Rhino-Rack Sportz Roof Rack for Tracks - Aluminum - Black - Qty 2

See what our Experts say about this Rhino Rack Roof Rack

• Can Rhino Rack Sportz Aero Crossbars be Used in ARE Cap Channels
  Hey Ken, yes you can use the Rhino Rack crossbar set part # RR25AG in the tracks of your ARE cap with the feet kit part # RRRLT600 and you'd be set. What are you planning on carrying with the rack?
  view full answer...
• Can A Thule Hullavator Be Installed On A Roof Rack With Less Than 4" Of Overhang?
  Hi Lisa! The 4" minimum overhang isn't necessarily a recommendation. Anything under than and the Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs - Saddle Style - Universal Mount # TH898 could potentially hit your 2022 Ford Explorer when lowered. That would be a pretty terrible thing to have happen. Is there any way you can have the crossbars offset to one side to get that 4" overhang? If there isn't, or you were wanting to put one on each side, you have two options. First...
  view full answer...
• Which Rhino Rack Pioneer Platform Can Attach to Vortex Aero Crossbars
  I have a solution for you, but the Rhino Rack Pioneer Platform # RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of the Pioneer platform that can be attached to Rhino Rack Vortex Aero bars: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum...
  view full answer...
• What Roof Rack Do You Recommend for a Camper Shell with Tracks?
  For a great roof rack system for your A.R.E. Mx truck cap, I recommend the Rhino-Rack Roof Rack for Factory Tracks - 59" # Y02-490B-NT. The Rhino-Rack Roof Rack includes 2 Vortex Aero black, elliptical crossbars that you can use to hold ladder racks, conduit cases, and other work accessories. In addition, the Rhino-Rack Roof Rack crossbars come with a 220 pound weight capacity. I recommend checking the user's manual on your camper shell to make sure it can accommodate that much weight. If...
  view full answer...
  
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Can I Fit A Rhino Rack Pioneer Platform To My Retrax XR Series Tonneau Cover
  You have two options; The first option is to install the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers - Black - 65" Long, part # RRVA165B and part # RRRLT600. The feet attach directly to the RetraxPrO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots, part # RTT-80852. The Vortex Aero crossbars will attach to the the legs. With this fit you will be limited to Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48"...
  view full answer...
• Roof Rack or Ladder Rack for Trailer For Roof Top Tent
  There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an enclosed trailer with rain gutters you can install the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. Another option is to use a track-mounted system from Rhino-Rack. You will need the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128, Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 and crossbars,...
  view full answer...
• What Adapter Will Fit My Retrax Tonneau Cover to Let Me Use the Yakima OverHaul HD on My 2019 Tacoma
  If you have a Retrax tonneau cover on your 2019 Toyota Tacoma (5-ft. bed) like the RetraxONE XR # RTT-60851 or the RetraxPRO XR # RTT-80851, the adapter that you need to use the Yamkima OverHaul HD # Y01151-58 is the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. As far as mounting a Rhino-Rack pioneer platform on the OverHaul HD, the only platforms that will fit are the Rhino-Rack Universal Pioneer Platform Rack part # RR42114BF which is 48" long x 38" wide and part # RR42115BF...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Recommended Truck Bed Crossbar Kit for a 2024 GMC Sierra 1500
  Tony, the only way I understand you'd be able to use your Rhino-Rack bars # RR63ZE with your 2024 GMC Sierra is by installing a tonneau cover with T-slots so you can then use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600. If you didn't want to also install a tonneau cover, then your only other option would be a new system in which you could use the Yakima BedRock HD Truck Bed Rack # Y01160-59, which would not require a tonneau cover, simply just clamps onto your...
  view full answer...
• Can Rhino Rack Sportz Aero Crossbars be Used in ARE Cap Channels
  Hey Ken, yes you can use the Rhino Rack crossbar set part # RR25AG in the tracks of your ARE cap with the feet kit part # RRRLT600 and you'd be set. What are you planning on carrying with the rack?
  view full answer...
• Can the Pioneer Platform Rack Fit the Rebel Off Road Xplor Rack?
  Hey Dave, thanks for reaching out! Your best bet is going to be a combination of the Rhino-Rack Quick Mount Legs # RRRLT600. These mount directly to the Pioneer Platform Rack and then mount to a track system using the T-Bolts that are spaced 2-5/8" apart on center (see attached). I reached out to Rebel Off Road and they suggested checking out their Tent Standoff Brackets and/or their Cross Bar Mounting System, but none of this has been tested together so I can't confirm any of this will...
  view full answer...
• Recommended Crossbars and Feet for a LEER Camper Shell with Thule Tracks
  Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar Crossbars # TH711520, or you can use the Rhino-Rack Vortex Aero Crossbars # RRVA165B-2 with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 for a more cost-effective non-Thule setup.
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Will 65" Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover T-Slots On A Ford F-150
  Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in order to fit. To mount the 65" crossbars # RRVA165B-2 in the track you'll need their quick-mount legs # RRRLT600.
  view full answer...
  
