Will The ARK Xtreme Off-Road Swing-Up Trailer Jack Fit A 6" Tall 1-7/8" Wide Frame?

Question

Question:

Does this jack fit the Black Series HQ19 trailer with 6” tall x 1 7/8”wide frame member?

asked by: Paul G

0

Expert Reply:

Yes, the ARK Removable Xtreme Off-Road Swing-Up Trailer Jack # ARK57FR will indeed fit your Black Series HQ19 trailer with a 6" tall 1-7/8" wide frame. The Ark Jack comes with brackets that will fit frames up to 6" tall and 2" wide, so you are still within parameters for fitment. These ARK jacks are extremely solid and easy to use. On/Off is simple, and the dual wheel design will make moving your trailer much easier, especially on off-road or uneven terrain. Certainly a big step up from most other tongue jacks.

expert reply by: Jesse M

0

Answer 1

With the ARK Xtreme Off-Road Swing-Up Jack #ORJW500D in its lowest position it is 6.49" from the center of the mounting point to the top of the jack. The other end of the jack when fully retracted is going to be 18.89" from the mounting…

view full answer...

Answer 2

Hey Chris, the Bulldog jack part #BD190758 would do decently in a saltwater environment but honestly it's not going to last forever. The zinc coating and the powdercoat will eventually allow the steel underneath to corrode. Now if you were to be…

view full answer...

Answer 3

Hello Scott. Again, I can provide dimensions of the Ark Jack #ARK99FR but we do not have any CAD drawing we can send. Only the manufacturer of the jack would have something like that, and they typically do not share these with the general public. We…

view full answer...

Answer 4

It looks like the Curt Trailer Hitch Receiver #C13366 is for the 2018-2020 Volkswagen Atlas but then the Curt Trailer Hitch Receiver #C24ER took over starting with the 2021 model. They look very similar but the dimensions won't be the same which…

view full answer...

Answer 5

Hey David. The Ark Xtreme Off-Road Tube Mount Swivel Trailer Jack item #ARK57FR comes with a mounting bracket and a pipe mount option. I've a attached a diagram below that will show the dimensions of the mounting bracket. It will fit a mounting…

view full answer...

Answer 6

The weld-on mounting bracket for the ARK #AR94FR Drop Down Corner RV Stabilizer Jacks measures 4-5/8 x 2-7/8 inches. The bracket has holes for the hardware that attaches the jack to the brackets. The holes are 2-7/8 inches apart on center. I've…

view full answer...

Answer 7

Hey, Bill! There was a recent design change to the hitch to make the connection between the cross tube and the hitch itself more streamline. Part #e84ZV is the upgraded hitch. I'll include a snip of the differences so that you can see them side…

view full answer...

Answer 8

Hi Justin, great question. The Thomas Payne sofa part #TP76KR is about 22.5 inches wide when it’s in the couch position, and it expands to about 41.5 inches wide when it’s folded out into the bed. The overall length is right around 70 inches, which…

view full answer...

Answer 9

Hi Jeremy; yes the Thomas Payne RV Jackknife Sofa #TP76KR will fit where your existing 70" sofa is now. This is a leather-like material, and will hold up better compared to what you have now. However, it isn't as nice as the newer PolyHide…

view full answer...

Will The ARK Xtreme Off-Road Swing-Up Trailer Jack Fit A 6" Tall 1-7/8" Wide Frame?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching