Product Experts Available Now!
Call 1-800-940-8924
CE Smith Tie-Down Bracket for Boat Trailers - Galvanized Steel - Bolt On - Qty 1
(231 reviews)
Price: $10.32
In Stock
CE Smith
CE Smith Tie-Down Bracket for Boat Trailers - Galvanized Steel - Bolt On - Qty 1
Part Number: CE26214G
In Stock
$10.32
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (231)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE26214G
- Tie-Downs
- Tie-Down Bracket
- 4 Inch Long
- Galvanized Steel
- CE Smith
Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant galvanized steel.
Features:
- Creates a fixed-position tie-down on your trailer
- Bolts to trailer's frame, wall or floor
- Mounting hardware not included
- 30-Degree mounting angle accommodates most tie-down applications
- Constructed of galvanized steel - long-lasting and corrosion resistant
- Made in the USA
Specs:
- Quantity: 1 bracket
- Length: 4"
- Width: 1-15/16"
- Small bolt hole diameter: 1/2"
- Large bolt hole diameter: 7/8"
The 30-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
26214G Galvanized Steel Tie Down Bracket by CE Smith
Ratings & Reviews
4.8
231 reviews
by:
Brian
02/16/2026
Tie downs fit perfect for the transom straps…. First time trying the guide posts and I love them. Easy to install on trailer and will work perfectly.
One minor change is the large zip ties that come with the covers are a bit cumbersome and difficult to work with….I just replaced with regular zip ties and tightened them to my liking and it looks great….. being a hunter I absolutely love these. Definitely will keep etrailer for any future purchases. Get customer service and fast shipping
Thanks
Brian
Melbourne Florida
One minor change is the large zip ties that come with the covers are a bit cumbersome and difficult to work with….I just replaced with regular zip ties and tightened them to my liking and it looks great….. being a hunter I absolutely love these. Definitely will keep etrailer for any future purchases. Get customer service and fast shipping
Thanks
Brian
Melbourne Florida
by:
Chris
09/24/2026
I now have tie downs on my boat trailer
by:
Leon D’Vynl
07/10/2026
Great. Exactly what I needed for my trailer. Will/would buy again.
by:
Daniel
09/22/2026
Exactly what I was looking for.
by:
Philip
07/08/2026
Worked as described…make sure to inspect the galvinized finish and return before the window closes.
by:
Glenn
02/12/2025
Fold of the metal was inconsistent between the two individual pieces.
Was able to to bend with no issues- great products and service!
Was able to to bend with no issues- great products and service!
Glenn
2/14/2026
No problems. Worked as I had hoped.
by:
Mike B
03/27/2019
Perfect for tying down your boat or in my case, a jet ski. Super easy to install. I now have a place to hook my straps to.
by:
Anthony
07/30/2025
Great replacement for my old rusted out ones that where actually on the trailer light brackets. These bolted right up to the frame for a much more sturdier install.
by:
Robert / The Winnie
03/27/2026
Excelleny quaility as expected but what was a surprise and quite unexpected was the like-overnight delivery.
Purchase with total confidence. Thank you so much.
Purchase with total confidence. Thank you so much.
by:
Robert
07/28/2022
This is going to replace the eyebolts that are currently screwed into the carpet/wood bunks. The eye bolts, that were on the trailer when I purchased the boat, are all rusted now from the saltwater and I no longer trust them to securely hold the boat transom to the trailer. Since the small holes on the tie-down brackets are 1/2", I'm going to install them at the bunk supports (which are also 1/2" U-bolts). Only have to un-bolt the rear side of each U-bolt and add the tie-down bracket and re-bolt the bunk support.
Robert
7/29/2023
Still going strong and looking good after a years worth of saltwater ramp activity. The old eye bolts actually broke apart when i extracted them. What a simple, inexpensive solution these C E Smith tie-downs turned out to be.
by:
Anthony
09/17/2025
A really substantial piece that is heavily galvanized. It should hold up very well to the saltwater environment.
by:
Bob H
08/09/2013
These hold down brackets are well made with no sharp edges, and heavily galvanized. For some reason my boat trailer came without a bracket to tie down the boat transom to the trailer, these should do the job nicely.
Bob H.
2/7/2015
No problems then or now, should outlast the trailer.
by:
David
09/17/2025
Identical To what is currently on my boat trailer.
by:
Joseph
07/18/2025
Great product exactly what I need to attach a strap over to center of the boat to on either side.
by:
James
06/01/2019
Perfect anchor point for tying down your boat or anything else. Use the proper length 1/2 inch bolt and it is very strong. Just the right angle to get a tie down hook in it. Very happy with this item.
James T.
6/2/2020
Still looking like new, no rust. Very strong.
by:
Frank Venturella
05/03/2019
6 wks. ago I started on a refurbishing project off a 1988 Holsclaw boat trailer. I stripped all the paint off, ground and sanded the rust, primed and painted everything, replaced ALL the fasteners with stainless stell and some galvanized. I ordered several things from etrailer.com . Everything I ordered was to exact specifications and the shipping was on-time, everytime. I ordered several bearing items to repack the hubs, this coupler and nifty lifting handle, transom tie down brackets, spare tire carrier and 3 new 570x80 tires mounted on galvanized rims and the company installed stems, free of charge! I love the way this project came out and I've thoroughly enjoyed shopping @ etrailer.com! Thank you!
by:
Bill G
03/05/2018
Really heavy bracket. Will be used for a bow tie down point on a boat trailer. Price was less than 1/2 of that wanted at local marine shops.
Bill G.
3/5/2019
Its been a great addition to my trailer and continues to work exactly as planned.
by:
Jeff
04/14/2015
Exactly as described. Used a T-Nut on the top of the bunk with a bolt through the tie down bracket up through the bottom of the bunk.
Jeff
4/21/2016
Still working great.
by:
Paul
05/31/2019
I needed to modify my tie down points on my boat trailer to allow the straps to clear the trim tabs. These brackets were perfect for my application and worked out great. The prices and availability at retailer are what keeps me purchasing from them.
by:
Scott
05/31/2023
One of two parts has the galvanizing flaking off. Wasn't planning on prime and paint but now I have to.
by:
Russell
06/18/2014
I have a 25' center console with twin 150 outboards on jackplates. When I added trim tabs, it left a very narrow opening for a tie-down strap for the stern, and there was nothing on the trailer in that spot.
My boat is about 6,000 lbs, and I used 2 of the brackets for each side (4 total) with Grade 8 bolts and washers.
It was easy to install, well made, and well priced.
My boat is about 6,000 lbs, and I used 2 of the brackets for each side (4 total) with Grade 8 bolts and washers.
It was easy to install, well made, and well priced.
by:
Aimcastoutdoors
05/19/2025
Heavy Duty, works good
by:
Morgan
07/12/2022
The part arrived promptly and was exactly what I ordered. I was able to install it quickly and now my cross-boat transom strap holds tight.
Morgan
7/13/2023
This item is still going strong a year after I installed it. It looks just like the day I installed it on the trailer. Very happy with the purchase.
by:
Robert
06/17/2021
Expensive, but very well built, larger than I expected, galvanized, and better than anything I could build on my own. When you consider the time to go to the store, buy material, and make it yourself, this is a bargain.
Robert S.
6/20/2022
Great! Best purchase for my tie downs
by:
Joe Q
05/23/2014
Every time I need something for one of my trailers, I know I can find it on etrailer.com. On top of that, the ordering process is the easiest on the web, but shipping is fast, prices are great and the quality is tops.
The items arrive faster than I could find the item locally and etrailer.com saves me both time and gas.
ETRAILER is the best place online to order parts from!!
The items arrive faster than I could find the item locally and etrailer.com saves me both time and gas.
ETRAILER is the best place online to order parts from!!
