See what our Experts say about this Rhino Rack Roof Rack

• Rivet Holes on a Rhino-Rack RT-Style Roof Rack Tracks for a 2016 Mercedes-Benz Sprinter 2500
  The Rhino Rack RT Style Tracks, part # RRRTS546 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500. However, you will need to drill two holes on the rear of each track to install the included rivets. The complete kit for this is: Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2 2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF Rhno Rack RT-Style Roof Rack Tracks,...
  view full answer...
• Heavy-Duty Roof Rack with 3 Crossbars for Solar Panels on 2020 Mercedes-Benz Sprinter 2500
  For your 2020 Mercedes-Benz Sprinter 2500 with the standard roof and track system I recommend using the Rhino-Rack HD roof rack system which consists of the following: 71" HD Bars - # RB1800B-3 4-Pack Legs - # RRRLT600 2-Pack Legs - # RRRLT600H Quick Mount Nuts - # RRQMFK11-3 Leg Spacers for HD Bars - # RRQMHD05-3 Please note that the Channel Nuts in RLT600 must be swapped out and the larger, N035A track nut, must be used in the track. The HD Bars have a C-Channel in the top that also...
  view full answer...
• 3 Bar Roof Rack Options For Roof Top Tent On A 2016 Ford Transit T350
  I recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1800S-3 over the Vortex Aero Bars # RRVA180B-3 because of the weight capacity. The Heavy Dusty Crossbars come in two colors, silver and black # RB1800B-3 and are 71 inches long with a weight capacity of 220 lbs apposed to the Vortex bars which only have 165. Both systems use the Rhino-Rack RLTP Legs # RRRLTPFC-3. This will give you the option to either mount your tent via T-Track or the tent can simply wrap around the...
  view full answer...
• Aluminum 3 Bar Ladder Rack/Roof Rack Recommendation for 2017 Ford Transit T150
  For a 3 bar roof/ladder rack confirmed to fit your 2017 Ford Transit T150 we have the Rhino Rack HD roof rack part numbers # RB1800B-3 and # RRRLTPFC-3 which would work really well. The bars are made of aluminum and for load stops you'd need the part # RRRLH and you'd be set. We also have ladder strap designed for the bars of this rack as well with part # RLS5.
  view full answer...
• Roof Track Rack For a 2016 Mercedes Benz Sprinter 144 inch High Roof Van
  Your vehicle is able to equip any of the roof kits available for the standard roof, but without the track equipped. If you'd like the Vortex AeroBar kit, you'll want: 1 Rhino-Rack Vortex Aero Bar 3 Pack, Silver, part # RRVA180S-3 or Black, part # RRVA180B-3 3 Rhino Rack RLTF Legs for OEM/Factory Mounting Points, part # RLTFMS 1 Rhino Rack RLTP Leg Adapters for OEM/Track Mount, part # RRVA-FK1-3 If you'd rather get the Heavy Duty HD Bars, you'll instead get: 1 Rhino-Rack Heavy Duty...
  view full answer...
• Which Rhino Rack Pioneer Platform Can Attach to Vortex Aero Crossbars
  I have a solution for you, but the Rhino Rack Pioneer Platform # RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of the Pioneer platform that can be attached to Rhino Rack Vortex Aero bars: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum...
  view full answer...
• What Roof Rack Do You Recommend for a Camper Shell with Tracks?
  For a great roof rack system for your A.R.E. Mx truck cap, I recommend the Rhino-Rack Roof Rack for Factory Tracks - 59" # Y02-490B-NT. The Rhino-Rack Roof Rack includes 2 Vortex Aero black, elliptical crossbars that you can use to hold ladder racks, conduit cases, and other work accessories. In addition, the Rhino-Rack Roof Rack crossbars come with a 220 pound weight capacity. I recommend checking the user's manual on your camper shell to make sure it can accommodate that much weight. If...
  view full answer...
  
