Custom Fit Roof Rack Kit With Y00248 | Y00425 | Y53TR
Item # Y27TB
Our Price: $688.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
- All Info
- Reviews (243)
- Q & A (0)
- Videos (103)
- Photos
Yakima Roof Rack - Y27TB
- Aero Bars
- Crossbars
- 50 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 50" JetStream SM - Black:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 22 (Set of 4):
- Provide mounting points for Yakima SkyLine or Control towers
- Pads install in your vehicle's fixed mounting points
- Protect your vehicle from scratches with UV-resistant, rubber base pads
- Include snap-on covers for protection when towers are not in place
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000248 Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00248 | Y00425 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Custom Fit Roof Rack Kit With Y00248 | Y00425 | Y53TR - Y27TB
Average Customer Rating: 4.8 out of 5 stars (243 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
by: John11/16/2023
Mazda
Great quality! They come with two different style bases. One flat, and one that is stepped to account for the raised area near the gutter trim. Good variety of screws to meet your application. My 2015 Mazda 3 (with fixed points) needed the medium length screws. Seems very solid!
I left the plastic gutter moldings on and just drilled holes for the screws to go through.
by: John11/16/2023
Mazda
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: Dave05/06/2024
Everything came in a timely manner and ready to install. Looks great, solid rack.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze.
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Kevin 09/14/2023
Parts arrived quickly. Installation was a breeze. Everything needed for a quick and professional installation was included in the shipment.
by: Aidan08/19/2023
2012 Toyota Prius
Great bars and easy installation on my 2012 Prius C
by: Michael P.01/22/2023
Mercedes-Benz
Yakima Landing Pad 22 is the only product I could find that is suitable for my Mercedes E450 Coupe. The car's panoramic glass extends close to where the fixed mounting points are, but Yakima has accounted for that by designing the LP 22 so that the small part that sits on the glass is not transferring the load. Also, the LP22 accommodates the flip-open doors for the four fixed mounting points on the Mercedes. Yakima instruction manual and etrailer.com videos are highly useful.
Only complaint is with the LP 22 Covers, which are supplied for when the roof rack (Towers and Crossbars) are removed. These covers are not usable - they do not snap into place and appear as if they were designed for a different landing pad. This is not a deal breaker for me because I remove the LP 22s whenever I remove the roof rack, but it will likely be a concern for others.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
by: Kevin 11/14/2023
not installed yet but everything was delivered on time and in good condition
by: Dan 11/06/2023
Great company. Fast delivery.
by: Steven 10/16/2023
Great product. Great service.
by: Porfirio10/26/2023
very informative and great work
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
by: Ernesto07/23/2022
Nissan Rogue
Well you asked for it so;
I ordered this as part of my roof rack for a 2021 Nissan rogue. The complete roof rack set was unavailable le as one bracket was on back order and said would ship in under a month so I ordered everything else in the meantime. Little did I know it would take a over a year to get one stupid bracket and yes, I'm still waiting. I can't even return the items I bought because it's way past the 90 day policy even though they're brand new still in the box collecting dust. etrailer, this has been the worst experience I've had yet with you guys. Oh still waiting for my one bracket to complete my roof rack
by: Roger03/24/2020
robert s was terrific !!! excellent customer service !!! from assisting with a return, to recommending an alternative, to informing me about delivery status ...
the yakima jetstream crossbars with baseline towers were a bit more complicated to assemble and install than the brand i returned, but the wind noise and whistling are dramatically less ...
the next step is to select a cargo carrier ... it goes without saying that i will consult robert again ... thanks so much robert, and safe and happy travels to all
by: JB02/13/2022
The rack system seems very good, but time will tell, of course. The installation is difficult and time consuming. I purchased the system needed from etrailer website with guaranteed to fit pieces. I would call myself a very experienced do-it-yourselfer. I followed directions slowly, carefully, and exactly, yet there were problems. The video for installation given for my exact order did not match the printed and actual assembly and installation directions. The baseclips that were guaranteed for my model vehicle were actually for a different model vehicle according to the enclosed sheet ... however they did work anyway but caused some "looking up" and some confusion during assembly. I was careful to assemble exactly to measurements given ... and once that is all done and tightened and "sealed up" you put them on the roof, only to find that they could have been spaced a bit wider for a perfect fit. They are fine enough and we'll see if they stay tight to the vehicle. If not will need to take it all apart and widen the spacing.