25
231
true
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Recommended Bolt-On Tie Down Bracket for a Pontoon Boat TrailerYes we do, Johnny. Check out the CE Smith Tie-Down Bracket for Boat Trailers # CE26214G. This is a bolt-on bracket that will create a fixed-position tie-down on your trailer, is made of galvanized steel, and is 4" long x 1 15/16" wide.
view full answer... - Do You Have Trailer Safety Chain With a Hot Dipped Galvanized CoatingHey, John. We do not carry any safety chains that are galvanized. If you're looking for some chains that wont rust from being around water we do have some that are zinc coded. Buyers Products 3/8" x 42" trailer safety chain with clevis hook part # 337BSC3842 Buyers Products 3/8" x 35" trailer safety chain with clevis hook part # 337B03835SC Buyers Products 3/8" x 22" trailer safety chain with clevis hook part # 337B03822SC Are you needing the chains for a boat trailer?
view full answer... - Adding Safety Chain Mounts To Pole Tongue Trailer After Installing Swing Away HingeI have some options for you as the CE Smith Tie-Down Bracket # CE26214G is not rated for attaching Safety Chain # 337BSC3842. Typically safety chains are attached through a Clip # 337SC58B as they should not be easily removable from a trailer. We do also have the Buyers Products Weld-On Safety Chain Retainer # 3375471001 which can allow you to add chains. If you prefer to have a bolt on chain like the Safety Chain # 8880262 you will need to ensure where you are drilling is strong enough...
view full answer... - Can a Transom Tie Down Be Mounted To The Bunk Boards On A Boat Trailer? The CE Smith Tie-Down Bracket # CE26214G really should not be attached to the end of the bunk board. The end of the board will rot over time as it is constantly being submerged in water for loading and unloading the boat. The bracket should be attached to the crossmember or the trailer frame. You will then be able to secure your boat to the trailer using the Transom Tie-Down Straps # IMF14207.
view full answer... - Grade Bolt to Use When Installing CE Smith Tie-Down Bracket # CE26214GA Grade 5 bolt or higher would be recommended for use with the CE Smith Tie-Down Bracket # CE26214G.
view full answer... - Pull Rating for the CE Smith Tie-Down Bracket for Trailers # CE26214GI spoke with my contact at CE Smith and unfortunately they do not have a pull rating for the tie-down bracket # CE26214G. However, he did say that because the brackets are 7 gauge steel, 2 inches wide you should have no problems securely tying down a full-sized ATV to your trailer. I have included a link to a video showing the dimensions of the brackets. A second option would be the Brophy Utility Trailer D-Ring Tie Down # LRB1 which has a 1/2" ring diameter and measures 2-1/2" x 2-3/8"...
view full answer... - Which Hole of the CE Smith Tie-Down Bracket # CE26214G Mounts to the TrailerThe smaller hole of the CE Smith Tie-Down Bracket # CE26214G is the mounting hole that secures the bracket to the trailer. The smaller hole is 9/16 of an inch and the larger hole is 7/8 of an inch. The bracket has a 30 degree angle to it. I apologize for the confusion.
view full answer... - Dimensions of the CE Smith Tie-Down Bracket for Boat Trailers # CE26214GI went and pulled a CE Smith Tie-Down Bracket # CE26214G from our warehouse to measure the dimensions and found that the overall length is 4 inches, the width is 1-15/16 inches, the bigger hole is 7/8 of an inch and the smaller hole is 9/16 of an inch. Check out the video I attached that shows me taking these measurements.
view full answer... - Dimensions of the CE Smith Tie-Down Bracket Clearance Holes for Boat Trailers # CE26214GThe clearance holes on the CE Smith Tie-Down Bracket, # CE26214G, are 7/8 inch for the larger hole and 9/16 inch for the smaller hole. I am attaching a link to a previous question that was answered by one of our experts. It includes a video showing the measurements being made which may be of help to you.
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Expert Research:
Jameson C
Video by:
Joshua S
Written by:
David L
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Jenny M
Installed by:
Cole B
Installed by:
Ryan G
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
2/18/2026
Thank you Brian, I'm happy we could help!