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Can I Fit A Rhino Rack Pioneer Platform To My Retrax XR Series Tonneau Cover
  You have two options; The first option is to install the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers - Black - 65" Long, part # RRVA165B and part # RRRLT600. The feet attach directly to the RetraxPrO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots, part # RTT-80852. The Vortex Aero crossbars will attach to the the legs. With this fit you will be limited to Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48"...
  view full answer...
• Roof Rack or Ladder Rack for Trailer For Roof Top Tent
  There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an enclosed trailer with rain gutters you can install the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. Another option is to use a track-mounted system from Rhino-Rack. You will need the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128, Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 and crossbars,...
  view full answer...
• What Adapter Will Fit My Retrax Tonneau Cover to Let Me Use the Yakima OverHaul HD on My 2019 Tacoma
  If you have a Retrax tonneau cover on your 2019 Toyota Tacoma (5-ft. bed) like the RetraxONE XR # RTT-60851 or the RetraxPRO XR # RTT-80851, the adapter that you need to use the Yamkima OverHaul HD # Y01151-58 is the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. As far as mounting a Rhino-Rack pioneer platform on the OverHaul HD, the only platforms that will fit are the Rhino-Rack Universal Pioneer Platform Rack part # RR42114BF which is 48" long x 38" wide and part # RR42115BF...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Recommended Truck Bed Crossbar Kit for a 2024 GMC Sierra 1500
  Tony, the only way I understand you'd be able to use your Rhino-Rack bars # RR63ZE with your 2024 GMC Sierra is by installing a tonneau cover with T-slots so you can then use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600. If you didn't want to also install a tonneau cover, then your only other option would be a new system in which you could use the Yakima BedRock HD Truck Bed Rack # Y01160-59, which would not require a tonneau cover, simply just clamps onto your...
  view full answer...
• Can the Pioneer Platform Rack Fit the Rebel Off Road Xplor Rack?
  Hey Dave, thanks for reaching out! Your best bet is going to be a combination of the Rhino-Rack Quick Mount Legs # RRRLT600. These mount directly to the Pioneer Platform Rack and then mount to a track system using the T-Bolts that are spaced 2-5/8" apart on center (see attached). I reached out to Rebel Off Road and they suggested checking out their Tent Standoff Brackets and/or their Cross Bar Mounting System, but none of this has been tested together so I can't confirm any of this will...
  view full answer...
• Can Rhino Rack Sportz Aero Crossbars be Used in ARE Cap Channels
  Hey Ken, yes you can use the Rhino Rack crossbar set part # RR25AG in the tracks of your ARE cap with the feet kit part # RRRLT600 and you'd be set. What are you planning on carrying with the rack?
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Recommended Crossbars and Feet for a LEER Camper Shell with Thule Tracks
  Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar Crossbars # TH711520, or you can use the Rhino-Rack Vortex Aero Crossbars # RRVA165B-2 with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 for a more cost-effective non-Thule setup.
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Will 65" Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover T-Slots On A Ford F-150
  Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in order to fit. To mount the 65" crossbars # RRVA165B-2 in the track you'll need their quick-mount legs # RRRLT600.
  view full answer...
  