It is excellent that basically only one tool that is provided with the racks is needed. And also that each part must "click" when properly tightened. That adds reassurance and satisfaction while assembling.
There are so many models of vehicles and it is not easy to figure all this out. etrailer has a very helpful website, response, and videos to help ... but my review is to emphasize that the instructions are not perfect. One needs lots of patience, common sense, and perhaps re-assembly for a perfect outcome.
25
454
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- How to Fit Yakima Show Down Kayak Carrier on 2014 Subaru Outback with Factory Roof RackThe Yakima ShowDown kayak carrier part # Y04081 can fit your 2014 Subaru Outback Wagon but would require an aftermarket roof rack as it won't fit the factory bars. So for that Yakima recommends the Jetstream bar roof rack # Y00425 and # Y33TR which is a high quality and aerodynamic roof rack confirmed as a fit for your vehicle.
view full answer... - Best Looking Roof Rack for 2013 Lexus ES 350 With Wind DeflectorThe best-looking roof rack for your 2013 Lexus ES 350 is from Yakima and you can choose the color of crossbars you want, either black or silver. The rack consists of the following parts but please be aware there are no roof racks that fit your Lexus if it has a glass roof: - Yakima JetStream Crossbars # Y00425 (Black) - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06175 - BaseClip Fit Kit # Y06160 And for a wind fairing a good fit for this rack on your Lexus is...
view full answer... - Recommendation For Roof Rack For 2018 Ford Edge With MoonroofYes. For the 2018 Ford Edge with Moonroof and flush mounted rails running from front to back, I recommend the Thule WingBar Roof Rack. It has a stylish and very aerodynamic design that makes it very durable and very quiet. The parts needed for this rack are: 53 inch WingBars, Item # TH711400 in silver or # TH711420 in black, Evo clamp feet # TH710501, and Fit Kit # TH145074. Additionally I recommend the Thule One Key locking system, Item # TH450400, sold separately. If your 2018...
view full answer... - Will Old Thule Square Crossbars Work on a 2019 Mercedes-Benz A-ClassI do have some roof rack options for a 2019 Mercedes-Benz A-Class but there are none from Thule currently. Furthermore, the old Thule square bars are discontinued so there is no way to reuse them on another vehicle. Instead, I recommend the Yakima JetStream Crossbar System composed of part # Y00425, part # Y28TR, and part # Y06146. This is an aero bar system which will provide the least wind noise and is compatible with the most amount of rooftop mounted accessories.
view full answer... - Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
view full answer... - Replacement Roof Rack For 2004 Toyota Matrix Which Has Obsolete Whispbar Cross BarsI can only recommend a replacement roof rack since Whispbar was discontinued in the fall of 2016. I recommend replacing your rack with the Yakima aero roof rack. You will need their JetStream Crossbars # Y00425 along with the Towers # Y28TR and Fit Kits # Y06139, # Y06178.
view full answer... - Will Yakima OffGrid Cargo Basket Fit on 2018 Toyota Tacoma Roof?Absolutely! The Yakima OffGrid Cargo Basket # Y07138 is 44" long by 40" wide. From my experience with the Tacoma and some research, the roof size is about 60" long and 52" wide on the double cab. The usual aftermarket roof rack crossbars for the 2018 Toyota Tacoma like # Y00425 are 50" long. This means the Yakima OffGrid will definitely fit on your roof. I attached my video review and install of this rack on a 2020 Toyota Tacoma. It's also a double cab which is an extra point for you since...
view full answer... - Yakima Roof Rack Fit on 2017 Toyota Yaris iAWe do have all of the parts for a Yakima roof rack that fits a 2017 Toyota Yaris iA with a naked roof. It will consist of the following components: - Yakima JetStream Crossbars # Y00425 (Black) - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06123 - BaseClip Fit Kit # Y06159 - Same Key System Lock Cores (Optional) # Y07204 This will give your '17 Yaris iA a very quiet and strong rack so you can carry whatever gear you need. I've added links to instructions and video...
view full answer... - Will Yakima Roof Rack and Yakima SkyBox 21 Fit a 2018 Mercedes-Benz GLC300 with Flush RailsI'm not sure what Thule products you already have but there are roof rack options from Thule, as well as Yakima, that are compatible with your 2018 Mercedes-Benz GLC300 with the flush mounted rails. The Thule roof rack option includes the 47" WingBar Evo Bars # TH711220 Black or # TH711200 Silver, the Foot Pack # TH710601, and the Fit Kit # TH186020. The Yakima roof rack options include the 50" JetStream Bars # Y00425 Black, along with the RidgeLine Towers # Y00145 and Fit Kit # Y06022. When...
view full answer...
