Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers
(393 reviews)
Price: $61.99
In Stock
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers
Item # UF35-946401
Retail:$68.27
Our Price: $61.99
You Save: 9%
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (393)
- Q & A (0)
- Photos
Ultra-Fab Products RV and Camper Hitch - UF35-946401
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- Ultra-Fab Products
Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.
Features:
- Supplies a receiver opening at the rear of your motor home for hitch-mounted accessories like bike racks and cargo carriers
- Do not use for towing
- Bolts to the top of your RV's bumper
- Zinc-plated hardware included
- Sturdy steel construction
- Includes anti-rattle bolts for accessory receiver
Specs:
- Application: 4" x 4" RV bumper
- Receiver opening: 2" x 2"
- Plate measures 6" x 5"
- Bolt pattern: 5" on center x 4" on center
- Weight capacity: 100 lbs
- Do not exceed weight rating of your bumper
- 1-Year warranty
Notes:
- For use with hitch-mounted, RV-approved accessories only. Not rated for towing.
- Not for use on decorative aluminum bumper covers.
35-946401 UltraFab RV Bumper Receiver Adapter
Installation Details
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - UF35-946401
Average Customer Rating: 4.7 out of 5 stars (393 Customer Reviews)
Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.by: David 05/08/2024
On the rear bumper of my travel trailer it has carried 2 non-electric mountain bikes using a Swagman bike rack for 10,000 highway miles with no issues. I shimmed the receiver channel and drilled and safety wired the slop bolts. So far so good and I don't fore see any future issues as I haven't had to mess with it since installation..
by: Richard03/03/2024
It fit the bumper perfectly but my bike rack wouldn't fit without reworking it.
by: Bob R. PSL, FL10/03/2014
I ordered and received two of these hitch receivers and installed them on the rear bumper of my camper to carry my 150 cc scooter. Shipping was great and parts mounted without any problem. All hardware was included and fits perfect. Have purchased other items from etrailer previously and look forward to additional items in the future. This company is great to deal with.
Bob.r
8/28/2015
No problems at all. Used it several times already and works great. I mounted them at the frame extensions.
by: Pat02/01/2019
I’m using this receiver a little differently than it’s intended purpose. After getting some longer bolts and drilling holes in some aluminum angle stock, I mounted it to the tongue of our trailer. Now I have a place to store the head of our weight distribution hitch when it’s not on the truck. I just slide it into this receiver and it’s up, out of the way instead of taking up room in a storage compartment or sitting on the ground. I have a locking hitch pin I can use for added security. A simple and cheap fix.
by: Barry07/02/2023
I ultimately had to return this item outside of the etrailer.com return window, but UltraFab exchanged the product with no problems. Currently using it on my rear bumper with a license plate frame holder.
by: Ben W04/06/2017
Fits great on the 4" bumper on our motorhome. Seems very sturdy and should work great for our 2 bike rack, without interfering with the trailer hitch.
I'd probably give it 5 stars, just haven't gotten to use it yet.
by: Zachary08/20/2020
Ise this item on my travel trailer to keep my hitch out of the way,off the ground. Love it to store it so I don’t kick it on the ground.
by: David05/30/2021
I looked at several options for attaching a bike rack to my camper and this was what I wanted. I looked at several similar items on Another online retailer that had complaints about the receiver falling off because of faulty welds. I am quite certain that this product won’t come apart, in fact, you could probably pick the whole camper up by it. It is built like a tank, and is incredibly easy to install. It was more expensive than the junk on Another online retailer, but I won’t be worrying about my bikes falling off going down the road
by: Randy 07/15/2023
It works great I put a bike rack on it and it is fine .
by: Jeremie06/04/2023
Has held up well on camper to hold bike rack and a carrier.
by: Larry06/01/2018
I placed my order and had my part within a week. Now we can take our bikes with us wherever we go. Just moved the spare tire over and bolted the reciever right on. Thanks guys.
by: Bruce B05/17/2012
This product was very easy to install and will be perfect for holding our bike rack. Very heavy duty for the price, excellent quality.
by: Rob10/09/2013
Exactly what I ordered and on time. E trailer is where I go to get stuff for my camper.
by: Bruce08/30/2015
This was the product I needed to store an accessory from my truck on my fifth wheel camper bumper while not in use. I actually mounted this "vertical" to store my motorcycle carrier "out of the way". I could see mounting this normally to carry light weight accessories while trailering my fifth wheel.
Bruce
8/29/2016
After a year, product is still what I wanted and doing what I needed. Actually moved to a new fifth wheel in December and brought this forward to the new camper. Very handy!
by: Randy05/22/2013
I received this product and immediatley installed on my camper bumper, while installing I found two of the 4 lock nut would not screw on to the "U" bolts provided. I then found two of the same size nuts in my toolbox and completed the install. After inserting the bike carrier one of the "U" bolts broke off, It looks as if the "U" bolts are made of a cheap material.I had to purchase a "U" bolt from the local hardware store to replace the broken one. I don't know if I would recommend this to anyonebecause of the faulty "U" bolt.
Randy
5/22/2014
After replacing the cheap U bolts with new ones, so far the product is work well.
by: Tony M.10/01/2014
I got this product our RV rear bumper to put a bike rack forour two bicycles and I'm very happy with the hitch receiver it is well made and great item that I needed to carry our bike.I highly recommend this hitch receiver.
Tony M.
10/1/2015
Great just what I wanted and needed, it was a easy installation and Im very happy with the results, thank you again for this great product I strongly recommend this product.
by: David01/30/2018
Thank you
Received my bracket on time, great quality, easy to install, exactly what I was looking for.
Recommend this bracket to any RV person wanting to transport bicycles. Receiver is perfect for my Yakima bike rack...
David
1/30/2019
Its Great! Thank you....
by: Jim O06/22/2016
This product was perfect to attach to my hard shell trailer for our bike rack.
etrailer did a great job from the ordering process to delivery. Thanks for having a great process set-up to buy from you!
Jim O.
6/22/2017
Your product has worked out very well, the metal gauge thickness is very strong!
by: RoseyDazey 05/15/2017
Very happy with the product we purchased for our RV. It fit perfect, and now we can transport our bicycles when we go camping! Now we don't have to take up space inside the RV or the back of the truck!! See attached photos.
by: Rich Z.02/19/2017
They worked great for adding a platform and toolbox onto the back of my travel trailer. I know I couldn't have fabricated and added the hardware for the price!
Rich Z.
2/19/2018
Been a year and lots of miles with bumps and potholes but the brackets have remained tight and working like they should. Thanks
by: Frank W.08/10/2014
Attached easily to the back of my camper and my bike rack slipped right into the receiver. Overall, a good buy that met my needs.
Frank W.
8/10/2015
Great!
by: Don 10/23/2016
Works just like it should. Just finishing using to go to VA and ride the Creeper trailer. Used just like to carry our bikes to Alaska and back
Don
10/24/2017
Still providing good useage. Glad I purchased it.
by: Teresa Morris02/14/2017
This is the 4th item I have purchased from etrailer, as usual a quality product at competitive price, very helpful customer service and on point shipiping, If etrailer has it I will purchase it from them
Teresa M.
2/20/2018
Have ordered several items from etrailer and all are quality items that are working the same as the day I received them.
by: Doug09/29/2018
Great value. Low price with high value. Bolted right on. Would recommend. Installed on rear bumper of a 2014 Salem 24 cruise light.
Douglas R.
10/13/2019
All good.
25
393
Show More Reviews
See what our Experts say about this Ultra-Fab Products RV and Camper Hitch
- Rear Bumper Hitch Solution for 4 inch Bumper with Limited Clearance Above BumperDue to the limited clearance you have above your rear bumper you'd need to install a bumper hitch that hangs below the rear bumper like the Buyers Products # 3371804060 as the # UF35-946401 needs to install above the rear bumper.
view full answer... - Will Ultra-Fab Motor Home Trailer Hitch # UF35-946401 Fit a 2008 Chrysler AspenThe Ultra-Fab Motor Home 2-Inch Trailer Hitch, part # UF35-946401, is intended for installation on the rear of motor homes that have an exposed 4-inch bumper. Installation requires that the bumper be fully open in order to allow the U-bolts to attach securely. This hitch is not suitable for use on your 2008 Chrysler Aspen. The bumper on your vehicle is designed to protect the passengers in the event of an impact. Even if you removed part of the bumper cover to expose the bumper itself,...
view full answer... - Recommendations For Carrying 2 Adult Bikes and 4 Kids Bikes On a Travel TrailerI have a better solution for you, the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 will attach to the front of your travel trailer using the same bolts that hold the tongue jack. This will hold 2 bikes up to 80lbs total on the front of your camper above the propane tanks. If that type of connection will not work for your trailer jack, the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 will bolt to the trailers frame and allow you to use a hitch mounted bike...
view full answer... - What is the Weight Limit on Ultra-Fab 2 Inch Motor Home Trailer Hitch ReceiverThe Ultra-Fab Motor Home Trailer Hitch Receiver, # UF35-946401, was designed with the RV/trailer application in mind. As such the additional torque from accessories bouncing in the receiver was taken into account when the weight capacity of 200 pounds was given to the hitch. You might want to consider going with something rated a little higher, like # E-100, or # UF35-946402, which both have a 350 pound capacity, because with your intended load you will be getting close to the tongue...
view full answer... - Recommended Bike Rack and Hitch Receiver for Travel Trailer BumperThanks for the photo. The Swagman Around the Spare Deluxe 2 Bike Rack for RV Bumpers # S80501 and the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 are great options for your 2016 Pacific Coachworks Northland Travel Trailer. The bumper has to be completely enclosed is the explanation you are likely seeking. The Tube with fully welded enclosed ends is ideal and is normal for many applications but not all. You can alternatively use the Curt RV Bumper 2" Trailer...
view full answer...
- Hitch Availability for Rear of 2010 Carriage Carri-Lite 5th Wheel TrailerI was able to find many photos of your 2010 Carriage Carri-Lite 5th wheel trailer, but I was not able to confirm the specs for its bumper or frame width. We offer two types of trailer hitch for use on the back of an RV such as your 5th wheel, a bumper-mount type like the Ultra-Fab 2-Inch Motor Home Trailer Hitch # UF35-946401 (see linked video) as well as a frame-mount multi-fit receiver such as # UF35-946403, both rated for use with accessories, not towing. All options can be seen on the...
view full answer... - Recommended Frame Mounted Trailer Hitch For A 73" Frame Width On A Springdale Summerland 2600The only hitch we currently carry that would fit a 73" frame width is the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames Item # UF35-946403. It is a weld on and has a tongue weight capacity of 350lbs. It is not rated for towing. I do not recommend using any bumper-mounted hitch receivers like the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" BumpersItem # UF35-946401 you linked to unless you know the weight capacity of the bumper.
view full answer... - Options to Maneuver a Travel Trailer for Set-Up/Parking Without BackingWe do have a selection of bumper mounted bolt-on hitch receivers such as the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 that fits a 4"x4" bumper and then provides for a 2" receiver; although this is not designed for the type of use you are describing. My suggestion is to consider the Trailer Valet XL Trailer Dolly with Chain Drive with 2" Hitch Ball, # TVXL2 or if needed, 2-5/16" ball in # TVXL25. This heavy-duty dolly with integrated drive will help you maneuver your trailer into...
view full answer... - Bike Rack Recommendations While Towing Tear Camper with 2011 Ford FiestaI do have a couple of possible solutions for you, however I cannot recommend using a hitch extender along with the Ultra-Fab 2" Motor Home Trailer Hitch Receiver # UF35-946401 or something similar, to tow your tear camper with a hitch mounted bike rack. Using a hitch extender is going to reduce the weight capacity of your trailer hitch by 50%, so you will simply not have enough capacity for the camper and bike rack when the extender is used. Also, the Ultra-Fab Motor Home Hitch Receiver...
