RV Bumper 2" Trailer Hitch Receiver - Clamp-On
(123 reviews)
Price: $66.01
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (123)
- Q & A (0)
- Photos
Swagman RV and Camper Hitch - S64025
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 4-1/2 x 4-1/2 Inch Bumper
- 4-1/4 x 4-1/4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- Swagman
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.
Features:
- 2" Hitch receiver opening to accommodate hitch accessories
- Solid steel construction
- Powder coated to resist corrosion
- For use with up to a 4-bike non-folding, standard bike rack
- Not to be used for towing or with cargo carriers
- For use above the bumper only
- Never exceed the bumper's stated capacities
- Attaches to bumper using 4" bolts (included)
Specs:
- Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers
- Not for use on aluminum or spot-welded bumpers
- Load capacity: 200 lbs
- Distance from the center of hitch pin hole to end of receiver: 3"
- Mounting plate measures 6" x 6"
Note: Not to be used with an adapter or extender.
64025 RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Alternate product found
Customer Reviews
RV Bumper 2" Trailer Hitch Receiver - Clamp-On - S64025
Average Customer Rating: 4.8 out of 5 stars (123 Customer Reviews)
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.by: Clark C09/07/2022
Hold up well after 160 miles camping trip. Mounted at 4” rear bumper of my camping trailer to accomodate 2 bike rack. I only carry 1 bike for the trip. Solid and well secured using provision screw that you need to tightened once bike rack is mounted to avoid movement when driving.
by: Jimbo09/01/2014
Very pleased with this product it's robust and solid, the bolts and lock nuts are high quality. Ordering and shipping were easy and fast. The part fit perfectly I used some gasket material to protect the bumper, would have liked to have the torque specs on the nuts. I use a Thule bicycle rack and this hitch allows me to bring along the bikes on my 5th wheel.
by: George 02/12/2024
Very happy with the item. Well-made, and fits my RV bumper.
by: Lazy Creeks06/30/2018
Great vendor, great product.
We have 6 trailers at our home; 2 boat, 1 tandem utility, 3 single axle utility that need to be moved around frequently for space reasons.
Airports need to "push back" planes from their gates for which the "tugs" have hitches on their front bumpers. That arrangement allows greater steering control than if their hitches were mounted on the rear of the "tugs". So, I've mounted this wonderful hitch to the front bumper of my '86 Isuzu Trooper II 4-wheel drive which I use to position my trailers. Of course it's NOT safe for highway travel, but as a positioning aid, it is superb. Also; etrailer communications and speed of delivery cannot be improved. Don't change anything, etrailer.
by: Kevin 06/17/2020
I'm using this to mount a pretty large and heavy 4-bike rack to the rear bumper of my camper. This thing is stout. It has nylock nuts so I don't have to worry about the nuts backing off. Also has a threaded bolt hold in the side w/ bolt so that you can snug up whatever you put in the receiver (bike rack, etc.) to keep it from swaying. I really like that feature.
by: John 06/09/2020
Luck was on your side for a nice piece of furniture for my trailer. The package arrived ok but when I went to open it -- I had no trouble. The shipping expert had forgotten to tape the box on the lid!!! Thankfully because the connector was tightly packed, it did not fall our and break someones foot or get lost and thrown in the trash.
John
6/11/2021
Like it is supppose to!
by: Michael J04/23/2014
Opened the box and was immediately impressed by the construction quality of this bike rack receiver. Easily installed on the bumper of our trailer and again, I was very impressed with the sturdy bolts, back plate and receiver. Too bad Swagman doesn't make one of these for my inferior spare tire holder.
Michael J.
4/23/2015
This is a great product, period! Perfect match for my 4 trailer bumper and my bike rack. But more importantly is the quality service I receive from etrailer. They are a great source for everything you could possibly need for your trailer or RV. Ive ordered several items from them and the quality is always 5 Star! Cannot say enough good things about their customer service. They are 5 Star from top to bottom. They set the standard for customer service and products.
by: John M.08/05/2015
The RV Bumper Hitch Receiver is of great quality and is easily installed. I used it to mount to my trailer steel bumper so I can carry my bikes which mount on a receiver type rack.
John M.