- Can Thule WingBar Evo Crossbar Fit On Yakima SkyLine TowersThe Replacement Adapter and Seat # 8880637 is designed for Yakima JetStream bars but we do have a review showing them being used with Thule WingBars so it does look like they will physically fit together. With that being said, I recommend sticking with Yakima products just because if you do happen to experience any faults with the system (which there shouldn't be any) it would be a lot easier to work with Yakima or Thule if you can show that you're using the product as intended and you...
view full answer...
- Determining if 2006 Mazda 3 Grand Touring Features Fixed Mounting Points for Roof RackI am not sure if your 2006 Mazda 3 Grand Touring S features the fixed mounting points on the roof. I recommend taking a look at the roof of your vehicle to see if you can locate four black rubber gutters. The fixed points, if present, will be located beneath the gutters and will essentially be a series of threads in which to mount bases for a roof rack system. There are variety of potential options available for a roof rack on your Mazda 3 Grand Touring, which will be dependent on not...
view full answer... - Best Way to Carry Cargo on the Roof of a 2005 Scion tCThe best option would be a cargo box installed on an aftermarket roof rack on your 2005 Scion tC. For a cargo box I would recommend the SportRack Vista XL Cargo Box part # SR7018. For a more economical option you could go with a Rightline Sport Jr. Rooftop Cargo Bag # RL100S50, this bag does not require the installation of a roof rack. I also recommend a protective pad, # RL100650, to protect the roof when using the bag. This would be great if you only occasionally plan to carry cargo...
view full answer... - Yakima Jetstream Roof Rack for 2019 Jeep Grand Cherokee with E-group PackageThe Yakima Jetstream roof rack made of parts # Y00425, # Y53TR and # Y00244 is a correct fit on your Grand Cherokee's E-Group roof configuration that has black and chrome tracks that are flush mounted and run front to back. Lock core kit # Y07204 is a correct selection and a worthwhile addition too for security. An install video is included for you. You do need to order each of these item numbers; we do not have one part for all. This rack features aerodynamic 50-inch crossbars that will...
view full answer...
- Do Yakima TimberLine Towers Come With Hardware for JetStream CrossbarsThe TimberLine Towers for Yakima Crossbars # Y33TR that fit your 2013 Subaru XV Crosstrek do not come with any hardware, just a torque wrench. If you are looking to attach JetStream crossbars such as the 50" # Y00425 Black to TimberLine Towers, the crossbars have "seats" that will allow you to attach them (see accompanying cut out of the instructions). If you do not have these seats there are replacements available, the Replacement Adapter and Seat for Yakima JetStream Crossbars # 8880637.
view full answer...
- Will the Thule AeroBlade Edge Crossbars Fit My 2019 Lexus GX 460 with Flush Rails?I have a great alternative for you. Unfortunately, the Thule AeroBlade Edge Crossbars will not fit your flush rails of your 2019 GX 460. However, if you are looking for a roof rack system that sits higher, I recommend the following roof rack setup: - Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 - SkyLine Towers # Y00148 - Landing Pad 30 # Y25ZR - Yakima Same-Key Lock Cores # Y07204 This roof rack system sits about 4 inches from the top of your roof of your...
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer...
- Scion tc Cargo Basket and Cargo Bag Recommendation for Yakima Roof RackThe crossbar spread of the Yakima roof rack you have on your 2006 Scioin tC will be 21 inches that consists of part numbers # Y00425, # Y28TR, # Y06134, and # Y06136. If you wanted to use the cargo bag part # RL100S50 that you referenced you would first need a cargo basket. For one confirmed to fit your crossbar spread you would want the Curt Cargo Basket part # C18115. Check out the review video I attached for more info.
view full answer... - What is the Best Roof Rack for a 2024 Subaru Outback Wagon w/out the Wilderness Rails?The best roof rack for a 2024 Subaru Outback Wagon without the Wilderness rails is the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 item # Y46VR
view full answer... - How to Obtain Larger Crossbar Spread On a 2014 Subaru Outback WagonThe Yakima JetStream Crossbar System part # Y00425, part # Y53TR, part # Y00239 would be a great option for a 2014 Subaru Outback Wagon. It will provide you with a 30" crossbar spread which will be the most that's available. Unfortunately, you won't be able to move any attachment points for the systems outside of what is recommended as these points are chosen based on the strong points of the roof. The systems that attach to the raised side rails all have a 20-21" spread.
