Parts Needed to Add 3rd Crossbar to Rhino Rack Aero Bar Roof Rack for Camper Shells

Question

Question:

Aero bar roof rack overall net height from shell to top of cross bar. I want to purchase an additional cross bar to mount to cab, and be the same height.

asked by: Kevin

1

Helpful Expert Reply:

The overall height of the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B is 5" tall.

If you're looking to add a 3rd crossbar to the tracks on the # Y02-480B and not the cab you'll want to use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H and the Rhino-Rack Vortex Aero Crossbar - Aluminum - Black - 54" Long # RRVA137B.

expert reply by: Erik B

1

Height of Rhino Rack track mounted roof rack
(click to enlarge)

Answer 1

Based on your bed length and camper shell type the Rhino Rack Camper Shell Roof Rack setup part #Y02-480B would work but there's a chance you might need to trim down the tracks as they are right at 5-1/4 feet in length. There is no difference…

view full answer...

Answer 2

I have a great solution for a Rhino Roof rack on your new Leer 180 shell and an attachment for hauling a canoe. I recommend the Rhino-Rack Aero Bar Roof Rack for Camper Shells item #Y02-480B. They have a weight capacity of 220 lbs, track length of…

view full answer...

Answer 3

Your vehicle requires a converter to convert the trucks 5-Wire system down to the 4-Wire system used on trailers. You will find a connection point behind the rear bumper on the passenger side frame rail, that you will use to plug in the Plug-N-Tow…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Yeah, that things fun with camper shells. I've got exactly what you need though Lauren. If your Leer XR camper shell does not have tracks installed, I recommend the Rhino-Rack Heavy-Duty Roof Rack for Camper Shells item #Y01-120B with 54"…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Parts Needed to Add 3rd Crossbar to Rhino Rack Aero Bar Roof Rack for Camper Shells

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching