Options to Maneuver a Travel Trailer for Set-Up/Parking Without Backing
Updated 04/16/2021 | Published 04/14/2021 >
Products Featured in This Question
Question:
Is there any hitch product that can be mounted to the rear frame of a 24foot Keystone Cougar travel trailer that would allow the trailer to be attached to tow vehicle and then maneuvered from its rear/back end? The desired parking spot on our property for the trailer is limited and there is no pull through access. The trailer door is on passenger side of tow vehicle per norm... It would be ideal if we could tow the trailer up to parking spot entrance then disconnect and reconnect tow vehicle to a hitch mounted on the REAR of the trailer to guide it into place. In order for the trailer entry steps & windows to be on the 'Lake View' side of the trailer the tow bar must be "in". *Not to tow long distance-But just for parking it....like an airplane @ the airport-just use rear hitch arrangement to push it into place
asked by: Mara
Expert Reply:
We do have a selection of bumper mounted bolt-on hitch receivers such as the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 that fits a 4"x4" bumper and then provides for a 2" receiver; although this is not designed for the type of use you are describing.
My suggestion is to consider the Trailer Valet XL Trailer Dolly with Chain Drive with 2" Hitch Ball, # TVXL2 or if needed, 2-5/16" ball in # TVXL25. This heavy-duty dolly with integrated drive will help you maneuver your trailer into the tight fit you describe by simply connecting this to your trailer and start turning the crank, then guide the trailer with the steering handle. This also has a drill attachment option that allows you to use a cordless drill instead of cranking. Please take a look at the attached product review video to see this in use.
For a front mount, there is the Draw-Tite Front Mount Trailer Hitch Receiver, # 65076.
Product Page this Question was Asked From
Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Trailer Dolly
- Manual Dolly
- Automatic Brake
- 10000 lbs
- 19 Inch Tall
- 20 Inch Tall
- 2 Inch Ball
- Trailer Valet
more information >
Featured Help Information
Miscellaneous Media





Continue Researching
- Q&A: Trailer Valet XL Hitch Ball Rotating During Use
- Q&A: Replacement Shock Absorbing Pin Box For 2022 Grand Design 150 Series
- Q&A: Can Trailer Valet XL Be Used on Sloping Driveway
- Q&A: Will Parkit360 Force Electric Trailer Dolly Work On An Incline?
- Q&A: Dolly Recommendation for Moving Small Trailer Around When Not Connected to Vehicle
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What Is The Best Trailer Valet Dolly To Use On Loose Gravel?
- Q&A: Problem with Trailer Valet XL Not Staying in Upright Position
- Article: Holiday 2025 | Best Gifts for RVing
- Article: Trailer Maintenance Schedule
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Back Up a Trailer
- Article: Trailer Wiring Diagrams