view full answer... - Recommended Roof Rack for a 2022 Ford Escape With Factory RailsThe roof rack that I recommend for your 2022 Ford Escape with Factory rails is the 2022 Ford Escape Roof Rack by Yakima which consists of: - Yakima JetStream Crossbars # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - SightClip Fit Kit for Yakima SightLine Roof Rack Towers # Y36AR This would provide you with a roof rack that fits your 2022 Ford Escape and would allow you to use both clamp-on and channel mounted accessories. It has a weight capacity of 165 lbs. and an aerodynamic...
view full answer... - Availability Of Trailer Hitch For 2023 Kia Soul GT-Line With Center ExhaustIf you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (July 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece and...
view full answer... - Recommended Crossbar System For A Camper Shell On A 2013 Toyota Tacoma Double CabFor your 2013 Toyota Tacoma Double Cab with a camper shell, I recommend checking out the: -Yakima JetStream Crossbars # Y00425, with the SkyLine Towers for Yakima Crossbars # Y53TR, and the Landing Pad 24 for Yakima SkyLine and Control Towers # Y74FR. These crossbars measures 50" long x 3-1/8" wide x 1" tall, is designed to be mounted to naked roofs like what's on your LEER camper shell, and has a maximum weight capacity of 165-lbs. Attached is a product review video for you to check...
view full answer... - Quietest Roof Rack Available for 2023 Kia SorentoFor the quietest roof rack for your 2023 Kia Sorento you need the Yakima JetStream roof rack system. This roof rack consists of the following parts: -Yakima JetStream Crossbars # Y00425 -TimberLine Towers for Yakima Crossbars # Y33TR These low-profile crossbars are extremely quiet due to their aerodynamic shape. It features an aluminum construction with a black powder coat finish and a 165 lb capacity. If you want to add locks for added security you can use the # Y07204.
view full answer... - Roof Rack Recommendation for 2018 Honda CR-V for Best Wind ResistanceSince wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers # Y00425, # Y28TR, # Y06188, and # Y06189 would be the winner as it has the highest capacity of 165 lbs, has aero shaped bars, and has the shortest bars which also helps with wind noise. These bars are 50 inches in length.
view full answer... - Recommeded Roof Rack And Crossbars For A 2017 Honda CR-V Carrying A Roam Adventure 95L CaseI recommend first adding a set of crossbars like the Yakima JetStream Crossbars # Y00428 with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245. Then I would add a platform roof rack like the Yakima LockNLoad Platform Roof Tray # Y05047. With this setup you will have no issue attaching your Roam Adventure 95L case to the roof of your 2017 Honda CR-V. Additionally, the mentioned crossbar towers and fit kit will only work...
view full answer... - Parts Needed to Order 70 inch Yakima Jetstream Roof Rack for 2016 Subaru OutbackTo do a 70 inch Yakima Jetstream roof rack on your 2016 Subaru Outback Wagon with the flush rail crossbar setup you'd need the Skyline Towers part # Y53TR, the fit kit # Y00241 and the crossbars # Y00427.
view full answer... - Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
view full answer... - Yakima Jetstream Roof Rack for 2019 Jeep Grand Cherokee with E-group PackageThe Yakima Jetstream roof rack made of parts # Y00425, # Y53TR and # Y00244 is a correct fit on your Grand Cherokee's E-Group roof configuration that has black and chrome tracks that are flush mounted and run front to back. Lock core kit # Y07204 is a correct selection and a worthwhile addition too for security. An install video is included for you. You do need to order each of these item numbers; we do not have one part for all. This rack features aerodynamic 50-inch crossbars that will...
view full answer... - Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
view full answer... - Recommended Roof Rack System Compatiable With Yakima SkyBox Lo 15 On 2019 Subaru Outback WagonThe Yakima SkyBox Lo Rooftop Cargo Box you purchased will fit the 50" Yakima CoreBar Crossbars # Y00421 you were looking at, and will allow you to open the rear hatch without interference. To install the # Y00421 on your 2019 Subaru Outback Wagon you will need the SightLine Towers for Yakima Crossbars # Y64AR, and Fit Kit # Y32CR if your Subaru is the Touring model. If you do not have the Touring Model you will need the SkyLine Towers for Yakima Crossbars # Y53TR, and Fit Kit # Y00241. Both...
