Curt RV Bumper 2" Trailer Hitch Receiver
Item # E-100
Our Price: $96.22
Confirmed to Fit
2016 Forest River Wildwood Travel Trailer
185RB
195BH
26TBSS
27RKSS
27RLSS
28DBUD
28RLDS
29FKBS
29QBDS
29UD3
30KQBSS
30LOFTK
30QBSS
31BKIS
31KQBTS
31QBTS
32BHDS
353FLFB
36BHBS
37BHSS2Q
38RLT
39FDEN
4002Q
400RETS
402QBQ
426-2B
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (727)
- Q & A (0)
- Photos
2016 Forest River Wildwood Travel Trailer - Curt RV Bumper 2" Trailer Hitch Receiver
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- CURT
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.
Features:
- Has 2" square receiver opening, ideal for hitch accessories such as bike racks and cargo carriers
- Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers
- Powder coat finish resists corrosion
- Includes mounting hardware
- Weight capacity: 3,500 lbs GTW / 350 lbs TW
Note: For use with RV-approved accessories only.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
19100 Curt RV Bumper 2" Trailer Hitch Receiver
Installation Details
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Curt RV Bumper 2" Trailer Hitch Receiver - E-100
Average Customer Rating: 4.8 out of 5 stars (727 Customer Reviews)
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.by: Stephen 03/27/2023
I still need to install it but the quality looks perfect. I like that with this style you can mount it off-center if you have a spare tire as well on your back bumper I really appreciate the expedited shipping. I always shop from a trailer if I can.
by: Lynn01/24/2019
2017 Toyota Tundra
Just installed this unit on my travel trailer bumper and it appears to be fairly heavy duty and secure. Did have some trouble getting it on the bumper but used my truck tire jack for leverage & it popped right on (see photo). The receiver is just what I need for my bike rack & 2 bikes that I will be hauling to Florida next month. Safety first & this unit looks well made & will hold to the challenges of the road.
Lynn
1/25/2020
After a year & 2 trips to Florida is perfect! No need to tighten the bolts due to vibration & wear & tear from a 45 lb bike rack & 40 lbs of bikes. I am extremely pleased with this receiver!
by: Gary B.07/18/2017
The Curt trailer hitch is solid as can be and couldn't have been any easier to install. Product arrived ahead of schedule and George at the erailer is great with email communications . I will be purchasing future products from this company. Great job George at etrailer. happy camping
Gary B.
7/20/2018
Finally started using it this year it works great!!
by: Kevin04/25/2024
As advertised, fit perfect on the back of my camper, no issues. Always great service from etrailer
by: Lawrence02/10/2024
2016 Jayco Jay Flight SLX Travel Trailer
This receiver fit perfectly and was easy to install. We have our Stow a Way luggage carrier mounted on the back of our little RV trailer.
Tried to download a pic but unsuccessful.
by: Timothy 05/22/2024
Solid hitch. Performs as it should, was easy to install.
by: Chris05/23/2024
Box was delivered all busted up and taped up like Simone returned it missing 1 nut and scratches all ove not happy at all for the price should’ve told me it was used or something
Brooke M.
5/23/2024
Thanks for letting us know and for the pictures! I will make sure our team gets you taken care of.
by: Randall12/10/2019
Thank you etrailer, I’ve been looking for this bumper receiver for my 38’ Keystone toy hauler for a bike rack. Ordered and four days later it’s here. Installed in 10mins, fits perfectly. I used a flat washer and nylok nuts instead of nuts supplied. Well built and sturdy.
Randall
12/11/2020
Great product, we used it all summer on our travels without any problems.
by: Aaron11/24/2022
This thing is holding up great. I had a different stile before and it broke driving down the road. Causing my cargo rack to fall off carrying my generator and my bb-qer. But this mount has been amazing
by: Kyle12/09/2017
Awesome product. I did have one problem with it but it was on my end. The bumper on my Keystone Summerland Series Mini was a little to close to the body so I had to flip the mount over to make the bolts work. Shipping was fast!!!! 4 days including the day I ordered. Would have been 3 but something happened with UPS. I will definitely be buying more products from etrailer Corporation.
