To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you’re loading up kayaks, canoes, or a cargo box, the last thing you want to worry about is flexing bars or weak points. These 46" steel crossbars are built from hardened steel and can handle up to 220 lbs of load. The elastomeric coating helps guard against corrosion, so they stay solid through years of trips in sun, rain, or snow.
You don’t need to replace your favorite carriers or mounts. The square bar design works with clamp-around accessories and carriers, so whether you’re packing for a weekend on the water or a long road trip, your gear fits right on. The overhang setup gives you extra usable space for wider loads or multiple attachments at once.
Parking overnight at a campsite or trailhead shouldn’t make you worry about your setup. The leg covers are lockable to help deter theft, making sure your rack stays where you left it. The elastomeric coating not only prevents rust but also keeps the bars looking clean after seasons of use.
This complete system includes two square crossbars, four square bar feet, and a custom fit kit designed for vehicles with fixed mounting points. Once installed, it sits tight and stable across the roof—ready for cargo boxes, camping gear, or whatever your next trip calls for.
Ratings & Reviews
What a valuable resource this has been for us. We have used it for hauling lumber, hay, ladders and tables......Great product thanks!
These bars are excellent. I like the coating to protect whatever you're hauling. There is absolutely 0 flex with my kayak mounted, unlike the aluminum aero bars I upgraded from.
Missing Parts - I am missing two of the end-caps for the INB117. What is the deal with INNO quality control that it cannot get 4 of these in a box at the same time and tape it shut? I did a search on Google and apparently this a a known QC issue!
The product itself seems good, but I wouldn't know yet because I do not have all of the pieces needed to install. I wish it was made a little more clear in some form of guide exactly what is needed to be able to install on my vehicle. Not to mention I ended up having to pay shipping this time since it ended up being two separate orders.
I occasionally carry building materials that are too large for the inside of the vehicle and this roof rack is sturdy and attractive. The square bars are strong, and the connectors are easy to attach and remove on the factory roof rails. Etrailer.com is the best!
these work great in the roof style of the 2007 forester. They DO NOT come with the parts needed to attach them from etrailer so read carefully to make sure they will work with your vehicle.
I was really pleased with the price and how quickly my crossbars arrived. Also, being able to access the installation guide on the website was awesome because the instructions that came in the box were more general.
I have only had these on for a few days but all seems well. Very little extra noise although I can hear a bit when I'm going over 100 km/h but nothing too bad at all. Installation was extremely simple and straight forward. Took me all of 20 minutes and most of that was just making sure the cross bars were exactly parallel. These shipped to my house (just outside of Toronto) in around 4 days with no extra border fees which was fantastic. I only wanted these to strap a canoe onto the roof of my Jeep Cherokee Trailhawk so I didnt need anything too heavy duty or bulky and this fits the bill perfectly.
I had been looking a very long time for a roof rack for my 2014 Jeep Grand Cherokee. I wanted round or tubular crossbars, different from the “air foil” style, which were the only kind available from the factory and the many imitators. I finally found etrailer, and these fit the bill perfectly. The attachments fit the rails just like the factory model, and hold the rectangular cross bars firmly. A sturdy and solid product. And even with free shipping they arrived the morning of the second day after I ordered them, in time for the trip I was planning to take with them.
Excellent quality rack adapter. I have used Inno products for a number of years and they are just as good as Thule or Yakima and lower in price. I am using these feet with a square bar system I have had for years. Got a new vehicle with different rails and was please that there were adapters available from Inno.
I am more than pleased by the service that I had at etrailer. I was looking for a very old roof rack for my Subaru Legacy 2007 and etrailer had it. I was suspicius about it so I wrote them and got a quick and friendly answer that confirmed the fit and availability. Delivery was quick and the tracking from etrailer website was outstanding.
The customer service representative was friendly, answered all of my questions, and arranged for same day shipment. It arrive missing some end caps, and when I notified her of this, she had a replacement set sent out. I would recommend etrailer for any of your bike roof rack purchases
Pros: adjustability, price, sturdy construction, decent appearance.