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer... - What is the Best Roof Rack for a 2024 Subaru Outback Wagon w/out the Wilderness Rails?The best roof rack for a 2024 Subaru Outback Wagon without the Wilderness rails is the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 item # Y46VR
view full answer... - Roof Platform Rack Options for a 2014 Jeep Grand CherokeeWe have a few different options for adding a platform rack to your 2014 Jeep Grand Cherokee and it all depends on how you'd like to install it. If you'd like to install the platform rack directly to the flush rails (you'll need to remove your OEM crossbars) then we have the following: Yakima LockNLoad - Parts # Y05044, # Y53TR, # Y05042-2, and # Y00244 Rhino-Rack Pioneer - # RR74AB If you'd like to install a platform rack to your OEM crossbar system then we have the following: Yakima...
view full answer... - How to Obtain Larger Crossbar Spread On a 2014 Subaru Outback WagonThe Yakima JetStream Crossbar System part # Y00425, part # Y53TR, part # Y00239 would be a great option for a 2014 Subaru Outback Wagon. It will provide you with a 30" crossbar spread which will be the most that's available. Unfortunately, you won't be able to move any attachment points for the systems outside of what is recommended as these points are chosen based on the strong points of the roof. The systems that attach to the raised side rails all have a 20-21" spread.
view full answer... - Low Profile Roof Rack for 2023 Subaru Outback TouringThe lowest profile roof rack that fits your 2023 Subaru Outback Non-Wilderness is the Yakima Jetstream roof rack part numbers # Y00428, # Y53TR, and # Y46VR which also has the wider 50 inch bars you are looking for that extend past the feet of the rack.
view full answer... - Availability Of Trailer Hitch For 2023 Kia Soul GT-Line With Center ExhaustIf you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (July 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece and...
view full answer... - Recommended Crossbar System For A Camper Shell On A 2013 Toyota Tacoma Double CabFor your 2013 Toyota Tacoma Double Cab with a camper shell, I recommend checking out the: -Yakima JetStream Crossbars # Y00425, with the SkyLine Towers for Yakima Crossbars # Y53TR, and the Landing Pad 24 for Yakima SkyLine and Control Towers # Y74FR. These crossbars measures 50" long x 3-1/8" wide x 1" tall, is designed to be mounted to naked roofs like what's on your LEER camper shell, and has a maximum weight capacity of 165-lbs. Attached is a product review video for you to check...
view full answer... - Recommended Yakima Roof Rack for a 2016 Honda CR-V LX With No Existing Rails or CrossbarsYou definitely do not have to worry about drilling holes into your 2016 Honda CR-V LX. The landing pads that Yakima provides simply install into your fixed mounting points already on your roof. If your roof has the flush mounted rails that run front to back then I recommend going with the JetStream Roof Rack option by Yakima as it will produce less wind noise and drag than a standard roof rack option. For this setup you will need the JetStream Crossbars part # Y00426, the SkyLine Towers...
view full answer... - Yakima Roof Rack to Replace OEM Roof Rack on 2014 Subaru Outback WagonYou've read correctly! I recommend installing the JetStream crossbar system on your 2014 Subaru Outback Wagon so you will need to remove your OEM crossbars and then use the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 13 - # Y00239 Lock Cores - # Y07204 (optional) The Landing Pad 13 fits in the same mounting locations as your OEM crossbars like what you've read.
view full answer... - Recommended Roof Rack and Rooftop Tent for a 2013 Jeep Grand CherokeeIn order to install a rooftop tent on a 2013 Jeep Grand Cherokee you'll first need to start with a roof rack, the Yakima CoreBar Crossbar System part # Y00421, part # Y53TR, and part # Y00244 is a great option for models with black and chrome flush side rails. This can then be used to attach a rooftop tent such as the Yakima SkyRise HD Tent for Roof Rack Crossbars part # Y07436 which is what I recommend.
view full answer... - Can Yakima Q Towers Be Installed on a 2020 Subaru Outback WagonThe Landing Pad 27 does fit your 2020 Subaru Outback Wagon, but this landing pad is only designed to work with the SkyLine and Control Towers. Unfortunately Yakima only manufactured the Q Towers from 1993 to 2004 so they didn't keep up with fit kits for newer vehicles. So while the Landing Pad 27 fits your vehicle, the kit isn't compatible with your Q Towers and Yakima doesn't have a fit kit for the Q Towers to fit your vehicle. For a complete Yakima roof rack system on your 2020 Outback...
