Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.
These marine slides from Caliber mount directly over your existing carpeted bunks, so you won't have to strip off the old, shaggy carpet, remove staples, replace your bunk boards, or prep the wood underneath. And you don't need special tools to get these marine slides in place. Just grab your drill and you'll have them installed in minutes with the included stainless steel screws.
If you're tired of cranking your boat off sticky bunks, you'll like these slides. They create a smooth, low-drag surface that helps your boat glide off and onto your trailer with less effort. Because you're not cranking your winch so hard, it's easier on your body and your boat's equipment.
If you like the traditional look of carpeting over your bunks, but don't want the hassle of replacing your carpet when it starts looking ragged, these slides will preserve the look and feel of carpeted bunks while giving you functionality and protection where the most friction happens. These glides are made from high-impact plastic, and won't fray, fade, or break down. They also won't trap sand, mud, weeds, or transport invasive species. It's a cleaner, lower-maintenance option made to hold up through repeated launching and loading.
These slides aren't just for bunk trailers. They're also a smart upgrade for boat lifts, workstations, or watercraft dollies - anywhere you're dealing with sticky bunks or hard-to-move equipment. If you've ever struggled with drag when shifting your boat or personal watercraft, these slick surfaces can help things glide more easily and reduce wear on your gear.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, neighbor, Steven here with etrailer.com. Let's take a look at our Caliber Marine Slides for your boat trailer bunks. And these are gonna be a three-inch wide black. Now, folks, you're gonna get 10 of these and these are gonna upgrade your bunks without the hassle of removing your carpet. So it's gonna save you some time. So again, no removal of that carpet required.
You simply mount these over the top of your carpeted bunks and it's gonna be great on workstations, lifts, boats and all watercraft dollies maybe. Now, what this does is it's gonna divert water and grit away from your boat's hole. It's also gonna give your boat something slick to slide onto. So this is, like, a plastic mix with some kind of lubricant construction, which makes it easy to slide on or off. It's gonna reduce strain on the ropes, the winch, the bow, your eyes, and your arms honestly.
So, and what you could do is, these, again, are made of that heavy duty plastic with lubricant mix. And as you can see, the water, like I mentioned, is gonna come out of those grooves and slide easily. Installs easy, use the included screws. Make sure everything's flush. You can cut them shorter if you need to.
Let's say you get to the end of your bunk and you need to whack off so much, you can do that, just use some kind of, I don't know, like a cutoff wheel or something and do it safe. Now, these are made to last. They are gonna resist damage from sun and salt water. And again, they install with these screws that are included. You can mount these either horizontal or you can mount them rather to horizontal or vertical bunks.
Now, these are 3 inches wide by 15 inches long. There's a view of the back, and we also offer these in two different colors as well. We have 'em in white sold separately and yellow sold separately. And one more thing is you could technically combine these with the Caliber Slides On, which will further reduce friction, prevent scratches or scuffs on your hole. And that Slides On is sold separately as well. We got that in many different sizes and colors. And what that Slides On is, is a wrap for those bunks instead of carpet, which is pretty neat. So check that out as well. Well, folks, again, I'm Steven. Thanks so much for taking a look with me today at the Caliber Marine Slides in Black. Have a good one.
Worked well
Quick service!
Exactly what I ordered everything was as advertised and I got it in a timely manner will definitely do business again..
Great parts and even better service
1000 times better than carpet for a jon boat.
Awesome company will do business again. William is a great guy! Very helpful.
I probably won't be putting them on the trailer until next spring.I live in vermont and putting the boat up for the winter, but so far they look good.And I think it'll work when I do it.I'll get back to you
My boat glides on & off the trailer. Outstanding product. I liked that I didn’t need to buy anything else for installation
Easy to install on my Jet Ski trailer. Should make it really easy to slide the ski on and off.
Trailer does double duty. These were for my bobcat pirogue. Large for jonboat.
Quality stuff
Excellent product as described
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.