• What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?
  I have a great platform solution for you. Unfortunately, the Rhino-Rack Pioneer Platform 72" Long x 56" Wide RR42108BF is discontinued. However, with the recommended fit of the Rhino-Rack Pioneer Platform Rack for Short Camper Shells - Backbone - 60" Long x 56" Wide # RR63ZW, you will have both the platform and the mounting hardware available for installation with the modular Backbone. The Modular Backbone is designed to fit the track on the 100XR.
  view full answer...
• Will 59" Crossbars Work on a 2003 Chevrolet TrailBlazer EXT?
  Yes, they will Justin. The 59" Rhino-Rack Vortex Aero Crossbars item # RRVA150B-2 will attach to the roof of your 2003 Chevrolet TrailBlazer EXT using the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600. You are correct they are going to over hang quite a bit. The 46" Long Rhino-Rack Vortex Aero Crossbar item # RRVA118B are what's recommended for your Trailblazer. The Yakima ForkLift Roof Mounted Bike Carrier item # Y02098 will definitely work with Rhino-Rack crossbars....
  view full answer...
• Length of Rhino-Rack RT-Style Roof Rack Tracks RRRTS547 on 2017 Toyota Tacoma Double Cab
  The tracks included in the Rhino-Rack RT-Style Roof Rack kit # RRRTS547 (same as RTS547) are each 47" inches long. These are not the crossbars but the rivet-mount tracks that mount permanently to a vehicle or camper shell roof to allow installation of track-mount legs such as # RRRLT600. These legs in turn accept crossbars like # RRVA150B-2 which are 59-inches long; other lengths are available. It sounds like you may prefer a custom-fit cab roof rack rather than a general-purpose track-based...
  view full answer...
• Replacement Leg Tower and Foot for a Rhino Rack RTL600
  Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600 but I have a two pack item # RRRLT600H.
  view full answer...
• Best Roof Rack Options for a 2016 Land Rover Discovery/LR4
  Absolutely! A Land Rover Discovery is referred to as the Land Rover LR4 here in North America. This is not to be confused with the Land Rover Discovery Sport which is an entirely different vehicle altogether. The Discovery/LR4 came with two different roof options which were a bare roof and roof with factory installed tracks. If you have the factory installed track system then you can use the Rhino-Rack Vortex Aero Crossbar System which is composed of the the crossbars part # RRVA137B-2,...
  view full answer...
• Roof Rack Tracks & Basket That is Heavy Duty
  Hi Morris, While there isn't anything specific to your 2022 Roxor, there are rivet-mounted tracks you can add. I'm not sure the length you need, but the shortest available is the 36-1/4" long Rhino-Rack RT-Style Roof Rack Tracks # RRRTS540. Then you'd need a roof rack that fits the tracks, and for that you would add the Rhino-Rack Quick Mount Legs # RRRLT600. To complete the rack set up you'd need crossbars, with the right length depending on the width of your roof/cab enclosure. You...
  view full answer...
• Recommended Tonneau Cover and Bike Rack for a 2024 Ford Ranger
  Hey John, welcome back and thanks for the email! I was able to track down all of the parts in the pictures you provided and find the same model tonneau cover that fits your 2024 Ford Ranger XLT with a 5' bed. I have listed all of the parts below: Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover - Aluminum - Matte Black item # PE94NJ Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Is it Possible to Have a Single Crossbar on my Camper with Tracks and a Crossbar Mounted on My Cab?
  For having one 65-inch Rhino-Rack heavy Duty Crossbar on your camper shell's factory tracks and having one mounted on the cab of your 2018 Ford F-150, you need the following parts: For the single HD crossbar on the shell: - 65" Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1650B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 For the single...
  view full answer...
• Replacement Leg Tower and Foot for a Rhino Rack RTL600
  Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600 but I have a two pack item # RRRLT600H.
  view full answer...
• Feet Needed To Connect Rhino-Rack Crossbars To A Pace Edwards Ultragroove T-Slot
  Hey Chris, To connect your Rhino Rack crossbars to the t-slots of a Pace Edwards UltraGroove Retractable Hard Tonneau Cover # 311-KED7936 you'd need the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600H.
  view full answer...
• Parts Needed for Single 54" Rhino-Rack HD Crossbar for Track Mounting
  Hey Brian, thanks for reaching out! It sounds like you're needing the 54" Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375B, the Quick Mount Legs # RRRLT600H, and the Leg Spacer Blocks # RRQMHD05. This gets you the 54" Rhino-Rack HD crossbar with the parts needed to secure it to the tracks that install on a roof. Let me know if you're needing anything else!
  view full answer...
• Recommended Roof Rack for 2018 Mercedes-Benz Sprinter Factory Tracks
  We have a few systems that will fit the factory tracks on your 2018 Mercedes-Benz Sprinter. If you want the 2 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - 71" Long - Qty 2 # RRVA180B-2 Quick Mount Legs - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 Quick Mount Nuts - Factory Tracks - Qty 8 # RRQMFK11-2 Metal lock cores # RRVA-LEC4 If you want the 3 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71"...
  view full answer...
  
• Parts Needed to Add 3rd Crossbar to Rhino Rack Aero Bar Roof Rack for Camper Shells
  The overall height of the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B is 5" tall. If you're looking to add a 3rd crossbar to the tracks on the # Y02-480B and not the cab you'll want to use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H and the Rhino-Rack Vortex Aero Crossbar - Aluminum - Black - 54" Long # RRVA137B.
  view full answer...
  
• Will the Rhino Rack Quick Mount Legs Work With Thule Top Tracks
  Yes, the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600H will work with the Thule tracks you have coming on your LEER camper shell. Since you mentioned you wanted to use the 65" Rhino Rack crossbars, I'd recommend using the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT which comes with the 65" bars as well as all the feet you'll need as well.
  view full answer...
• Recommended Track Roof Rack Installation on an A.R.E MX Cap on 8 Foot Truck Bed for 2 Kayaks
  For your A.R.E. MX cap, I recommend the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 81" Long - Qty 2 # RRRTV208 which you can cut to length if you desire. For your system due to the length, I recommend you go with 3 crossbars to cover that spread. To do this, I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and add the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty...
  view full answer...
  