view full answer... - Yakima Crossbar Length For 2022 Lexus GX 460 & HullavatorI checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
view full answer... - Rhino-Rack Roof Rack That Fits 2014 Mercedes-Benz E350 CoupeWe do have a Rhino-Rack roof rack that fits your 2014 Mercedes-Benz E350 coupe, although it isn't the part you mentioned, which is only a fit for camper shells. Instead, the correct part for your Mercedes is: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for SkyLine and Control Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This rack will fit your 2014 Mercedes E350 couple with or without the panoramic roof, which...
view full answer... - 2015 Lexus GX 460 Roof Rack RecommendationYes, it does appear that you could replace the flush rails with raised rails. We do not carry any rails that offer that solution for your 2015 Lexus GX 460, but the rack I am recommending will definitely meet your needs by attaching to the flush rails already in place on your roof. The 2015 Lexus GX 460 Roof Rack by Yakima will work on your vehicle. It consists of the following items; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425 SkyLine Towers for Yakima...
view full answer... - Solution For Transporting 4 Various Types Of Bikes On A 2020 Kia SoulI have a solution for you, but since the 2020 Kia Soul can only use a Class 1 hitch receiver, you will be limited to hauling only two bikes on the hitch receiver. A trunk-mount bike rack will be your best option for carrying up to 3 bikes on your Kia Soul. I would look into the Malone Hanger BC3 OS 3 Bike Carrier # MPG2139 which is confirmed to fit your vehicle. It can safely hold 3 bikes weighing up to 33lbs each; the carrier only weighs 15lbs making it very easy to install with one person....
view full answer... - Yakima Roof Rack System For Flush Rails On A 2021 Toyota Rav4I understand how it can be overwhelming at first, but that's why I'm here! I do like the Yakima Skyline Towers # Y53TR so definitely get those. The Skyline towers need to mount to what they call a Landing Pad. For your 2021 Toyota Rav4 you need the Landing Pad 23 # Y98FR. The landing pad will use a threaded hole inside your tracks to secure it to your vehicle and the Skyline towers will connect to that! As far as bars go, the longest crossbar length kitted for your 2021 Toyota Rav4 is...
view full answer... - Is Yakima Landing Pad 1 Compatible With Rhino-Rack RTC-Style Roof Rack Tracks - Channel MountYes, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long - Qty 2, part # RTC18, will work with Yakima's Landing Pad 1. The rack will consist of the following; SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR, Two pair of Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204, and the correct sized Yakima crossbars. The...
view full answer... - 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau CoverAs long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
view full answer...
- Availability Of Trailer Hitch For 2023 Kia Soul GT-Line With Center ExhaustIf you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (July 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece and...
view full answer... - Rhino-Rack Roof Rack That Fits 2014 Mercedes-Benz E350 CoupeWe do have a Rhino-Rack roof rack that fits your 2014 Mercedes-Benz E350 coupe, although it isn't the part you mentioned, which is only a fit for camper shells. Instead, the correct part for your Mercedes is: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for SkyLine and Control Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This rack will fit your 2014 Mercedes E350 couple with or without the panoramic roof, which...
view full answer... - Solution For Transporting 4 Various Types Of Bikes On A 2020 Kia SoulI have a solution for you, but since the 2020 Kia Soul can only use a Class 1 hitch receiver, you will be limited to hauling only two bikes on the hitch receiver. A trunk-mount bike rack will be your best option for carrying up to 3 bikes on your Kia Soul. I would look into the Malone Hanger BC3 OS 3 Bike Carrier # MPG2139 which is confirmed to fit your vehicle. It can safely hold 3 bikes weighing up to 33lbs each; the carrier only weighs 15lbs making it very easy to install with one person....
view full answer... - Recommended Platform Rack for 2019 Mercedes-Benz Metris Van With Naked RoofWe do have a way to add a large platform rack to your 2019 Mercedes-Benz Metris. What you will need to do is add a roof rack from Yakima, which you can then attach a Yakima Platform tray to. Here are all the parts you need, starting with the roof rack, and then the tray. Roof Rack - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima SkyLine and Control Towers # Y00248 - Yakima Same Key System (SKS) Lock Cores # Y07204 Platform...
view full answer... - Options For Hauling Bikes And Kayaks On A 2024 Subaru Impreza To haul both kayaks and bikes on your 2024 Subaru Impreza you'll need a roof rack and trailer hitch/bike rack. Starting with the trailer hitch, if you don't currently have one then I recommend the Curt Trailer Hitch Receiver # C11465. This hitch has a 200lb tongue weight capacity and 1-1/4" receiver tube opening. A bike rack like the Hollywood Racks Destination # HLY94FR could be used to haul your bikes, as long as your bikes weigh less 35lbs or less. If you could provide more info on your...
view full answer... - Will the Yakima JetStream Crossbar System Work On a 2020 Subaru WRX with Sun RoofThe Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00248 is a great option for a 2020 Subaru WRX and it will work on models with a sunroof. That said, you need to be mindful when using the sunroof with the roof rack attached as you will have a reduced overhead clearance with the rack installed but there are no other issues aside from this according to Yakima. It does mount in the factory fixed points.
view full answer... - Does Yakima Roof Rack Come With Everything to Install on 2018 Subaru WRXYes the 2018 Subaru WRX Roof Rack by Yakima comes with everything needed to attach directly to roof of your 2018 Subaru WRX. This complete system is made up of Item Numbers: # Y00425, # Y00148, and # Y00248.
view full answer... - Roof Rack and Snowboard Carrier for a 2007 Mazda 3If your 2007 Mazda 3 Hatchback has fixed mounting points, I recommend the Yakima JetStream Roof Rack, part # Y00425, # Y53TR, and # Y00248. This will mount to the points in your roof. This aero style rack also has channels in the top of the roof rack that allows additional flexibility with accessories. If you don't have fixed mounting points, I recommend the Sport Rack Semi-Custom roof rack, part # SR1010. This clamping square bar rack will easily equip to your vehicle, letting you carry...
view full answer... - Will Yakima Jetstream Roof Rack for 2024 Subaru Crosstrek Support Roof Top TentYes, the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, # Y00248 that fits your 2024 Subaru Crosstrek Wilderness does have the weight capacity for the roof top tent you mentioned. This has a dynamic weight capacity of 165 lbs but does not have a static capacity. What we can determine from the dynamic weight capacity is that it is rated high enough for the tent and weight you mentioned.
view full answer... - Roof Rack For A 2022 Subaru LegacyFor your 2022 Subaru Legacy, I recommend the Yakima HD Crossbars # Y01156. These bars are square like you mentioned you wanted, and, have a maximum weight capacity of 500 pounds. You are also going to need an HD bar adapter, and landing pads. The matching HD bar adapters are # Y03541, and landing pads are # Y00248.
view full answer... - Is There A Roof Rack For A 2022 Subaru LegacyThe Landing Pad 22 for Yakima SkyLine and Control Towers does fit your 2022 Subaru Legacy. In your installation manual there are specific instructions for cars that have two holes in the roof of their vehicle instead of one. I have included the picture from the installation manual below. The Yakima roof rack I recommend consists of the following; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425, SkyLine Towers for Yakima Crossbars - Fixed Mounting Points,...
view full answer...
- Roof Rack Options For Hauling Two Kayaks On A 2022 Subaru Forester Saddles/racks typically have some sort of cushion or rubber to help prevent sliding and offer multiple tie-down points so they are typically better than just laying the kayak onto the crossbar. The Malone AirFlow2 Roof Rack # MPG215 has 50" crossbars. If you subtract 34" from that you're left with 16" which is a bit smaller that most J-Style kayak carriers so you'd likely not have enough room. Since the Malone # MAL98FR angles up you might be able to clear the fishing kayak, but this would...
view full answer... - Roof Rack and Roof- Mounted Bike Rack for 2020 Mercedes E350There is a roof rack that will fit a 2020 Mercedes-Benz E350 4-door sedan, with the best option coming from Yakima. This is the best rack for your Mercedes because it has the most crossbar space so you can mount your Boss recreational bikes on Yakima roof-mounted bike racks. The roof rack consists of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima SkyLine and Control Towers # Y00248 This roof rack will look graceful atop...
view full answer... - Yakima Landing Pad 22 Torque SettingsThe instructions for the Landing Pad 22 # Y00248 specifically state not to overtighten so you don't damage your 2019 Subaru Forester so I definitely don't recommend just going to town on it. What I would do is make sure you have that washer in the correct orientation (concave side up) and that you've wiggled the Landing Pad 22 around a little when initially tightening it to get it snug. Once that is done then go ahead and torque it to 1.5 Nm per the instructions. Let me know if you're...
view full answer...