8/16/2016
All three of these products have held up well and performed well. Thanks.
by: Patricia09/18/2018
Swagman hitch fits securely on our 4” trailer bumper. Our standard bike rack works fine on the hitch. I have had several campers ask me where I got the bumper hitch and have recommended etrailer for their solid customer service
by: Jim S.03/17/2017
The Swagman RV Bumper 2" Trailer Hitch receiver is a very solid hitch receiver especially for the Swagman Dispatch 2 Bike Platform Rack - 2". Along with the threaded pin from the bike rack and the set bolt on this receiver there is no play or movement in the receiver tube. My bumper is 4" square and will require spacers on the back side to fully secure, minor issue.
by: Glenn03/12/2018
Etrailer service is always top notch with fast shipping. They are my go-to whenever I need parts or service items on my RV's trailers or truck.
About this hitch. Easy to install & does the job. Needed it to carry bikes on the back of our travel trailer. Due to ground clearance as you leave some gas stations, I would not mount it below the bumper you may drag the bikes on the ground. In fact they say not to bolt it underneath the bumper due to the limits of the bolt strength. So for what it is intended for, it's a great solution.
by: Mike07/06/2016
Purchased to fit on my RV bumper for bike rack/cargo carrier. Installation is as basic as you can get. I was surprised that the bolts were grade 8, but there were no washers. See no reason why it won't work very well.
by: Jay W.12/06/2017
RV Bumper Hitch attachment: Works perfect! I use two, one on each end of the bumper to attach flag pole holders. Have already had comments about the product and the professionalism of the staff and the quick mailing was impressive!
Installation was simply bolting the product onto the bumper, how easy is that!!??
No more use of U-Bolts and or having to weld pipe onto the RV in order to flag my NASCAR flags at the track(s).
Do not be doubtful of this product!! Get yourself one or two!! Thanks etrailer!!
by: Charles M05/18/2018
I ordered the Swagman RV hitch s64025. Upon receiving the hitch early Wednesday afternoon, I opened the box and noticed that the bottom plate was missing. I immediately called etrailer and spoke with Crystal. She was sympathetic and totally understanding of my situation. She immediately placed an order for a replacement. I received the replacement hitch early Friday afternoon. I'm just waiting for instructions to return the old hitch. The original box may have been opened somewhere during shipment--I can't be sure. However, I would not hesitate ordering anything from etrailer. I ordered other items as well and they all arrived on-time and in good condition. A big Thank you Crystal, and I would be remiss if I didn't thank Reesa, and Tiffany for their help in placing other orders. This is what I call a Five-Star customer oriented company--nothing short of OUTSTANDING!!!
by: Tom A.10/11/2014
I installed this item to mount the Prorack 2 bike rack on the bumper of our new trailer so that we could conveniently carry 2 lounge chairs. It was nicely fabricated and finished, and installed easily with the hardware included. I'd have given it an "excellent" rating, but I'm not sure that there won't be some future corrosion issues with the bolts provided due to the type of surface treatment. However - with this stated - I'd definitely consider purchasing this item again to meet a similar need in the future.
by: Don S.03/06/2017
This clamp on hitch receiver arrived in only a couple of days although I live in Southern Ontario Canada. The finish and welding on this product are excellent. I will use it for attaching a bike rack to the rear bumper of our new travel trailer. I purchased the bike rack some months ago from etrailer. That was also very good customer service experience.
by: Andrew 09/03/2020
Good product, reasonable price, easy to find on etrailer. Just what was needed to add a bike rack on the rear bumper of our travel trailer. Just as advertised, works fine, seems strong enough - though time will tell. Arrived in good time, as predicted.
by: Mark 09/08/2022
Had it for a year now it’s holding up perfectly, still looks like new. I use it for my bike rack and it works great.
by: Doug 09/22/2022
Works great on travel trailer tube bumper. As cheap to buy rather than making it
by: Dave 05/14/2020
Just right to add a bike rack, not load rated to add a trailer.
