Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers
(393 reviews)
Price: $61.94
In Stock
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers
Item # UF35-946401
Retail:$68.27
Our Price: $61.94
You Save: 9%
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (393)
- Q & A (0)
- Photos
Ultra-Fab Products RV and Camper Hitch - UF35-946401
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- Ultra-Fab Products
Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.
Features:
- Supplies a receiver opening at the rear of your motor home for hitch-mounted accessories like bike racks and cargo carriers
- Do not use for towing
- Bolts to the top of your RV's bumper
- Zinc-plated hardware included
- Sturdy steel construction
- Includes anti-rattle bolts for accessory receiver
Specs:
- Application: 4" x 4" RV bumper
- Receiver opening: 2" x 2"
- Plate measures 6" x 5"
- Bolt pattern: 5" on center x 4" on center
- Weight capacity: 100 lbs
- Do not exceed weight rating of your bumper
- 1-Year warranty
Notes:
- For use with hitch-mounted, RV-approved accessories only. Not rated for towing.
- Not for use on decorative aluminum bumper covers.
35-946401 UltraFab RV Bumper Receiver Adapter
Installation Details
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - UF35-946401
Average Customer Rating: 4.7 out of 5 stars (393 Customer Reviews)
Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.by: David 05/08/2024
On the rear bumper of my travel trailer it has carried 2 non-electric mountain bikes using a Swagman bike rack for 10,000 highway miles with no issues. I shimmed the receiver channel and drilled and safety wired the slop bolts. So far so good and I don't fore see any future issues as I haven't had to mess with it since installation..
by: Richard03/03/2024
It fit the bumper perfectly but my bike rack wouldn't fit without reworking it.
by: Bob R. PSL, FL10/03/2014
I ordered and received two of these hitch receivers and installed them on the rear bumper of my camper to carry my 150 cc scooter. Shipping was great and parts mounted without any problem. All hardware was included and fits perfect. Have purchased other items from etrailer previously and look forward to additional items in the future. This company is great to deal with.
Bob.r
8/28/2015
No problems at all. Used it several times already and works great. I mounted them at the frame extensions.
by: Pat02/01/2019
I’m using this receiver a little differently than it’s intended purpose. After getting some longer bolts and drilling holes in some aluminum angle stock, I mounted it to the tongue of our trailer. Now I have a place to store the head of our weight distribution hitch when it’s not on the truck. I just slide it into this receiver and it’s up, out of the way instead of taking up room in a storage compartment or sitting on the ground. I have a locking hitch pin I can use for added security. A simple and cheap fix.
by: Barry07/02/2023
I ultimately had to return this item outside of the etrailer.com return window, but UltraFab exchanged the product with no problems. Currently using it on my rear bumper with a license plate frame holder.
by: Ben W04/06/2017
Fits great on the 4" bumper on our motorhome. Seems very sturdy and should work great for our 2 bike rack, without interfering with the trailer hitch.
I'd probably give it 5 stars, just haven't gotten to use it yet.
by: Zachary08/20/2020
Ise this item on my travel trailer to keep my hitch out of the way,off the ground. Love it to store it so I don’t kick it on the ground.
by: David05/30/2021
I looked at several options for attaching a bike rack to my camper and this was what I wanted. I looked at several similar items on Another online retailer that had complaints about the receiver falling off because of faulty welds. I am quite certain that this product won’t come apart, in fact, you could probably pick the whole camper up by it. It is built like a tank, and is incredibly easy to install. It was more expensive than the junk on Another online retailer, but I won’t be worrying about my bikes falling off going down the road
by: Randy 07/15/2023
It works great I put a bike rack on it and it is fine .
by: Jeremie06/04/2023
Has held up well on camper to hold bike rack and a carrier.
by: Larry06/01/2018
I placed my order and had my part within a week. Now we can take our bikes with us wherever we go. Just moved the spare tire over and bolted the reciever right on. Thanks guys.
by: Bruce B05/17/2012
This product was very easy to install and will be perfect for holding our bike rack. Very heavy duty for the price, excellent quality.
by: Rob10/09/2013
Exactly what I ordered and on time. E trailer is where I go to get stuff for my camper.
by: Bruce08/30/2015
This was the product I needed to store an accessory from my truck on my fifth wheel camper bumper while not in use. I actually mounted this "vertical" to store my motorcycle carrier "out of the way". I could see mounting this normally to carry light weight accessories while trailering my fifth wheel.