view full answer... - RV Hitch and Cargo Carrier Recommendations to Allow Transporting 190-lb GeneratorWe offer two varieties of trailer hitch receivers for use on RVs, the bolt-on 4 x 4 inch-bumper-mount type such as the Ultra-Fab 2-Inch Motor Home Trailer Hitch Receiver # UF35-946401 that you referenced, and the higher-capacity multi-fit frame-mount type like the Curt # C13701. I suggest you check your RV owner's manual for any guidance or restrictions regarding the use of bumper- or frame-mount hitches and accessories. For safety and capacity I suggest a frame-mount hitch for your application. The...
view full answer... - Clamp On Fifth Wheel Bike Rack Options for eBikesI am happy to help you find the right bike rack set up for your fifth wheel trailer. Unfortunately, the Hollywood RV Rider # HLY64FR requires a receiver with at least a 350 lbs. TW capacity. It is not compatible with Bumper Mounted Hitch Receiver Adapters (see photo below), but it is specifically designed to support heavier bikes such as your 2 ebikes. We do not have a bike rack available that is compatible with Bumper Mounted Hitch Receiver Adapters and can support heavier E-Bikes. As...
view full answer...
- Is Trailer Hitch capacity Reduced When Using Curt Multipurpose Ball Mount # D210The Curt Multipurpose Ball Mount, part # D210 will not reduce the weight capacity of your trailer hitch. The # D210 does have a 7,500-lb towing capacity and a 750-lb tongue weight capacity so you will need to make sure you do not exceed those capacities when using this ball mount.
view full answer... - Bumper Hitch that Can Fit Bumper of 2011 JayFeather That's 4.5 inch by 1.5 inchThe best solution we have is going to be the Ultra Fab hitch part # UF35-946401 which is designed to attach to a bumper that is 4.5 inches tall and 4 inches wide. Since your bumper is narrower you'd need to come up with spacers to take up the additional width. I attached an install video for this for you to check out as well.
view full answer...
- Hitch Receiver Size of Ultra-Fab 2-Inch Bumper Mount Hitch # UF35-946401The Ultra-Fab 2-Inch Bumper Mount Hitch, part # UF35-946401, is only available with a 2-inch receiver opening. All of the RV bumper mount hitches we carry have a 2-inch size receiver opening. We have the Brophy Hitch Reducer, part # HT02, that will reduce a 2-inch hitch to a 1-1/4 inch size, because it is a sleeve design it will not reduce the tongue weight capacity. Since you did not mention what you will be doing with the bumper mount hitch, I cannot for sure recommend the # HT02 hitch...
view full answer... - Receiver Size of Ultra-Fab 2-Inch Bumper Mount Hitch # UF35-946401The Ultra-Fab 2-Inch Bumper Mount Hitch, part # UF35-946401, is only available with a 2-inch receiver opening. All of the RV bumper mount hitches will have a 2-inch size receiver opening. Trailer hitch receiver sizes are available in three different sizes, 1-1/4 inch, 2-inch, and 2-1/2 inch. The two most common sizes would be the Class I and Class II 1-1/4 inch, and the Class III and Class IV 2-inch. The Class V 2-1/2 inch size is used on heavy-duty trucks. I am including a link to a...
view full answer... - Mounting Ultra Fab # UF35-946401 Under BumperIt is acceptable to mount the Ultra Fab # UF35-946401 underneath the bumper. Make sure the 200 lb capacity of the receiver or the capacity of the bumper (whichever is lower) is not exceeded. This receiver is meant to mount to a 4 inch Steel RV bumpers, and not to a car or truck. It is not intended to be used for towing purposes.
view full answer... - Recommended Bike Rack for Trailer with Tilting Bumper Mounted Spare TireFor your camping trailer that has a tilting bumper mounted spare tire, I recommend looking at an RV approved hitch-mounted bike rack like the Swagman Dispatch 2 Bike Platform Rack # S44FR. This will slide into a 2 inch trailer hitch receiver and hold 2 bikes of up to 45 pounds each. When the bikes are unloaded from the carrier, the upright mast can be folded down to allow you to tilt back the spare tire on your trailer for rear storage access. This carrier also includes a hitch and cable...
