gonna see this foot plate is welded on. So it's one piece, you don't have to worry about having that foot plate separate and the pin. It's just gonna be attached to it. So, keeps it nice and simple. Now, if you're looking for something that is a little bit more heavy duty, there's plenty of options available. So matching your weight here with your trailer is gonna be crucial 'cause you're gonna wanna make sure that it can support it. And another thing too that might maybe determine a different jack for you is gonna be maintenance. Some of the other ones have grease zerk fittings mount into 'em. So you can pump grease into 'em. This one looks like it's sealed. So you may just be greasing the shaft here. But again, that's kind of a small thing overall. Generally, these jacks will stay pretty protected, especially with that powder coat finish. But something to keep in mind when making your decision. And that was a look at the Dutton-Lainson pipe-mounted swivel jack with topwind..
Ratings & Reviews
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.