Bruce
8/29/2016
After a year, product is still what I wanted and doing what I needed. Actually moved to a new fifth wheel in December and brought this forward to the new camper. Very handy!
by: Randy05/22/2013
I received this product and immediatley installed on my camper bumper, while installing I found two of the 4 lock nut would not screw on to the "U" bolts provided. I then found two of the same size nuts in my toolbox and completed the install. After inserting the bike carrier one of the "U" bolts broke off, It looks as if the "U" bolts are made of a cheap material.I had to purchase a "U" bolt from the local hardware store to replace the broken one. I don't know if I would recommend this to anyonebecause of the faulty "U" bolt.
Randy
5/22/2014
After replacing the cheap U bolts with new ones, so far the product is work well.
by: Tony M.10/01/2014
I got this product our RV rear bumper to put a bike rack forour two bicycles and I'm very happy with the hitch receiver it is well made and great item that I needed to carry our bike.I highly recommend this hitch receiver.
Tony M.
10/1/2015
Great just what I wanted and needed, it was a easy installation and Im very happy with the results, thank you again for this great product I strongly recommend this product.
by: David01/30/2018
Thank you
Received my bracket on time, great quality, easy to install, exactly what I was looking for.
Recommend this bracket to any RV person wanting to transport bicycles. Receiver is perfect for my Yakima bike rack...
David
1/30/2019
Its Great! Thank you....
by: Jim O06/22/2016
This product was perfect to attach to my hard shell trailer for our bike rack.
etrailer did a great job from the ordering process to delivery. Thanks for having a great process set-up to buy from you!
Jim O.
6/22/2017
Your product has worked out very well, the metal gauge thickness is very strong!
by: RoseyDazey 05/15/2017
Very happy with the product we purchased for our RV. It fit perfect, and now we can transport our bicycles when we go camping! Now we don't have to take up space inside the RV or the back of the truck!! See attached photos.
by: Rich Z.02/19/2017
They worked great for adding a platform and toolbox onto the back of my travel trailer. I know I couldn't have fabricated and added the hardware for the price!
Rich Z.
2/19/2018
Been a year and lots of miles with bumps and potholes but the brackets have remained tight and working like they should. Thanks
by: Frank W.08/10/2014
Attached easily to the back of my camper and my bike rack slipped right into the receiver. Overall, a good buy that met my needs.
Frank W.
8/10/2015
Great!
by: Teresa Morris02/14/2017
This is the 4th item I have purchased from etrailer, as usual a quality product at competitive price, very helpful customer service and on point shipiping, If etrailer has it I will purchase it from them
Teresa M.
2/20/2018
Have ordered several items from etrailer and all are quality items that are working the same as the day I received them.
by: Don 10/23/2016
Works just like it should. Just finishing using to go to VA and ride the Creeper trailer. Used just like to carry our bikes to Alaska and back
Don
10/24/2017
Still providing good useage. Glad I purchased it.
by: Doug09/29/2018
Great value. Low price with high value. Bolted right on. Would recommend. Installed on rear bumper of a 2014 Salem 24 cruise light.
Douglas R.
10/13/2019
All good.
25
393
Show More Reviews
See what our Experts say about this Ultra-Fab Products RV and Camper Hitch
- Mounting Ultra Fab # UF35-946401 Under BumperIt is acceptable to mount the Ultra Fab # UF35-946401 underneath the bumper. Make sure the 200 lb capacity of the receiver or the capacity of the bumper (whichever is lower) is not exceeded. This receiver is meant to mount to a 4 inch Steel RV bumpers, and not to a car or truck. It is not intended to be used for towing purposes.