Kyle
12/9/2018
Still holding up great a year later. It easily allows me to carry my cargo receiver which has my generator and a couple five gallon gas cans on the back.
by: Matt 10/09/2023
Delivered quickly. Haven’t installed it yet and look forward to using this for my Thule Bike rack.
by: Bill T.10/30/2019
I have a 21.5' Trail-Lite RV that had a plastic bumper. I wanted to put a Bike Rack on the back of the RV, so I bought some 3/16" 4" x 4" square stock and had a welder weld it on the back of the RV. This is a lot heaver duty than a stock bumper. Once the bumper was installed, I bought this Curt bumper hitch, part E-100, from etrailer.com. Installation was a breeze, and only took a few minutes. I used some grease and a small hydraulic jack to encourage the hitch to slide on. You DO NOT need to drill out the holes as some have reported. A 4 pound sledge will encourage the back hitch hole to pop above the 4" bumper. Use some never seize on the threads so it will come apart some day. Here is the finished product, with my e-bike installed. Shipping was quick and FREE! (I ordered over $100 of stuff)
by: Mark06/04/2023
A previous trailer hitch receiver was not adequate for a bike rack with heavy mountain bikes. It developed cracks in the metal. There’s a fair amount of vibration for a bike rack at the back end of a camp trailer. I bought the Curt receiver to mount a 50# Kuat bike rack to carry two +50# e-bikes. So the load is +150# plus the torque of extending almost three feet from the receiver. Worked great. An observer noted the rack and bikes were quite stable.
by: DW07/24/2019
Torqued to spec. and works as expected. We hang a bike rack off of it on the back of a travel trailer. Solid design.
Reason not a 5: There was a slight alignment issue getting the bolts through both sides due to the stampings not being aligned when welded. Once I got the bolts through, no issue, but there was interference with the threads on the stamping; had to turn the bolts through as they would not slip through.
Still would recommend.
by: Bruce11/24/2023
Wow! Service was personal, quick & complete! Will definitely buy from the folks at etrailer again!
by: Eric09/24/2019
Thanks to etrailer and Michelle for helping me select the Curt E-100 4" bumper mount cargo reciever hitch. The quick delivery helped us get on our fall trip accordingly. Definatly the right product for this application.
by: Matthew06/22/2020
Hitch mount was as info described. Needed to mount a heavy 4 bike rack on my RV. Arrived on time and fit perfectly. etrailer videos were very helpful in selecting the right hitch for my weight requirements. You took the time to make them to support the products, you earned my business because of it.
by: Nate 08/30/2023
Easy to install and has worked great for a bike rack on the back of our travel trailer.
by: Bill06/17/2020
Great product, solid and easy to install on our Flagstaff Camper. E-Trailer kept a timely Email contact informing me of the tracking progress on delivery. Thanks for the great product and professional service.
by: Gregory 05/04/2024
2022 Grand Design Imagine Travel Trailer
Very prompt shipping thank you! Easy to order
by: Gary 05/25/2024
2016 Grand Design Imagine Travel Trailer
You're awesome!:)
by: RAY K04/13/2012
HELLO
I LOOKED AT A LOT OF TRAILER HITCH RECEIVERS.
AND THEY WERE ALL JUNK.
ON TELL I FOUND CURT RV TRAILER RECEIVER
I NEED IT FOR MY BIKE RACK
I LIKE THE WAY IT IS MADE
IT LOOKS GOOD ON MY NEW RV
THANK YOU ETRAILER YOUR RATING IS EXCELLENT
I SENT YOU THE MONEY IT WAS ON MY PORCH IN 3 DAYS
by: Jody06/13/2020
I am using the Curt bumper hitch for my travel trailer . I mounted it to the 4x4 bumper . It fit well and will be perfect for holding my kayaks . Would recommend to anyone , great product !!
by: Philip11/20/2018
0 0
just received today, mounted it on the bumper vertically so as to make a mount for my waste travel tote for my travel trailer, or i can mount horizontally to use my luggage rack.
