See what our Experts say about this Yakima Accessories and Parts

• Dimensions of Yakima Anchor Plate A Part # Y8810074 and 60-Inch Track for Roof Racks
  The Yakima Replacement Anchor Plate Style-A, Part # Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima 60-inch Track for Roof Racks, part # Y01135, is a set of two tracks with included hardware. I have indicated below the various measurements of the T-shaped channel within the track. The opening at the top of the track measures 0.45 inches...
  view full answer...
  
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• Recommended Roof Rack Replacement System for a 2014 Toyota FJ Cruiser
  It looks like the picture came through, Jessica. From what I can see, it looks like the issue is with the OEM rails, which we aren't going to be able to fix. No matter which set of crossbars you choose, you're still going to have a pretty tall setup because the OEM rails are pretty tall. What you could do, is use a track system # RTC16 which would require you to remove your OEM bars. From here you'd need to add the landing pad # Y00221, towers # Y53TR, and bars # Y00425. This would...
  view full answer...
• Crossbars That Will Fit Both A 2023 Chevy Tahoe And An ARE Camper Shell
  Hello Dusty, thanks for reaching out. I do have a solution for you, but Rhino Rack currently does not offer a roof rack fit for a 2023 Chevy Tahoe. Yakima, on the other hand, does offer a fit for both your Tahoe and your ARE camper shell. You can use their 60" JetStream Aero Bars for both. Here is what you will need for your Tahoe: - Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2 # Y89KB Then here is what you will need for the ARE shell: -...
  view full answer...
• Can Yakima SkyLine Towers Be Used On 2015 Ram 2500 Mega Cab?
  Hello Phil, thanks for reaching out. Sadly, Yakima does not offer a fit for the Skyline towers on a 2015 Ram 2500 Mega Cab. So a roof rack can be added, but not using the landing pad 27 or the Skyline towers. Instead you will need to use the Baseline towers and base clip kit. You may be able to re use your JetStream bars. How long are they? Yakima recommends a 60" so as long as your bars are 60" or longer they can be used. Here are the rest of the parts you will need: - BaseLine Towers...
  view full answer...
• Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks
  Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
  view full answer...
• Install Instructions for Yakima 60 inch Tracks for Roof Racks
  We do have the part # Y8810155 and it is in stock. I also attached pictures of the install instructions for the tracks part # Y01135 as well.
  view full answer...
  
• Ladder Rack for a Leer Camper Shell on a 2007 Toyota Tundra
  We do have a camper shell ladder rack you can use with your Leer camper shell on your 2007 Toyota Tundra. take a look at the Thule TracRac CapRac # TH29200XT. This rack includes everything so it is ready to install. The load stops are also included. The bars are 65 inches long and the capacity is limited to the capacity of your Leer camper shell. If you would rather have a rack that is adjustable front to back then you can use Rhino-Rack roof rack # Y01-120-NTB with 54 inch long bars but...
  view full answer...
  
• T-Bolts that Fit Yakima Roof Channels on Camper
  Yakima has the T-bolt kit part # Y8880184 which includes a quantity of 4 T-bolts that are designed to fit in the tracks of their roof channels like what you have. These come with lock nuts as well.
  view full answer...
• What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
  If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. For the tracks themselves, they come in 3 different sizes: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima 54" Tracks for Roof Racks # Y26RR - Yakima 60" Tracks for Roof Racks # Y01135 Since most truck...
  view full answer...
• Can the Yakima 60 Track System Be Installed On Naked Roof Vehicles?
  You can use either the Yakima 54" tracks # Y01127 or 60" tracks # Y01135 on naked roofs without needing to remove the headliner, and as long as you're careful, you won't damage the headliner during installation. It should be noted that the 60" tracks are usually too long for most vehicles with naked roofs, which is why the title is so vague. The Yakima 54" kit comes with the PlusNut Hardware but to install the 60" tracks on a naked roof you would need to purchase a PlusNut Hardware kit...
  view full answer...
• Will Thule UpRide Bike Rack Fit T-Slot of Rhino-Rack Vortex Crossbars for Track Mount System
  Yes, the Thule UpRide # TH599000 will fit the T-Slot channels of the Rhino-Rack Vortex crossbars. The Rhino-Rack tracks don't have extra end caps available but I do have another solution for you. I confirmed this with my contact at Rhino-Rack. The Yakima tracks, similar to the Rhino-Rack tracks, do have replacement end caps that will allow you to easily do what you are wanting to do. The Yakima tracks come in 3 different lengths; 42" # Y01126, 54" # Y01127, and 60" # Y01135. You will just...
  view full answer...
  