view full answer... - Bumper Mounted Hitch Recommendation for a 2017 Starcraft Satellite 17RB Travel Trailer As long as the 4 inch square bumper on your 2017 Starcraft Satellite 17RB travel trailer is made of steel and welded its entire length then you would need hitch # UF35-946402 because it is the model for 4x4 inch bumpers. I have linked a video of this hitch for you. The combined weight of your carrier and the tote tank isn't very much but you will still want to check the trailer literature to make sure that the bumper is rated for carrying weight and. if so, the amount of weight it can handle.
view full answer... - Rear Bumper Hitch Solution for 4 inch Bumper with Limited Clearance Above BumperDue to the limited clearance you have above your rear bumper you'd need to install a bumper hitch that hangs below the rear bumper like the Buyers Products # 3371804060 as the # UF35-946401 needs to install above the rear bumper.
view full answer... - Options to Maneuver a Travel Trailer for Set-Up/Parking Without BackingWe do have a selection of bumper mounted bolt-on hitch receivers such as the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 that fits a 4"x4" bumper and then provides for a 2" receiver; although this is not designed for the type of use you are describing. My suggestion is to consider the Trailer Valet XL Trailer Dolly with Chain Drive with 2" Hitch Ball, # TVXL2 or if needed, 2-5/16" ball in # TVXL25. This heavy-duty dolly with integrated drive will help you maneuver your trailer into...
view full answer... - Frame Mounted Trailer Hitch for Travel TrailerWe do indeed offer some hitches that are designed to bolt to the frame of your travel trailer. If the frame members on your travel trailer are between 18-51 inches apart, the Curt Hitch # C13701 would be an excellent choice, with it's tongue weight capacity of 500 lbs. For frame members between 22-72 inches apart, use the Curt Hitch # 13703, which has a tongue weight capacity of 350 lbs.
view full answer... - Trailer Hitch Receiver and Bike Rack for Use on 2007 Jayco Jay Feather 19H TrailerThe best hitch type for your 2007 Jayco Jay Feather 19H Trailer will depend on its construction, specifically its bumper. I checked the Jayco website for details about its bumper but no information is offered. So, you'll just want to check your owner's manual for information and guidance related to mounting an accessory hitch. If the bumper is a 4-inch square type then you can use a bolt-on hitch like the Ultra-Fab 2-Inch Motor Home Trailer Hitch Receiver for 4 x4-Inch Bumpers, part #...
view full answer... - Trailer Hitch Recommendation for Prowler Fifth WheelBest solution we'd have is the Curt Multi Fit hitch part # 13703 which fits frame widths between 22 and 72 inches apart (outside to outside) and fits all frame styles. Only issue is this is a Class III hitch and we don't have any Class IV or V hitches available that are similar. This has a capacity of 3,500 lbs trailer weight. I attached an install video for more info for you to check out as well.
view full answer... - Recommended Frame Mounted Trailer Hitch For A 73" Frame Width On A Springdale Summerland 2600The only hitch we currently carry that would fit a 73" frame width is the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames Item # UF35-946403. It is a weld on and has a tongue weight capacity of 350lbs. It is not rated for towing. I do not recommend using any bumper-mounted hitch receivers like the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" BumpersItem # UF35-946401 you linked to unless you know the weight capacity of the bumper.
view full answer... - Will the Ultra-Fab 2" Motor Home Trailer Hitch Receiver Work for Motorhome Tire CarrierThe Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers part # UF35-946401 has a 200 lb weight capacity so as long as the weight of the spare tire carrier and spare wheel/tire do not exceed this you will be good. That said, you also need to take the bumper's weight capacity into consideration and abide by the lowest rated component. There isn't any reason you couldn't use this for a motorhome wheel/tire so long as you be mindful of your capacity.
view full answer... - RV Bumper Hitch Recommendation that Can Mount Below Bumper I have a solution for you, but the RV Bumper 2" Trailer Hitch Receiver # S64025 that you referenced can only be used with the hitch opening on top of the bumper. Instead you would want the Ultra-Fab 2" Motor Home Trailer Hitch # UF35-946401. This hitch can be used with the opening on the bottom of the bumper. Be sure not to exceed the weight capacity of your bumper, check the owners manual of your vehicle for more info on that.