Shipping was quick.
So far so good.
by: Johnny07/14/2023
This one missed the quality control step. Tolerances were too close and missed the mark. Had to remove just a small bit of weld with a to clear the bolt mounting holes.
sorry didn't think about documenting it with a picture.
25
727
Show More Reviews
See what our Experts say about this CURT RV and Camper Hitch
- Hitch Solution for RV with Sealed Lower Panel Covering Rear FrameSince your trailer's frame is not easily accessible due to paneling on the bottom of the RV you'd want to go with a bumper hitch like the part # E-100 and move the spare wheel off-center on the bumper so the hitch hitch fit. A friction sway control unit like part # 83660 would be a great option to reduce sway as well.
view full answer...
- Trailer Hitch Options For A 2004 Crossroads CruiserWe do have a hitch you can put on the back of your 2004 Crossroads Cruiser. There is not any kind of custom fit hitch available, but you can use an adjustable hitch like the Curt # 13703. This hitch is designed to be universal and can be made to fit virtually any frame between 22" and 72" long. It will have to be bolted/welded to the frame. The hitch itself is rated for 3,500 lbs towing. It also has about 4" of drop which should help to clear your bumper if present. That said, I was looking...
view full answer... - Hitch Bike Rack Recommendation for Rear of RVWe dont' have the parts you mentioned so we don't have any firsthand experience with them, but since you said 4 inch square bumper that most likely means you are planning on carrying a bike rack at the rear of an RV which when you do this you have to be sure to use a bike rack approved for use behind and RV. If you are looking for a hitch to fit a 4 inch bumper though we have the part # E-100. At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality...
view full answer...
- Bike Rack Recommendation for Rear of RVAt the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the rear of the trailer which exaggerates the movement of the trailer when hitting bumps. Because of that only a few bike racks were designed to be reinforced enough for that type of use. Swagman has the E-Spec part # S94FR which is RV approved and...
view full answer... - Compatibility of Rear RV Trailer Hitch Receiver for 2017 Prime Time Crusader Lite 28RLYour 2017 Prime Time Crusader Lite 28RL trailer according to the manufacturer was not designed to accommodate the addition of a hitch to the rear bumper or frame. So they will not warranty the addition of the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 or the addition of a hitch like # C13701. You will need to weigh the risk when desiring to tow as most 5th wheel trailers and these hitch options would allow for that utility trailer with ATV towing or small aluminum boat. The hitches...
view full answer... - Could Bumper Hitch E-100 Fit a 3 inch BumperYou could have 1 inch spacers put on the bumper so that the 4 inch bumper hitches we offer like the # E-100 would fit. Metal 1 inch spacers would be what you would need. Ideally you would have them welded to the bumper.
view full answer... - Recommended Rear Bumper Hitch for Trailer That Mounts Above BumperThe Curt RV Bumper Hitch part # E-100 can be inverted so as long as you have a 4" x 4" rear bumper which is the standard size then you'll be good to go.
view full answer... - Carrying Electric Bikes on My RV BumperWhile the Swagman 4 Bumper Mounted Bike Rack # S80600 has a total capacity of 120 lbs, it also has a per bike capacity of 30lbs. That means the individual mounting points for each bike is not rated for bikes heavier than 30lbs. Thankfully, bike rack technology has improved in recent years and we have more options for you! I recommend using a bumper hitch receiver like the Curt RV Bumper Hitch # E-100. This fits around 4" square bumpers and has a 350 tongue weight capacity. For a bike...
view full answer... - Will Curt Adjustable Width Trailer Hitch Fit 2020 Lance 2285 Travel TrailerThe Curt # 13703 fits 22" - 72" frame widths and works on box, C-channel, and I-beam frames. As long as this is what you have on your travel trailer it will fit. There is no specific information on the frame of your 2020 Lance 2285 so this is something you will have to measure and confirm yourself. You may also want to check out the Curt RV Bumper 2" Trailer Hitch Receiver # E-100. This bolts onto 4" square channel bumpers found on many travel trailers. Before using this to tow or carry...
