To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.
Features:
Note: For use with RV-approved accessories only.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation
Average Customer Rating: 4.8 out of 5 stars (727 Customer Reviews)
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.I still need to install it but the quality looks perfect. I like that with this style you can mount it off-center if you have a spare tire as well on your back bumper I really appreciate the expedited shipping. I always shop from a trailer if I can.
Just installed this unit on my travel trailer bumper and it appears to be fairly heavy duty and secure. Did have some trouble getting it on the bumper but used my truck tire jack for leverage & it popped right on (see photo). The receiver is just what I need for my bike rack & 2 bikes that I will be hauling to Florida next month. Safety first & this unit looks well made & will hold to the challenges of the road.
Lynn
1/25/2020
After a year & 2 trips to Florida is perfect! No need to tighten the bolts due to vibration & wear & tear from a 45 lb bike rack & 40 lbs of bikes. I am extremely pleased with this receiver!
The Curt trailer hitch is solid as can be and couldn't have been any easier to install. Product arrived ahead of schedule and George at the erailer is great with email communications . I will be purchasing future products from this company. Great job George at etrailer. happy camping
Gary B.
7/20/2018
Finally started using it this year it works great!!
As advertised, fit perfect on the back of my camper, no issues. Always great service from etrailer
This receiver fit perfectly and was easy to install. We have our Stow a Way luggage carrier mounted on the back of our little RV trailer.
Tried to download a pic but unsuccessful.
Solid hitch. Performs as it should, was easy to install.
Box was delivered all busted up and taped up like Simone returned it missing 1 nut and scratches all ove not happy at all for the price should’ve told me it was used or something
Brooke M.
5/23/2024
Thanks for letting us know and for the pictures! I will make sure our team gets you taken care of.
Thank you etrailer, I’ve been looking for this bumper receiver for my 38’ Keystone toy hauler for a bike rack. Ordered and four days later it’s here. Installed in 10mins, fits perfectly. I used a flat washer and nylok nuts instead of nuts supplied. Well built and sturdy.
Randall
12/11/2020
Great product, we used it all summer on our travels without any problems.
This thing is holding up great. I had a different stile before and it broke driving down the road. Causing my cargo rack to fall off carrying my generator and my bb-qer. But this mount has been amazing
Awesome product. I did have one problem with it but it was on my end. The bumper on my Keystone Summerland Series Mini was a little to close to the body so I had to flip the mount over to make the bolts work. Shipping was fast!!!! 4 days including the day I ordered. Would have been 3 but something happened with UPS. I will definitely be buying more products from etrailer Corporation.
Kyle
12/9/2018
Still holding up great a year later. It easily allows me to carry my cargo receiver which has my generator and a couple five gallon gas cans on the back.
Delivered quickly. Haven’t installed it yet and look forward to using this for my Thule Bike rack.
I have a 21.5' Trail-Lite RV that had a plastic bumper. I wanted to put a Bike Rack on the back of the RV, so I bought some 3/16" 4" x 4" square stock and had a welder weld it on the back of the RV. This is a lot heaver duty than a stock bumper. Once the bumper was installed, I bought this Curt bumper hitch, part E-100, from etrailer.com. Installation was a breeze, and only took a few minutes. I used some grease and a small hydraulic jack to encourage the hitch to slide on. You DO NOT need to drill out the holes as some have reported. A 4 pound sledge will encourage the back hitch hole to pop above the 4" bumper. Use some never seize on the threads so it will come apart some day. Here is the finished product, with my e-bike installed. Shipping was quick and FREE! (I ordered over $100 of stuff)
A previous trailer hitch receiver was not adequate for a bike rack with heavy mountain bikes. It developed cracks in the metal. There’s a fair amount of vibration for a bike rack at the back end of a camp trailer. I bought the Curt receiver to mount a 50# Kuat bike rack to carry two +50# e-bikes. So the load is +150# plus the torque of extending almost three feet from the receiver. Worked great. An observer noted the rack and bikes were quite stable.
Torqued to spec. and works as expected. We hang a bike rack off of it on the back of a travel trailer. Solid design.
Reason not a 5: There was a slight alignment issue getting the bolts through both sides due to the stampings not being aligned when welded. Once I got the bolts through, no issue, but there was interference with the threads on the stamping; had to turn the bolts through as they would not slip through.
Still would recommend.
Wow! Service was personal, quick & complete! Will definitely buy from the folks at etrailer again!
Thanks to etrailer and Michelle for helping me select the Curt E-100 4" bumper mount cargo reciever hitch. The quick delivery helped us get on our fall trip accordingly. Definatly the right product for this application.
Hitch mount was as info described. Needed to mount a heavy 4 bike rack on my RV. Arrived on time and fit perfectly. etrailer videos were very helpful in selecting the right hitch for my weight requirements. You took the time to make them to support the products, you earned my business because of it.
Easy to install and has worked great for a bike rack on the back of our travel trailer.
Great product, solid and easy to install on our Flagstaff Camper. E-Trailer kept a timely Email contact informing me of the tracking progress on delivery. Thanks for the great product and professional service.
Very prompt shipping thank you! Easy to order
You're awesome!:)
HELLO
I LOOKED AT A LOT OF TRAILER HITCH RECEIVERS.
AND THEY WERE ALL JUNK.
ON TELL I FOUND CURT RV TRAILER RECEIVER
I NEED IT FOR MY BIKE RACK
I LIKE THE WAY IT IS MADE
IT LOOKS GOOD ON MY NEW RV
THANK YOU ETRAILER YOUR RATING IS EXCELLENT
I SENT YOU THE MONEY IT WAS ON MY PORCH IN 3 DAYS
I am using the Curt bumper hitch for my travel trailer . I mounted it to the 4x4 bumper . It fit well and will be perfect for holding my kayaks . Would recommend to anyone , great product !!
just received today, mounted it on the bumper vertically so as to make a mount for my waste travel tote for my travel trailer, or i can mount horizontally to use my luggage rack.
Shipping was quick.
So far so good.
This one missed the quality control step. Tolerances were too close and missed the mark. Had to remove just a small bit of weld with a to clear the bolt mounting holes.
sorry didn't think about documenting it with a picture.
Do you have a question about this RV and Camper Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Stephen
3/28/2024
Paint is holding up perfectly and it’s still easy to use. If you install this on a bumper, it’s really recommended that you weld the bumper to strengthen or get some products to help out. The torque on the frame connection will rip off the bumper eventually if not reinforced