Would prefer locking nuts, but easy to find at hardware store.
by: Fred B.06/20/2016
Perfect for my new RV. I like the all black finish, bolts included, that goes well with the black bumper. It will be used for a two bike carrier and looks to be rugged enough, I'm sure it is, and time will tell. I think it will be great.
by: Gareth M02/21/2017
This hitch was the perfect way to mount my bicycle rack to the rear of my trailer. We have used it several times in the last year with no problems. It was easy to install.
by: Elwood07/25/2015
Received the product and installed it today - easy installation. I have another hitch receiver that I bought years ago, but it's at our home in Florida and we're currently in Ohio. This one is much better quality, but also cost over twice as much. While we won't be leaving to head home for a month, I foresee no issues with this receiver handling the bike rack and two bikes.
by: Charles S.12/06/2015
Bolt-on 2" receiver for bike rack on RV bumper. Wow! Excellent quality, super construction, welds & finish, easy install. AND fast delivery. Thank you etrailer!!
by: Jeremy06/01/2020
Been using this for a year on our camper bumper for bike rack. So far so good!
25
123
Show More Reviews
See what our Experts say about this Swagman RV and Camper Hitch
- Can the Swagman Platform-Style Bike Carrier # S64663 Hold a 26 Inch or a 29 Inch Bike WheelThe Swagman Platform-Style 2 Bike Carrier, # S64663, will handle most 26 inch and 29 inch bike wheels. To verify if this bike rack will hold your bikes, I recommend measuring the wheel base of your bikes. The wheel base is measured from axle to axle on the bike. This bike rack can handle wheel bases up to 52 inches long. It also has a weight capacity of 40 lbs per bike and the wheel loops will fit wheels up to 3-1/2 inches wide. I have attached the installation instructions for you to...
view full answer... - Recommendation for a Trailer Hitch that Mounts to a Bumper Pull HitchIt sounds like you are describing a bumper hitch with a ball. What you can do is remove the ball and install Curt Bumper Hitch, # E-3S. This will provide a 2 inch trailer hitch receiver that you can use with a hitch mounted bike rack. I have included a link to the installation details for the hitch. If you have an RV or trailer that has a 4 inch square channel bumper, you could use RV Bumper Trailer Hitch Receiver, # E-100. Or, if it is a 4 inch square continuous welded steel bumper, you...
view full answer... - Can the Roadmaster Dual Hitch Receiver Be Used to Tow a Trailer and Carry Bike On a Bike RackThe Roadmaster Dual Hitch Receivers, like the # RM-077-4 that you referenced, are not designed for use with any type of trailer. They are designed for use with tow bars only. I recommend installing a hitch on the back of your RV. If your RV has a 4 x 4 inch continuous-welded steel bumper, you could use the RV Bumper 2 inch Trailer Hitch Receiver, item # S64025, along with a bike rack that is designed for use behind an RV. The Swagman Dispatch Bike Rack, item # S44FR, would be a good choice. If...
view full answer... - Carrying Bikes on Travel Trailer Using Swagman Universal RV Bumper HitchIf your trailer has a continuously welded steel square bumper of up to 4 inches wide then this hitch can be mounted to it as long as your bumper is rated for a hitch. For carrying bikes you will have to consult your RV dealer to find out the tongue weight rating for your trailers bumper. The Swagman RV Bumper Hitch you referred to is rated for up to 200 pounds but you can not exceed the weight rating for your bumper. Many of the bike racks state that they are not to be used behind travel...
view full answer... - Trailer Hitch Recommendation for a Camper TrailerThe Swagman trailer hitch # S64025 us designed exclusively for 4 inch x 4 inch continuous-welded steel bumpers and is not compatible with aluminum or spot-welded steel bumpers. We do not have a bumper hitch that will fit a 3 inch square bumper but you may be able to install a frame mount hitch. The most versatile frame mount hitch is # 13703. It fits box frames, I-beam frames, and C-channel frames. It can be bolted on or welded on but welding should be done by a qualified professional....
view full answer... - Recommended RV Bumper Hitch to Transport Firewood It sounds like you are referring to the RV Bumper 2 Inch Trailer Hitch Receiver # S64025. This particular bumper hitch is designed to be used with hitch-mounted bike racks and is not recommended for use with a cargo carrier, as the weight that they will provide is simply too much for the unit to handle. A better option for your application will be with the Curt RV Bumper Trailer Hitch Receiver # E-100. This is intended for 4 inch square channel bumpers and can be used with hitch-mounted...
view full answer... - Recommendation for Transporting 3 Bikes with Forest River Flagstaff with Spare Tire I do have an option for you, however none of our traditional spare tire mount bike racks including the Malone # MPG2148 and the Hollywood Racks # HRSR1 that you were looking at are rated for use by the manufacturer to be used at the back of a trailer. This is simply because the manufacturer has deemed that they aren't fully capable of handling the extra movement and bounce that they would need to withstand in this application. The best option we have available is with the Swagman Around...