• 2017 Jeep Wrangler Unlimited Hard Top Parts for Rhino-Rack Pioneer Platform Rack
  For your application I recommend the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System # RR28FM. This comes with 3 sets of the quick-release mounting kit for the hard top on your 2017 Jeep Wrangler Unlimited. If you're only looking for the quick-release legs then you'll need the Kit # RRRLT600 for 4 legs as well as kit # RRRLT600H for 2 legs which is what you need for the longer 72" Long x 56" Wide Pioneer Platform Rack. If you have a different Pioneer Platform Rack let...
  view full answer...
  
• Recommended Rhino-Rack Pioneer Platform for a 2005 Ford Excursion
  I have a solution for you but Rhino-Rack's Pioneer Platforms like item # RR78AB and Yakima's feet are not compatible. Instead, to do what you're wanting you will have to remove the Yakima set up and use the following parts on your 2005 Ford Excursion's roof tracks: Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600H
  view full answer...
• How to Carry Bikes in Truck Bed with Retrax XR Tonneau Cover Installed
  I got you. You can use the 65" Rhino-Rack Vortex Crossbar # RRVA165B with the Quick Mount Legs # RRRLT600H for a single crossbar on your Retrax XR tonneau cover or the kit # RRVA165B-RRRLT600 for 2 crossbars (if you ever think you'll need a second one in the future). Once you have this in place you can use the RockyMounts LoBall Bike Rack # RKY1097 which mounts via the T-Slots in the Rhino-Rack crossbar so that the forks of your bike will be sitting above that tonneau cover canister so...
  view full answer...
• Rhino Rack Pioneer Platform that Fits 2018 Jeep Wrangler Unlimited
  The mounting kit needed to fit a Rhino Rack Pioneer Platform to the roof of a 2018 Jeep Wrangler Unlimited is the part # RRRJLB1 which you could potentially be used with the smaller Pioneer Platform # JA8688 but you are going to end up having to get the # RRQMHD05, the leg kit # RRRLT600 and the # RRRLT600H. I'd go with the larger # JB0893 though as it will fit and is the most cost effective solution. The picture I attached shows what the # JB0893 looks like installed.
  view full answer...
  