Cons: square tubes = wind noise, must remove rubber ends to mount/dismount, be careful not to strip out the hex screws
Overall impression: A good, versatile occasional use rack if you don't want a clamp on.
This Inno rack is a sturdy, basic rack. What I like best about it:
- It actually mounts to the roof tracks on my 2015 Jeep Grand Cherokee (with the INTR132 fit kit), instead of to hard points on the roof like many other racks.
- It lets me use my Thule bars and accessories because Inno and Thule bars are the same size.
- It was much less expensive than the other racks I looked at.
- It is pretty easy to put on and take off.
What I don't like as much:
- The locking covers that go over the towers are pretty flimsy, and look like they are on crooked even when installed correctly
- This rack is quite noisy on the Grand Cherokee, but I think that's just the nature of the rectangular bars. (But since it is easy to take off, I plan on only putting it on the car when needed).
Also, thanks to the folks at etrailer for helping me figure out what would work best for my needs!
Had used Thule bars for years on multiple cars. Sadly found out Thule didn’t make a mount for my new Lexus GX. And I was about to throw in the towel, but found that the ”Inno” footing would work with my car and with my old Thule bars! They work great on my new car. Thank you etrailer for having the only website search engine that could recommend the parts I needed.
Cheers!
Easy to install. Installed with the wife in about 30 minutes with the Inno foot pads. No wind noise.
I got the whole kit...on Marc C's recommendation. He was so very patient and helpful! The kit is great. I am not so versed in doing such things so my neighbor put it on the car for me. He was just over and over again extolling the Praises of the instructions. He said they're the best ones he ever used. It fits on the car, it feels solid, and it looks great. I'm very very happy with it. Thank you so much!
Product arrived on time and packed very professionally. Was very satisfied with the overall quality of the product. Everything went right together and fit perfectly. I dealt with a gentlemen named George J. He was very professional and extremely helpful throughout the whole process with updates letting me know how my order was going. Very happy with the product.
Fit was good. Hauled a roof top carrier 2000 miles with no issues. Wind noise was minimal.
Great Product! Shipping was very fast for free shipping, and product was packaged well. Installation was a breeze, and only took about 30 min. I am very pleased with my purchase!
One of the lesser expensive rack kits for the Mazda5. etrailer delivered excellent! They had items in stock and shipped quick. I finally had a chance to install it this evening. My only frustration was evening out the bars. Measure, adjust and measure and adjust. I'll look into getting a fairing to reduce wind noise.
We bought this along with the INTR102 Custom Fit Kit. We used this to mount Thule crossbars and a Thule Adventurer cargo box on a 2001 Subaru Forester. Everything fit perfectly. The Inno mounts were completely compatible with the Thule crossbars. The fast and accurate shipping helped avert a crisis before a cross country trip.
I got these to replace my OE roof racks. The square shape is perfect for Yakima Bowdown kayak racks. Solid!
Fit perfectly on our 2007 Subaru Legacy Wagon w/flush mount rails. We had our doubts but put our faith in C.S. Rep. He was right (of course)!! The fit on the stock rails perfectly. My husband didn't really have trouble installing them at all. We also got the Inno Fit Kit Hooks and the Inno Square Crossbars. Just came back from vacation. They were perfect for my husband's bike. (We did have Thule rails from an earlier bike rack. They fit into the Inno system w/o a problem. Thank You ETrailer for ALL your help. We couldn't have put it all together without you knowledge. Perfect!
I was using Yakima Bowdown Kayak racks on my OE roof racks. The shape of the OE cross rails just didn't work well with the racks, and they were always loose. I installed the Inno square tube racks from Etrailer, and all is right in my world. Easy installation (thanks for the detailed instructions!) and a solid feel! No whistling, either! Quick shipment, best price anywhere! Thanks, Etrailer!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.