view full answer... - Availability of RV Bumper Trailer Hitch Receiver and Bike RackAny of our RV and motor home bike racks, see link, with a 2 inch shank will work with the RV Bumper 2 inch Trailer Hitch Receiver with Anti-Rattle - Clamp-On, part # S64025. Please be aware that the springs on a camper are very different than those on a vehicle, and the bikes will be jarred quite a bit. No matter which bike rack you choose, you will need to be sure to secure the bikes with bungees to prevent damage to the bikes, rack, or your camper.
view full answer... - Swagman RV Bumper Trailer Hitch Receiver Fit And CompatibilityThe RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 is designed for the standard 4 inch RV bumper, but it will fit 4 inch to 4.5 inch continuous welded steel bumpers. The mounting plate measures 6 x 6 inches. This hitch receiver is not to be used with adapters or extenders.
view full answer... - Spare Tire Holder for 4-1/4 Inch Bumper on 1984 Fleetwood Prowler CamperStromberg Carlson offers a spare tire carrier that is compatible with a 4-1/4 inch square bumper, part # TR-2. According to my Stromberg Carlson rep, the carrier is compatible with a 5 lug 4-1/2 inch bolt circle.
view full answer... - Mallard Camp Trailer Hitch Receiver Recommendation for 300 lb Tongue WeightThe RV Bumper 2" Trailer Hitch Receiver # S64025 is what we have to fit your 4-1/4" x 4-1/4" bumper. The only problem is this is limited to a 200 lb tongue weight rating. If you want something with a higher tongue weight rating we need to go a different route like with a frame mount hitch receiver. A popular option is the Curt Adjustable Width Hitch Receiver # C13704. This is a bolt-on application and fits trailers that have a 22" - 66" wide frame. This has a higher tongue weight rating...
view full answer... - Why Wont the Hollywood Racks Sport Rider Bike Racks Work On a 5th Wheel TrailerThe Hollywood Racks Sport Rider Bike Racks are indeed not rated for use on a fifth wheel trailer as is the case with many bike racks due to the decreased ride quality at the back of the trailer. Instead, you'll need to use the Hollywood Racks RV Rider Bike Platform Rack part # HLY64FR which is built much stronger. In regards to a bumper hitch, most are either for a 4" x 4" or 4-1/2" x 4-1/2" as these are the standard sizes. That said, the RV Bumper 2" Trailer Hitch Receiver part # S64025...
view full answer... - Will the # 64025 Swagman RV 2 inch Receiver Bumper Mount Adapter Mount Underneath the RV BumperOne option we have for mounting a receiver under the bumper of your RV is the RV Bumper 2 inch Trailer Hitch Receiver, item # E-100. The only problem I see with the location you are suggesting is the distance from the bottom of the receiver to the road surface. If there is not enough clearance the clamp on hitch, bike rack shank or bikes themselves may make contact with the road and damage one or all of the components including the RV bumper. I spoke with my contact at Swagman and was...
view full answer... - Bumper Mounted Hitch Recommendation to Tow a Small Trailer and a Golf CartThe main purpose of the Swagman Bumper Mount Adapter, # S64025, is to carry a bike rack behind your RV and it should not be used for towing. Instead, I would recommend installing a universal RV trailer hitch like the Curt Adjustable Trailer Hitch, # 13703, if you are looking for a hitch for an RV. This hitch will fit frames 22 inches to 72 inches wide and it has a 3,500 lb towing capacity and a 350 lb tongue weight capacity. For a bumper mounted receiver, you can look at the Curt Bumper...
view full answer... - Do You Carry a Swagan Clamp-On or Bolt-On RV/Camper Bumper HitchYes, the RV Clamp-On Bumper Hitch is available by itself. It is part # S64025 and I have added a link to it below. Remember, your bumper needs to be a 4x4 inch continuous-weld steel bumper. It cannot be used on spot welded or aluminum camper bumpers.
view full answer... - RV Bumper Mounted Trailer Hitch that has the Receiver On Top of the BumperI can only recommend installing Curt hitch # E-100 according to the instructions which show it positioned with the receiver on the bottom. If you want to use a hitch for an accessory and not for towing then there are other options that place the receiver on top such as # S64025 which is rated for 200 pounds or # UF35-946402 rated for 350 pounds.