• Will Rhino Rack Mounting Legs Work w/ Thule Aero Bars?
  No, the Rhino-Rack Quick Mount Legs item # RRRLT600H don't work with Thule crossbars or anything else that isn't Rhino-Rack. If you would like me to find a set of mounting legs that will work with your Thule Aero bars I would just need to know the year, make, and model of your vehicle and whether or not it is equipped with roof rails. Feel free to email me directly or comment below. Hope to hear from you!
  view full answer...
• Potential Roof Rack Option For 2006 Roadtrek 170
  Certainly nothing that is any type of custom fit but you might be able to use something that mounts to tracks such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long # RRRTV168. Then you'd need the right crossbar length to go with Legs # RRRLT600H. I'm not sure what your roof measures so I've added a link below to our selection of tracks and you can filter through them by size.
  view full answer...
• Parts Needed to Install 84" x 49" Pioneer Platform Rack on a 2022 Ford F-450 Super Duty
  To install the 84"x49" Rhino-Rack Pioneer Platform Roof Tray # RR25TB on your 2022 Ford F-450 truck topper (since it will be too long to mount to the roof of your vehicle) you'll need the following: - Pioneer Platform Roof Tray # RR25TB - Quick Mount Legs # RRRLT600 AND # RRRLT600H - 63" Long RTC-Style Roof Rack Tracks # RTC16 This gives you a track for your truck topper, and then 3 pairs of Quick Mount Legs to give the extra long rack better stability.
  view full answer...
• Does Weight Rating Increase for 3 Bars on the Rhino-Rack Aero Bar Roof Rack for Camper Shells
  According to Rhino-Rack the max weight rating for their Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B is 220 lbs (dynamic) even if you add a 3rd crossbar. So while your topper will have a higher weight rating you'll be limited by the lower rating of this roof rack. If you still want to add a 3rd crossbar you can do so with the 54" Vortex Crossbar # RRVA137B with the Quick Mount Legs # RRRLT600H.
  view full answer...
• Recommended Crossbars for a 2020 Ford Ranger w/ a RetraxPRO XR Tonneau Cover
  I have a solution for you but our next size down kit is going to be the 65" Rhino-Rack Vortex Crossbars for Retrax XR Tonnneau Covers item # RRVA165B-RRRLT600 but this is still too wide. From what I could find online the bed of a 2020 Ranger measures 72.8" L x 44.8" W x 20.8" T. With this in mind, I recommend buying two sets of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600H and using the 49" long Rhino-Rack Vortex Aero Crossbars item # RRVA126B-2. The Quick...
  view full answer...
• Rhino Rack Legs Compatible With Yakima Track System
  The Rhino-Rack RLCP Leg Kit for OEM Fixed Mounting Points - Pad Mount - Qty 6 RLCP02 are not compatible with the Yakima Track System, however, I do have a fit. The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and if you want 6 total add the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H. To make this compatible you will also need the Adapter Kit for Rhino-Rack RTL600 Legs...
  view full answer...
• Will Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars Work With Rhino-Rack RTC Tracks
  Yes, the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600H will work with the Rhino-Rack RTC-Style Roof Rack Tracks like part # RTC14.
  view full answer...
• Can I Purchase the Rhino-Rack Crossbar System Without the Tracks?
  Yes, you can purchase just the Rhino-Rack legs and the crossbars without the tracks. For the legs, you need 2 sets of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600H. For the black 54" Rhino-Rack crossbars, you need the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2. The Rhino-Rack legs will fit onto Thule tracks on your Leer camper shell.
  view full answer...
• Rhino-Rack Leg Kit That Comes with the Crossbar System for Retrax XR Series Tonneau Covers
  The Rhino-Rack Quick Mount Legs # RRRLT600H are the same legs that come with the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers # RRVA165B-RRRLT600. So if you wanted to add a 3rd crossbar you could use those legs and another 65" Black Vortex Crossbar # RRVA165B. The "fit kit" part of the legs all come with covers no matter which leg kit you get.
  view full answer...
• Rhinorack Backbone for 2018 wrangler JL With 3 Vortex Crossbars
  To use the Rhino-Rack Backbone part # RRRJLB1 with 3 Vortex Crossbars on the 2018 Jeep JL Wrangler you will need part # RRRLT600H with part # RRRLT600, 3 sets of spacers part # RRQMVA05, part # RRQMFK05 for the rubber bases and part # RRVA150B-3 for the three bars.
  view full answer...
• Heavy-Duty Roof Rack with 3 Crossbars for Solar Panels on 2020 Mercedes-Benz Sprinter 2500
  For your 2020 Mercedes-Benz Sprinter 2500 with the standard roof and track system I recommend using the Rhino-Rack HD roof rack system which consists of the following: 71" HD Bars - # RB1800B-3 4-Pack Legs - # RRRLT600 2-Pack Legs - # RRRLT600H Quick Mount Nuts - # RRQMFK11-3 Leg Spacers for HD Bars - # RRQMHD05-3 Please note that the Channel Nuts in RLT600 must be swapped out and the larger, N035A track nut, must be used in the track. The HD Bars have a C-Channel in the top that also...
  view full answer...
• Roof Rack for 2022 Ford F-150 SuperCrew Cab Roof and A.R.E. Camper Shell
  Hi Tim; if you put one crossbar on the roof and one on the truck cap it might look a little funny but it is doable. Also, you will probably end up with bars at different heights since one is attaching to the tracks with different legs compared to the clamp on style on the roof of your cab. The Rhino-Rack Sportz Roof Rack for Naked Roofs # RR43HG will work on your F-150 and the Rhino-Rack Roof Rack for Factory Tracks # Y02-480B-NT will fit the A.R.E truck cap tracks. It is also worth noting...
  view full answer...
• How to Install the Batwing and Foxwing Awning Relocation Kit
  Here are the 2 different mounting options for installing the Batwing and Foxwing Awning Relocation Kit # RR31102. You can change the orientation of the brackets so that the awning will either hang higher or lower depending on your application.
  view full answer...
  
• Recommended Roof Rack for 2018 Mercedes-Benz Sprinter Factory Tracks
  We have a few systems that will fit the factory tracks on your 2018 Mercedes-Benz Sprinter. If you want the 2 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - 71" Long - Qty 2 # RRVA180B-2 Quick Mount Legs - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 Quick Mount Nuts - Factory Tracks - Qty 8 # RRQMFK11-2 Metal lock cores # RRVA-LEC4 If you want the 3 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71"...
  view full answer...
  
