To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima 50" CoreBar SM:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. It's Angelina here etrailer.com. And, today we are looking at our Yakima roof rack system with baselines towers and jet stream crossbars, here on our 2021 Honda accord. On your Honda accord, If you want to carry around a safe bike racks or roof basket, but you don't have a hitch you can pick up a roof rack like this from Yakima. And this works for naked roofs. Just like what we have here on our car.
It has a custom fit hook that way when you install it and tighten it down, you can even slam your doors on it without having to worry about it denting or scratching your car. This roof rack system comes with jet stream crossbars which I really like since they're Yakima's aerodynamic crossbar options. They come with T track channels, and this can be used with your T-track accessories at mount straight into there. And that don't need to be clamped around, which I like since that allows you to use the full crossbar space. This has 165 pound weight capacity.
So, when you do have this loaded up also make sure to follow whichever is lower whether it's your crossbar capacity or your brief weight capacity. These are the 50 inch crossbars here on our accord, which I like cause they have minimal overhang with a smaller car like this is nice because then you're less likely to bang your head against longer crossbars, which I've learned the hard way. So, we'll take some measurements. This has an overhang of an inch from the tower to the end of the bar before the end cap but you can also pick up longer bars, If you want that overhang. Let's also take some measurements for clearance purposes.
Your distance between the bottom of the bar to the top of the roof at the closest point is three and five eighth. As for the height of the roof rack from your roof it sits at four and a half inches. These are baseline towers with the option to lock them. So, if you purchase four locking cores, you can pop those in and make sure that they are key to like with your other Yakima accessories. You are limited by how this system is measured.
So, you do get a crossbar spread of 32 inches. So, just keep that in mind when you're thinking about roof baskets or cargo baskets. So, I already installed the front bar and we're gonna install the rear bar together. Now, what you first have to do is set up your crossbar. You have to take out the strip that is inside and then cut it later to fit, Once you have your towers installed. And from here, you have to install your towers. You're going to first installed these steel plate that slides into your crossbars. So, on underneath your tower there will be this tab you have to open. So, open that up. That tab is right over here and that will allow you to tighten it down with the included tool. So, just put that steel piece right on that bolt and then tighten it down to attach it. Just make sure it's loosely attached loose enough that you can still slide it into the crossbar but tight enough, that is attached to your tower. And once that is in place you can then slide your tower onto your crossbar. There you go. Here on your crossbar, You're also going to loosely tighten it down but just enough so that it doesn't come off your crossbar. We'll also check it later to make sure you have it in the right position before you tighten it down fully. Now, your fit kit comes with different foot packs. Now, you have to make sure you're using the right foot back for the right cross bar. Sometimes, it's different for the front and the back. Here on the back, we have a different size from the front. So, we're having this on the rear crossbar, just pop it onto your tower and you can do it with the tower on or off. I like to do it with it on the crossbar just so we get faster. There's an arrow underneath the foot pack and make sure that it's facing the outside of the crossbar or away from your vehicle. Now, you're gonna hook your hook onto your tower. Now, see that tab inside your tower. You're going to have that inside and that's what your hook attaches to and then down. So, once that's in place, you can tighten it down just enough to keep it in place but loose enough to attach your car. From here, you're gonna put it on your vehicle. And I recommend having a friend help you grab the other end as you put it on your roof, just like that. And then place it loosely, before you take measurements to find out it's exact spot. The instructions on your fit kit will have instructions for where you will place the towers. Here on our 2021 Honda accord for measuring eight inches from the end of the glass to the front of our tower. And from that front tower, we're going to measure 32 inches from the front of the lead crossbar to the front of the rear crossbar. So, this needs to be 32 inches away. So, I'm going to move my tower over a little bit towards the rear. Once your crossbars are 32 inches apart to the edge of the crossbar, right over there, you can then tighten down your tower underneath, and this will tighten down the hook and keep turning until it clicks twice, like a gas cap. There we go. Once you have it tightened down, you can then put that lid into place and then put your front cover on make sure to hook it in from underneath right there and it pops into place. And that's it for the install. My final thoughts about this whole system is I do like how it is a nice streamlined look on my vehicle. It has minimal overhang and it looks very sleek and minimalistic. One thing though it was kind of difficult to get it all lined up. So, be sure to double check your measurements and make sure you follow the instructions or else just a little bit of a change here and there may make it a lot more difficult to install it tightly and securely. But, once you have it all down I think it's a great roof rack that gives you the opportunity to carry around all that you need for your adventures on your Honda Accord. Also, I like to use my Moki doorstep just to give me a little extra height and leverage as I get up there. And that was in look here at our Yakima roof rack system with baseline towers and jet stream crossbars, here on our 2021 Honda Accord..
Average Customer Rating: 4.8 out of 5 stars (246 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Follow the instructions, and you can't go wrong on the self installation
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
As described! Quick delivery!
Great fit, holds tight to roof.
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
Great product great service
Well packaged and on time
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Should include extra end caps just in case they fall off.
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water.
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
etrailer's selection process, delivery ann installation help both online and on the phone was excellent
Very sturdy, well made. The assembly instructions are not too good but if you call Yakima they will provide additional instructions.
Great product fast shipping
Great! Easy to install!
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.
Solid build quality and easy installation on my '21 Mazda CX-5.
Feel solid, not too tricky to install
THERE'S A PIECE MISSING, A rubber cap on 1 of the crossbars
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.