• What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?
  I have a great platform solution for you. Unfortunately, the Rhino-Rack Pioneer Platform 72" Long x 56" Wide RR42108BF is discontinued. However, with the recommended fit of the Rhino-Rack Pioneer Platform Rack for Short Camper Shells - Backbone - 60" Long x 56" Wide # RR63ZW, you will have both the platform and the mounting hardware available for installation with the modular Backbone. The Modular Backbone is designed to fit the track on the 100XR.
  view full answer...
• Will 59" Crossbars Work on a 2003 Chevrolet TrailBlazer EXT?
  Yes, they will Justin. The 59" Rhino-Rack Vortex Aero Crossbars item # RRVA150B-2 will attach to the roof of your 2003 Chevrolet TrailBlazer EXT using the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600. You are correct they are going to over hang quite a bit. The 46" Long Rhino-Rack Vortex Aero Crossbar item # RRVA118B are what's recommended for your Trailblazer. The Yakima ForkLift Roof Mounted Bike Carrier item # Y02098 will definitely work with Rhino-Rack crossbars....
  view full answer...
• Length of Rhino-Rack RT-Style Roof Rack Tracks RRRTS547 on 2017 Toyota Tacoma Double Cab
  The tracks included in the Rhino-Rack RT-Style Roof Rack kit # RRRTS547 (same as RTS547) are each 47" inches long. These are not the crossbars but the rivet-mount tracks that mount permanently to a vehicle or camper shell roof to allow installation of track-mount legs such as # RRRLT600. These legs in turn accept crossbars like # RRVA150B-2 which are 59-inches long; other lengths are available. It sounds like you may prefer a custom-fit cab roof rack rather than a general-purpose track-based...
  view full answer...
• Replacement Leg Tower and Foot for a Rhino Rack RTL600
  Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600 but I have a two pack item # RRRLT600H.
  view full answer...
• Best Roof Rack Options for a 2016 Land Rover Discovery/LR4
  Absolutely! A Land Rover Discovery is referred to as the Land Rover LR4 here in North America. This is not to be confused with the Land Rover Discovery Sport which is an entirely different vehicle altogether. The Discovery/LR4 came with two different roof options which were a bare roof and roof with factory installed tracks. If you have the factory installed track system then you can use the Rhino-Rack Vortex Aero Crossbar System which is composed of the the crossbars part # RRVA137B-2,...
  view full answer...
• Roof Rack Tracks & Basket That is Heavy Duty
  Hi Morris, While there isn't anything specific to your 2022 Roxor, there are rivet-mounted tracks you can add. I'm not sure the length you need, but the shortest available is the 36-1/4" long Rhino-Rack RT-Style Roof Rack Tracks # RRRTS540. Then you'd need a roof rack that fits the tracks, and for that you would add the Rhino-Rack Quick Mount Legs # RRRLT600. To complete the rack set up you'd need crossbars, with the right length depending on the width of your roof/cab enclosure. You...
  view full answer...
• Recommended Tonneau Cover and Bike Rack for a 2024 Ford Ranger
  Hey John, welcome back and thanks for the email! I was able to track down all of the parts in the pictures you provided and find the same model tonneau cover that fits your 2024 Ford Ranger XLT with a 5' bed. I have listed all of the parts below: Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover - Aluminum - Matte Black item # PE94NJ Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• How to Install the Batwing and Foxwing Awning Relocation Kit
  Here are the 2 different mounting options for installing the Batwing and Foxwing Awning Relocation Kit # RR31102. You can change the orientation of the brackets so that the awning will either hang higher or lower depending on your application.
  view full answer...
  
• Recommended Roof Rack for 2018 Mercedes-Benz Sprinter Factory Tracks
  We have a few systems that will fit the factory tracks on your 2018 Mercedes-Benz Sprinter. If you want the 2 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - 71" Long - Qty 2 # RRVA180B-2 Quick Mount Legs - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 Quick Mount Nuts - Factory Tracks - Qty 8 # RRQMFK11-2 Metal lock cores # RRVA-LEC4 If you want the 3 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71"...
  view full answer...
  