view full answer... - Hitch Option Recommendation for Travel Trailer with Aluminum BumperWe do not have any hitches we can recommend that will fit around an aluminum RV bumper. Best option we'd have would be a multi-fit hitch like part # 13703 which fits frame widths of 22 to 72 inches and all frame styles.
view full answer... - RV Bumper Hitch Recommendation that Can Mount Below Bumper I have a solution for you, but the RV Bumper 2" Trailer Hitch Receiver # S64025 that you referenced can only be used with the hitch opening on top of the bumper. Instead you would want the Ultra-Fab 2" Motor Home Trailer Hitch # UF35-946401. This hitch can be used with the opening on the bottom of the bumper. Be sure not to exceed the weight capacity of your bumper, check the owners manual of your vehicle for more info on that.
view full answer... - RV Bumper Hitch Recommendation Where the Hitch Opening is Below BumperI have a solution for you, but the RV Bumper 2" Trailer Hitch Receiver # S64025 that you referenced can only be used with the hitch opening on top of the bumper. Instead you would want the Ultra-Fab 2" Motor Home Trailer Hitch # UF35-946401. This hitch can be used with the opening on the bottom of the bumper. Be sure not to exceed the weight capacity of your bumper, check the owners manual of your vehicle for more info on that.
view full answer... - Hitch Recommendation for a 2016 Keystone Passport 217EXPThe most common recommendation we make for travel trailers like yours is a multi-fit hitch like the part # 13703. As long as your frame rails are between 22 and 72 inches apart this hitch would fit and work well for you. I attached an install video for you to check out for this hitch as well.
view full answer... - Swagman Platform Bike Rack Recommendation for Use Behind an RVThe Swagman XTC2 Bike Rack part # S64670 is a great rack, the only problem is that it is not designed to work at the back of an RV or trailer. The ride quality at the back of an RV is much rougher than the back of a passenger vehicle. Because of this only certain racks have been designed to work there. For a similar rack that would work at the back of an RV (and actually this comes with the # S64025) you would want the Swagman Platform-Style 2 Bike Rack # S64663. This rack has been confirmed...
view full answer... - Dual Hitch Receiver to Tow Trailer and Carry Bike RackOur Dual Hitch Receivers are not designed for use with any type of trailer. They are designed for use with tow bars only. I recommend installing a hitch on the back of your RV. If your RV has a 4 x 4 inch continuous-welded steel bumper, you could use the RV Bumper 2 inch Trailer Hitch Receiver, # S64025, along with a bike rack that is designed for use behind an RV. The Swagman Original 3 Bike Rack, # S64152-2, is a good choice. If your bumper is not a continuous welded steel bumper, you...
view full answer... - Trailer Hitch Recommendation for a 2005 Savoy SL Travel TrailerWhat I recommend for a bumper mount hitch is to go with # BA-100 which fits 4 x 4-1/2 inch bumpers. However, use a bumper mount hitch only if it is a square continuous welded steel bumper. If the bumper is not square, not continuously welded, and/or not steel, I recommend using a frame mount hitch. The most popular frame mount hitch that fits the widest variety of frames is # 13703. It fits box frames, C-channel frames, and I-beam frames. It can be welded on or bolted on. Welding should...
view full answer... - Altering/Reinforcing Rear Bumper of Nomad 23 Foot Travel Trailer for Receiver to Carry Bike RackThe Swagman RV Bumper Receiver you mentioned, part # S64025 is designed for a 4 inch square continuously welded steel tube bumper. I couldn't say what you're bumper is constructed of, but you could easily determine if the bumper is steel by sticking a magnet on it. If the magnet sticks, the bumper is steel. If it doesn't, it's likely aluminum. It is theoretically possible that you could alter your existing bumper to 'provide support' but it would have an unknown effect on the weight capacity...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Video Edited:
Zach D
Video Edited:
Jonathan Y
Updated by:
Adele M
Updated by:
Matthew S
Updated by:
Jenny M
Installed by:
Cole B
Installed by:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kevin
6/18/2021
The receiver itself is great. I still have it on my camper. My campers bumper on the other hand was not up to the task of stress that a fully loaded 4-bike rack put on it. The bumper could probably handle 1 or 2 bikes just fine but the rack I have puts too large of a moment on the thin wall square tube bumper.