view full answer... - Could Curt E-100 Bumper Hitch Fit 4 inch Bumper of 2019 Casita Travel TrailerThe Curt hitch part # E-100 does fit 4 inch square bumpers like what your Casita trailer has so it will fit. You'll need to make sure the bumper is boxed and doesn't have an open side. We don't have any 5 bike racks that are approved for use at the rear of a travel trailer but we do have the Swagman Original part # S64400 which can carry 4 bikes and is rated for the rougher ride quality at the rear of a travel trailer.
view full answer... - Hitch to Attach to Heartland Big Country 4 inch Rear Bumper to Carry KayaksThe Curt hitch you are looking at part # E-100 will fit the 4 inch square bumper of your 5th wheel and has a tongue weight capacity 350 lbs tongue weight so it would easily carry 150 lbs of tongue weight. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack or hitch kayak carrier. I attached a review video for you to check for the strap as well. You might run the strap to the RV ladder in your picture.
view full answer...
- Recommended Trailer Hitch for a 2021 Grand Design XLS Travel Trailer The best hitch for your 2021 Grand Design 22 MLE XLS Imagine travel trailer is going to be the Curt RV Bumper 2" Trailer Hitch item # E-100. This hitch is custom fit and bolts directly to your Grand Designs rear bumper with included hardware. The Curt RV Bumper 2" Trailer Hitch item # E-100 has a 2" receiver. It has a 3,500 lbs gross towing weight and a 350 lbs maximum tongue weight. This hitch is made in the USA and weighs only 11 lbs. I have linked an installation video below and attached...
view full answer...
- Recommended Hitch for a Bike Rack on a 2022 Coachman Cross Trail 20CB Motorhome I have a solution for you but there's no way to convert a class I receiver to a class II and definitely not to a class III. You are in luck though there is a custom fit hitch available for your Coachman Cross Trail Motorhome. It is the Curt RV Bumper 2" Trailer Hitch Receiver item # E-100. This hitch bolts directly to your 4" square channel bumper. It has a 2" receiver and boasts a 350 lbs tongue weight capacity. I recommend verifying that your bike rack is rated to be used behind a motorhome...
view full answer... - Cargo Carrier Solution Recommendation for RV with Only Bumper at Rear and no HitchIf you have a 4 inch continuously welded bumper the Curt RV hitch part # E-100 would be a great place to start and then you could use a hitch cargo carrier. The Stromberg Carlson Cargo Carrier part # CC-100 is approved for use behind an RV like what you have. For a hitch lock that also takes out the movement of the carrier in the hitch you then would want the part # 63232.
view full answer... - Bumper Bike Rack Solution for 2015 Jayco X20E Hybrid CamperHey Charles, so the reason the RV Bumper Bike part # S80605 that you referenced requires 2 inches between the bottom of the trailer body and the top of the bumper is to clear the mounting hardware. So if you are sure you don't have that clearance you wouldn't be able to install the rack. You could possibly modify the body to gain the clearance or a bumper hitch like the part # E-100 with an RV bike rack like the # S36FR could work too.
view full answer... - Pop Up Camper Frame Mounted Hitch RecommendationFor your camper a better solution for a hitch would be a multi-fit frame mounted hitch like the part # 13703 as the dimensions of your bumper are not compatible with any of the bumper mounts we carry. The # 13703 will fit frame widths that are from 22 to 72 inches in width.
view full answer... - Will The Curt RV Bumber 2 Inch Hitch Receiver And Ultra-Fab Motorcycle Carrier Fit My 2016 Trailer?The Curt RV Bumper 2" Trailer Hitch Receiver, # E-100, will fit your 4 inch RV bumper. This hitch has a 350 lb tongue weight. The Ultra-Fab Motorcycle Carrier for 2" Hitches - With Ramp, # UF48-979033, has a 500 lb capacity, so the hitch receiver that will limit the you to the 350 lb capacity for your motorcycle weight. The Yamaha Vino 125 has a weight of 240 lbs and the Honda CB300F has a weight of 348 lbs. Both of these weights are wet weights, so it accounts for all the fluids and...
view full answer... - Whats the Difference Between Curt Hitch E-100 and C19101The difference between the Curt RV Bumper Hitch # C19101 and the Curt RV Bumper Hitch # E-100 is the application. If you have a 4 inch square bumper you would want the # E-100, if you have a 2 inch x 4 inch rectangular bumper you would want the # C19101. If you check out the pictures I attached you can see how the mounting plates are different distances apart.
view full answer...