• Are 8 Quick Mount Nuts for Rhino-Rack RRQMFK11 Available
  We do indeed have the Rhino-Rack nuts you are looking for, in a quantity of 8; what you need is the following: - Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 8 # RRQMFK11-2
  view full answer...
• Which Roof Rack Will Fit A 2015 Mercedes Sprinter With Roof Rails?
  If your 2015 Mercedes Sprinter happens to have Thule or Yakima style tracks on the roof, then yes you can use a roof rack such as Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" # Y02-480B-NT or Silver # Y02-480-NT. If your vehicle has the Rhino-Rack style tracks on the roof then you can use Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" # RRVA137B-2 or Silver # RRVA137S-2 along with the necessary Legs # RRRLT600 and Quick Mount Nuts # RRQMFK11-2. I...
  view full answer...
• What Parts Do I Need To Install Rhino-Rack Roof Rack On 2020 Mercedes Benz Sprinter 2500 High Roof?
  Since your 2020 Mercedes-Benz Sprinter 2500 High Roof has factory roof rails running front to back then you can go with the Rhino-Rack Vortex Aero Crossbars or the Rhino-Rack Heavy Duty Square Bars. For the aero bars you need Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long # RRVA180B-2, Legs # RRRLT600, and Nuts # RRQMFK11-2. For the heavy duty square bars you need Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 71" Long # RB1800, Legs # RRRLT600, Nuts # RRQMFK11-2,...
  view full answer...
• Recommended Rhino-Rack Roof Rack For a 2017 Mercedes-Benz Sprinter 2500 With Factory Side Rails
  For your 2017 Mercedes-Benz Sprinter 2500 with the factory rails I recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1800B-2 with Rhino-Rack Quick Mount Legs # RRRLT600, Quick Mount Nuts # RRQMFK11-2 and Roof Rack Leg Spacer Blocks # RRQMHD05-2. You will need to replace the channel nuts that come on the legs for the larger M6 30 mm x 25 mm x 5 mm Zinc Nuts # RR96TB. The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT only uses 65" long crossbars and the only recommended...
  view full answer...
• What is the Best Way to Add Crossbars to a 2023 Mercedes-Benz Sprinter 3500?
  The best way to add a set of crossbars to the roof of a 2023 Mercedes-Benz Sprinter 3500 is to use the roof rack by Rhino-Rack which includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2 item # RRVA180B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 8 item # RRQMFK11-2
  view full answer...
• Recommended Roof Rack for 2017 Mercedes-Benz Sprinter 3500 with Roof Tracks
  I have an excellent roof rack option for a 2017 Mercedes-Benz Sprinter 3500 so long as you have the factory tracks that run front to back. In which case I recommend the Rhino-Rack Vortex Aero Crossbar System composed of part # RRVA180B-2, part # RRRLT600, and part # RRQMFK11-2. This is an aero bar system that works with a wide variety of rooftop mounted accessories and has integrated top channels for a low profile mounting option. The aero bars look great and are very quite. It offers a...
  view full answer...
• Front & Back Hitches With Accessories For Ultimate Mercedez-Benz Sprinter Van 3500
  The Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR is definitely the move for you, but if you plan on putting it in the front of your 2017 Mercedes-Benz Sprinter 3500, you'll need a front hitch # 306-X7352. For the back if you have a factory step bumper you'll need this hitch # 75601 and if you have a Standard bumper you'll need this one # 75549. In order to use the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR you'll need a class III hitch or higher. If you wanted to...
  view full answer...
• Parts Needed to Carry a Yakima LockNLoad on a 2021 Mercedes-Benz Sprinter 2500
  As long as you've got an existing roof rack system with crossbars then you can use the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 84" Long x 62" Wide # Y05049-39 since this comes with the hardware to mount to most factory and aftermarket crossbars. If you don't already have a roof rack then you will need to add one and the roof rack you need will depend on whether or not you've got the factory mounted tracks on the high roof. If you've got the tracks, then I recommend using...
  view full answer...
• Recommended Roof Rack for a 2024 Mercedes-Benz Sprinter 2500 w/ Factory Installed Tracks
  To attach a roof rack to the tracks on your 2024 Mercedes-Benz Sprinter 2500's roof you will need the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2 item # RRVA180B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 8 item # RRQMFK11-2 This aero bar roof rack system has a 165 lbs capacity. The included locks will help...
  view full answer...
• How to Mount a Platform Rack to the Roof of a 2019 Mercedes-Benz Sprinter 2500
  There is a possible solution for you, but there aren't any Yakima or Rhino-Rack platform racks that can fit your 2019 Mercedes-Benz Sprinter 2500 without having a crossbar system. For your crossbars, I recommend the Rhino-Rack Vortex Aero Crossbars, part # RRVA180B-2. They are aero-style crossbars that are better at reducing wind noise and drag than other styles. I've linked to a video review of these crossbars below. To mount these crossbars, you will need the Quick Mount Legs, part...
  view full answer...

Do you have a question about this Roof Rack?