- Recommended Aero-Style Roof Rack for a 2018 Mazda 3I recommend going with the Yakima JetStream roof rack system for your 2018 Mazda 3. These are aero-style bars that are made of aluminum so they are not only lightweight but they also have excellent corrosion resistance. The reason that I like the JetStream bars over other aero bars is that they are designed so that you don't have to remove or cut the rubber strips on the top and bottom which help cut down on the wind noise. If you have the fixed mounting points on your roof then you need...
view full answer...
- Recommended Roof Rack For Carrying A Kayak On A 2022 Subaru LegacyIf you will be taking your kayak to and from the beach, the Yakima JayLow # Y04073 is definitely a good option. This will fit just about anything, folds flat when not in use, and can carry up to two kayaks, with the addition of a set of Bow/Stern Tie-Down Ropes # Y04031, if ever needed. Now to get this attached to your 2022 Subaru Legacy, let's check out the roof rack. For this, I recommend the Yakima JetStream Crossbars # Y00425, SkyLine Towers # Y53TR, and Landing Pad 22 # Y00248. Going...
view full answer... - Recommended Roof Rack for a 2024 Subaru Forester w/out Roof Rails To add a set of crossbars to your 2024 Subaru Forester without roof rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248
view full answer... - Roof Rack Recommendation for 2019 Subaru Forester with Bare RoofI really like the Yakima JetStream roof rack systems because they are high quality, look great, and they have adjustments in the legs to make the crossbars level with each other. Here are the parts you'll need for your 2019 Subaru Forester: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 22 - # Y00248 Lock Core Kit - # Y07204 The black strips on your roof have little cutouts you'll either flip open or remove altogether and that's where the Landing Pad 22 will anchor...
view full answer...
- Is There a Compatible Fit for Thule 400xtr on 2016 Mazda 3?If Thule still made fit kits for your Rapid Aero Towers you would likely just need a fit kit, but they stopped making those towers and fit kits in 2009 as you stated so no vehicles newer than that have a compatible fit. For your 2016 Mazda 3 if you have fixed mounting points the only roof rack we have available is from Yakima using the JetStream bars either part # Y00425. Then use parts # Y53TR and # Y00248 for the towers and landing pads.
view full answer... - Recommended Roof Rack for a 2024 Subaru Legacy w/ No Roof Rails Yes, we do! To add a roof rack, that doesn't extend past the mounting legs, to your 2024 Subaru Legacy with no roof rails, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y38UV Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248
view full answer... - Roof Rack For 2023 Mazda CX-30 For Yakima SkyBox NX 18It does! The crossbar spacing on your 2023 Mazda CX-30 will indeed allow you to use and fit the Yakima SkyBox NX 18 Rooftop Cargo Box # Y45AV. Then since you mentioned not having a roof rack, the correct fit for a naked roof on your '23 CX-30 is made up of the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers # Y53TR - Landing Pad 22 # Y00248
view full answer... - Recommended Roof Rack to Use the Thule Hullavator Pro on a 2018 Subaru ForesterThe best roof rack to for you to install on your 2018 Subaru Forester so that you can use the Thule Hullavator Pro # TH898 is the Yakima JetStream roof rack. If you have a naked roof then you would need the JetStream Bars # Y00425 along with the SkyLine Towers # Y53TR and the Landing Pad 22 # Y00248. If you have the raised rails then you just need either of the crossbars mentioned above along with just the TimberLine Towers # Y33TR. To deter theft of your roof rack system you can also...
view full answer... - Can 60 Inch Yakima CoreBar Roof Rack Be Used on 2021 Mazda 3You can indeed use the longer 60 inch Yakima CoreBar crossbars. To equip your 2021 Mazda 3 with a Yakima CoreBar roof rack, you'd need the following: • Yakima 60 Inch CoreBar, part # Y00422 • Yakima SkyLine towers, part # Y53TR • Yakima Landing Pad 22, part # Y00248 which attaches towers to existing mounting points on vehicle roof. I'll link to some product videos that you might find helpful.
view full answer... - Recommended Fixed Point Roof Rack for Carrying a Kayak with a 2019 Subaru ImprezaSince you are wanting to use longer crossbars I recommend going with a Yakima roof rack because the slot on the bottom of the crossbars (where they mount to the feet) extend the whole length of the bar which means you can easily choose the length crossbar that you want to use on your 2019 Subaru Impreza. Typically this roof rack consists of the 50" JetStream Bars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 22 # Y00248. This mounts to fixed points on your roof and you can...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.