- Recommended Hitch for a 2012 Forest River R-Pod 177The best hitch for your 2012 Forest River R-Pod 177 is going to be the Curt RV Bumper 2" Trailer Hitch item # E-100. This hitch is custom fit and bolts directly to your R-Pod's rear bumper with included hardware. The Curt RV Bumper 2" Trailer Hitch item # E-100 has a 2" receiver. It has a 3,500 lbs gross towing weight and a 350 lbs maximum tongue weight. This hitch is made in the USA and weighs only 11 lbs. I have linked an installation video below so you can see what this hitch will...
view full answer... - Can Dual Hitch Adapter Be Used with 10,000 Lb TrailerI do have an option for you but it sounds like you wanting to use a dual hitch adapter with a bike rack while towing a trailer and if that's the case then this is not a good idea, especially with a trailer this size. These typically max our at around 5,000 lbs. It also won't work if you have a weight distribution system. Instead, I recommend placing the bike rack on the trailer either on the rear with a hitch or on the front with a rack. I have attached some options below for this. Rear:...
view full answer... - Will Trailer Hitch and Loaded Bike Rack on Trailer Affect Gross Trailer Weight and Tongue WeightThe impact of a loaded bike rack on the back of the trailer will be negligible in terms of the gross trailer weight though it will count towards it. If anything it will lower the tongue weight of the trailer since more weight is at the back of the trailer. The Curt RV bumper hitch # E-100 is a fine choice provided the trailer has a 4 inch square steel bumper. Keep in mind that there are only certain bike racks that are rated for use at the back of a trailer. I have included a link to...
view full answer... - Can the Swagman Platform-Style Bike Rack 64663 be Installed on a Trailer HitchYes, you can use the Swagman Platform-Style 2 Bike Rack # S64663 with a 2" receiver, like the Curt # E-100 that you referenced, or with the bumper mount that comes with the bike rack. To ensure that this fits your application you can measure 6-3/4" from the front end of your bumper as that is about where the rearmost cradle will sit of the Swagman bike rack. If you would like to add locks to this bike rack then part # S64027 will lock the bike rack while 2 of the padlocks # 131D will...
view full answer... - Comparing Curt Bumper Mount Trailer Hitch E-100 and Frame Mount 13703Both the frame mount hitch # 13703 and the bumper mount # E-100 have 2 inch receivers. Both are rated for 350 pounds tongue weight and 3,500 pounds gross trailer weight. The bumper mount E-100 is more limited as to what it will fit on. First, the bumper has to be rated for use with a hitch. It must be a 4 inch square continuous welded steel bumper. A bumper mount hitch in general is not as stable as a frame mount. The frame mount 13703 can be bolted or welded on. It fits box frames, I-beam...
view full answer... - Cargo Carrier on the Rear of my 5th Wheel CamperIt is very common to see the 23x59 Curt Cargo Carrier for 2" Hitches part # C18151 mounted on the rear of motorhomes using the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100 which is rated for a gross trailer weight of 3500 lbs. and 350 lbs.of tongue weight. That said the carrier and hitch can both handle the weight of what you want to carry. As far as if the bumper can handle it you will need to check with your camper's manufaturer to ensure it can handle that weight.
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Randy B
Installed by:
Adam E
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Stephen
3/28/2024
Paint is holding up perfectly and it’s still easy to use. If you install this on a bumper, it’s really recommended that you weld the bumper to strengthen or get some products to help out. The torque on the frame connection will rip off the bumper eventually if not reinforced