Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This replacement assembly is designed for Dexter Model 6 trailer brake actuators for disc brakes.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the replacement master cylinder assembly for the Dexter Model 6 Disc Brake Actuators. Now this is a replacement master cylinder assembly that fits the Dexter Model 6 Disc Brake Actuator for disc brakes. It will include everything shown here includes the master cylinder, the cylinder mounting plate, the push rod assembly, and this diaphragm type filler cap. Now as we mentioned, this master cylinder is designed for use only on disc brakes, and that's because disc brakes do require a maximum pressure rating of 1,500 to 1,600 psi. So the orifice opening that's on the inside of this master cylinder assembly.
It is larger than it's used on drum brakes. Drum brake actuators will require a maximum pressure rating of only 1,000 psi. So the master cylinder is designed for drum brakes will have a smaller orifice connector opening. This one we mentioned is for disc brakes. If you do need the one for drum brakes, we also sell that one separately on our website.
It's part number T1777401. And when you look at it looks just like this one except on the inside, it has the smaller orifice opening for the drum brakes. Now, we mentioned the mounting bracket is included but the mounting hardware's not included. You can use your existing hardware if you already have it, but if you do need new hardware, we do sell that separately on our website. Does use the self-tapping hex bolt size 5/16 standard by half inch long.
They are part number T1781500. And they are listed on this product page as a related product. Also, to connect to your brake line to this master cylinder. It will require an orifice connector that'll connect this 1/8 inch diameter thread here on the master cylinder to your 3/16 brake line fitting on your trailer. That connector we sell separately as part number T1209800.
And again, it is listed on this product page as a related product. But that's gonna do it for the review on this replacement master cylinder assembly for the Dexter Model 6 Disc Brake Actuators.
Ratings & Reviews

Donald C.
8/18/2021
Sold the boat and trailer last year but until then the unit worked as designed.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Josh V.
9/20/2019
So far so good. No more leaks and works as intended after I was able to properly bleed the brakes.