• What Is The Narrowest Roof Track?
  Hi David, I checked the 5 styles of tracks we carry and it looks like the Rhino Rack options will be the most narrow at 1-1/2". In case you were curious about the other style (and brands), I have all my findings listed below. 1-1/2" wide - Rhino-Rack RT-Style Roof Rack Tracks - 66" Long # RRRTV168 1-5/8" wide - Thule Top Tracks for Roof Racks - 60" Long # THTB60 2" wide - Yakima 60" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD # Y74MR 1-5/8" wide - Yakima 60" Tracks for Roof...
  view full answer...
• Can the Yakima 60 inch Track System use PlusNut Hardware Instead of Capnuts
  Yes, the Replacement PlusNut Hardware Kit # Y8880039 that you referenced is an optional hardware kit for your Yakima 60" Tracks for Roof Racks # Y01135. This hardware kit is designed for use with sheet metal roof applications.
  view full answer...
• Replacement Hardware for Yakima 60" Roof Rack Tracks
  The Replacement PlusNut Hardware for Yakima Roof Rack Tracks # Y8810102 works only to replace the original PlusNut and washer on Yakima 42" # Y01126 or 54" # Y01127. For the complete hardware kit see Replacement PlusNut Hardware Kit # Y8880039. For your Yakima 60" Roof Rack Tracks # Y01135 you need replacement kit # Y8810155 since we don't sell individual parts for this kit separately. This kit includes 12 capnuts, 12 bolts, 9 black nylon washers and 13 white nylon washers.
  view full answer...
• How To Install Yakima LockNLoad Over Truck Bed with Tonneau Cover
  In order to install the Yakima LockNLoad Platform Roof Tray above a tonneau cover on a truck bed you will need to install a set of tracks alongside the bed rails along with a crossbar system. The crossbar system is needed because the tray is not wide enough to reach just the mounting feet on the tracks. I have attached the needed parts below: Yakima JetStream Crossbars part # Y00427 Yakima Tracks for Roof Racks part # Y01135 Landing Pad Yakima Control Towers part # Y00221 (2) SkyLine Towers...
  view full answer...
• How Many Bolts are Needed When Installing the Yakima 60" Tracks for Roof Racks # Y01135
  If the instructions for the Yakima 60" Tracks for Roof Racks # Y01135 state to use the mounting bolts on every other hole then the 12 mounting bolts included in part # Y8810155 is enough for 2 tracks. Although you can cut them to size, if you use the full 60" of the track then you will need to drill 6 holes. I went out to the warehouse and found the cap nuts to have a 1-1/8" diameter.
  view full answer...
• Can Yakima Tracks Work on Truck Cap and Roof
  You can add the Yakima Tracks for Roof Racks, which come in 60" # Y01135, 54" # Y01127 or 42" # Y01126 to your 2015 Ford F-150 although I could not tell from the photo if there was a space between the truck cap and the roof of your truck. If there is a space between them you wouldn't want to install just the two tracks per side as that wouldn't be fully secure. As for the rivets showing, they won't specifically, but the CapNuts in the hardware would show because you need to drill through...
  view full answer...
  
• Can the Yakima Tracks for Roof Racks Be Trimmed Down and Still Have the End Caps Used?
  Yes. You can cut the Yakima 60" Tracks for Roof Racks # Y01135 down to the size you need them and still use the end caps. You'll need to either cut them down to a size that still leaves the pre-drilled holes close enough to connect the end caps with the screws (as designed) OR you can drill new holes to connect the end caps on your own spacing needs. I've linked a photo to show you how exactly the end caps will attach to the end of your tracks.
  view full answer...