• Heavy-Duty Roof Rack with 3 Crossbars for Solar Panels on 2020 Mercedes-Benz Sprinter 2500
  For your 2020 Mercedes-Benz Sprinter 2500 with the standard roof and track system I recommend using the Rhino-Rack HD roof rack system which consists of the following: 71" HD Bars - # RB1800B-3 4-Pack Legs - # RRRLT600 2-Pack Legs - # RRRLT600H Quick Mount Nuts - # RRQMFK11-3 Leg Spacers for HD Bars - # RRQMHD05-3 Please note that the Channel Nuts in RLT600 must be swapped out and the larger, N035A track nut, must be used in the track. The HD Bars have a C-Channel in the top that also...
  view full answer...
• Recommended Roof Rack With 3 Bars For A 2022 Mercedes-Benz Sprinter 2500 With High Roof
  To get the Yakima LockNLoad # Y05049-39 installed on your 2022 Mercedes-Benz Sprinter 2500 with the high roof, you will need the Rhino Rack Vortex Aero Crossbars # RRVA180B-3, Quick Mount Legs # RRRLT600 and # RRRLT600H, Quick Mount Nuts # RRQMFK11-3, and Roof Rack Leg Spacer Blocks # RRQMHD05-3. This will will give you 3 crossbars as well as everything needed to get the roof rack installed. This will also give you 220 pound capacity once installed. Weird potential add on, but with how...
  view full answer...
• Will RCL Legs Fit Rhino-Rack Backbone Roof Rack Mounting System
  Hi Andrew; the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 and the RCL Legs # RRRCL6 are compatible. The spacers # RRQMHD05-3 act as an adapter since the HD bars won't fit as is. If you're fabricating your own crossbars it will be up to you to figure out how to mount them.
  view full answer...
• Recommended Roof Rack for 2018 Mercedes-Benz Sprinter Factory Tracks
  We have a few systems that will fit the factory tracks on your 2018 Mercedes-Benz Sprinter. If you want the 2 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - 71" Long - Qty 2 # RRVA180B-2 Quick Mount Legs - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 Quick Mount Nuts - Factory Tracks - Qty 8 # RRQMFK11-2 Metal lock cores # RRVA-LEC4 If you want the 3 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71"...
  view full answer...
  
• Recommended Heavy Duty Roof Rack System And Kayak Carrier For A 2022 Jeep Wrangler Sahara Unlimited
  For a heavy duty roof rack system for your 2022 Jeep Wrangler Sahara Unlimited I recommend the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 3 # RB1500B-3 RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 6 # RRRCL6 Rhino-Rack Backbone Roof Rack Mounting System # RRRJLB1 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick - Qty 6 # RRQMHD05-3 This roof rack system is going to come with...
  view full answer...
• Heavy-Duty Roof Rack with 3 Crossbars for Solar Panels on 2020 Mercedes-Benz Sprinter 2500
  For your 2020 Mercedes-Benz Sprinter 2500 with the standard roof and track system I recommend using the Rhino-Rack HD roof rack system which consists of the following: 71" HD Bars - # RB1800B-3 4-Pack Legs - # RRRLT600 2-Pack Legs - # RRRLT600H Quick Mount Nuts - # RRQMFK11-3 Leg Spacers for HD Bars - # RRQMHD05-3 Please note that the Channel Nuts in RLT600 must be swapped out and the larger, N035A track nut, must be used in the track. The HD Bars have a C-Channel in the top that also...
  view full answer...
• Recommended Roof Rack With 3 Bars For A 2022 Mercedes-Benz Sprinter 2500 With High Roof
  To get the Yakima LockNLoad # Y05049-39 installed on your 2022 Mercedes-Benz Sprinter 2500 with the high roof, you will need the Rhino Rack Vortex Aero Crossbars # RRVA180B-3, Quick Mount Legs # RRRLT600 and # RRRLT600H, Quick Mount Nuts # RRQMFK11-3, and Roof Rack Leg Spacer Blocks # RRQMHD05-3. This will will give you 3 crossbars as well as everything needed to get the roof rack installed. This will also give you 220 pound capacity once installed. Weird potential add on, but with how...
  view full answer...

Do you have a question about this Roof Rack?