view full answer... - Installing Ultra-Fab # UF35-946401 Bumper Mounted Receiver on 2 x 2 Pipe Bumper on RVWhen you describe a 'pipe bumper' do you mean that its round, or is constructed of square tube? If it's a round pipe, I wouldn't recommend attaching a receiver to the bumper as any tongue weight (downward force applied to the receiver) would rotate the receiver tube downward. If you're talking square tube, the Ultra-Fab # UF35-946401 wouldn't be your best option as the threaded portion is about 1-3/4 of an inch long. It wouldn't cinch tight enough, plus the spacing between the legs of...
view full answer... - Recommended 2 Inch Receiver for Zero Turn Lawnmower Fertilizer SpreaderWe don't have anything like the # 13333 that has mounting holes 10 inches apart. For your application you will need to either customize a fit for that part or use a different style like the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers # UF35-946401 which could be bolted to a strong frame crossbeam for your unique need. Another option is to use the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs # RP7065100 for this custom application.
view full answer... - Recommended Hitch and Hitch Bike Rack for 2014 Rockwood Ultralite 5th WheelYou need to use an RV-rated hitch bike rack in the hitch you will install on the rear of your 5th wheel trailer. Regular bike racks meant for use on cars, like the excellent Kuat NV 2.0 # NV22G, cannot be used on a trailer. This is due to the extra stresses placed on carriers that are mounted on the rear of a trailer. Let's start with a hitch for your trailer. We offer both bumper-mount and frame-mount 2-inch hitch receivers for trailers that can be seen on the linked page. Your best bet...
view full answer... - Solutions for Towing Forest River Roo Travel Trailer and Carrying Bikes SimultaneouslyThere are a few different options that might work for you. A towing bike rack can be a good option depending on the tongue weight of your camper. The Curt # C18013 used in conjunction with an extra long ball mount like # 2736 or # D-28 (choose the one with the rise or drop you're needing) might be a good option, but keep in mind that the tongue weight capacity of the hitch would be reduced by the weight of the rack and the bikes. For instance, say the three bikes weigh 100 lbs. The rack...
view full answer... - Alternate Mounting of Ultra-Fab 2" Motor Home Trailer Hitch ReceiverI contacted the Tech Rep at Ultra Fab Products, they stated that it can be mounted underneath but they do recommend it on top. The Ultra-Fab 2" Motor Home Trailer Hitch Receiver, # UF35-946401 is designed, tested and weight rated for an installation of weight setting above the bumper not below. Any alternate installation of product is determined by the purchaser with that understanding. They added that if you are going to be installing a bike rack on the hitch, be sure to pay very close...
view full answer... - Can the U-Bolts On the Ultra-Fab Motor Home Trailer Hitch Receiver Be TurnedThe Ultra-Fab 2" Motor Home Trailer Hitch Receiver part # UF35-946401 has a bolt hole spacing of 5" front to back and 4" side to side so it does not sound like it would work for you. However, we do have the Stromberg Carlson 2" Motor Home Hitch Receiver part # BA-100 which has a bolt hole spacing of 5" front to back and 5" side to side so it does sound like it would work for you although I am not quite sure of the intended purpose.
view full answer... - Trailer Hitch Availability for Gulfstream Sea Hawk 5th Wheel TrailerWe offer both bumper-mount and frame-mount hitch receivers for use on 5th wheel trailers that can be seen by clicking on the linked page. All have a 2-inch receiver opening. Some of these are bolt-on products while others require welding. For example, part # UF35-946401 from Ultra-Fab is a bolt-on bumper mount hitch, while part # UF35-946403 is a weld-on frame-mount hitch. I checked the Gulfstream website for bumper/frame specs for your 5th wheel but these are not provided, so you'll want...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Lindsey S
Video Edited:
Jacob T
Installed by:
Kathleen M
Installed by:
Randy B
Installed by:
Conner L
Installed by:
Michael B
Updated by:
Wilson B
Updated by:
Halie H
Updated by:
Eric H
Video by:
Zach D
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark H.
8/24/2015
Did you end up having any problem with the weight of the scooter breaking the bolts..? I am buying 2 to do something similar...making a carrier for my generator and plan on using 2 hitches...