view full answer... - Trailer Hitch for 1995 Chevy G20 VanThere is a hitch receiver that could work for your 1995 Chevy G20 van, so long as your van does NOT have a step bumper. If so, I recommend the Draw-Tite # 75121 hitch, this is a 2" hitch that is a complete bolt-on installation so there will be no drilling required in your Chevy's frame. I have added a link to a video of this hitch being installed on a '94 van for you to check out so you can see the process involved.
view full answer... - Can the U-Bolts On the Ultra-Fab Motor Home Trailer Hitch Receiver Be TurnedThe Ultra-Fab 2" Motor Home Trailer Hitch Receiver part # UF35-946401 has a bolt hole spacing of 5" front to back and 4" side to side so it does not sound like it would work for you. However, we do have the Stromberg Carlson 2" Motor Home Hitch Receiver part # BA-100 which has a bolt hole spacing of 5" front to back and 5" side to side so it does sound like it would work for you although I am not quite sure of the intended purpose.
view full answer... - Why Cant the Bumper Mounted Hitch Recevier UF35-946401 Be Installed on Decorative Bumper CoverThe Ultra-Fab 2 Inch Motor Home Trailer Hitch Receiver # UF35-946401 is not designed for use on decorative aluminum bumper covers because the installation of the receiver and the weight of the accessory used in the receiver would likely damage the decorative aluminum cover. When the bumper cover becomes damaged, the receiver would no longer be installed securely enough on the bumper and could move while a hitch accessory is being used.
view full answer... - Recommendations For Carrying 2 Adult Bikes and 4 Kids Bikes On a Travel TrailerI have a better solution for you, the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 will attach to the front of your travel trailer using the same bolts that hold the tongue jack. This will hold 2 bikes up to 80lbs total on the front of your camper above the propane tanks. If that type of connection will not work for your trailer jack, the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 will bolt to the trailers frame and allow you to use a hitch mounted bike...
view full answer... - Recommended 2 Inch Receiver for Zero Turn Lawnmower Fertilizer SpreaderWe don't have anything like the # 13333 that has mounting holes 10 inches apart. For your application you will need to either customize a fit for that part or use a different style like the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers # UF35-946401 which could be bolted to a strong frame crossbeam for your unique need. Another option is to use the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs # RP7065100 for this custom application.
view full answer... - Cargo Carrier For Camping Trailer Bumper Mount Capable Of Securing Cargo With Sun/Rain ProtectionIt sounds like you are looking for a enclosed carrier like the GearDeck 17 # H00604 as we do not have a cover for the 24x40 etrailer Cargo Carrier # e99050. The GearDeck carrier will allow you to protect your generator and other gear from the rain and sun. You are able to Lock # 131D the lid for the carrier as well to add security to your gear. You will need a Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers # UF35-946401 to slide the carrier into as it is designed to...
view full answer... - RV Bumper Hitch Recommendation Where the Hitch Opening is Below BumperI have a solution for you, but the RV Bumper 2" Trailer Hitch Receiver # S64025 that you referenced can only be used with the hitch opening on top of the bumper. Instead you would want the Ultra-Fab 2" Motor Home Trailer Hitch # UF35-946401. This hitch can be used with the opening on the bottom of the bumper. Be sure not to exceed the weight capacity of your bumper, check the owners manual of your vehicle for more info on that.
view full answer... - Clamp On Fifth Wheel Bike Rack Options for eBikesI am happy to help you find the right bike rack set up for your fifth wheel trailer. Unfortunately, the Hollywood RV Rider # HLY64FR requires a receiver with at least a 350 lbs. TW capacity. It is not compatible with Bumper Mounted Hitch Receiver Adapters (see photo below), but it is specifically designed to support heavier bikes such as your 2 ebikes. We do not have a bike rack available that is compatible with Bumper Mounted Hitch Receiver Adapters and can support heavier E-Bikes. As...
view full answer...
- Recommended Hitch Solution for Carrying Bicycle on Rear of RV with C-Channel BumperThe Curt # E-3S hitch you mentioned is recommended for use on a truck step bumper, as shown in the provided diagram. A bolt-on hitch like the Ultra-Fab # UF35-946401 would be a better choice. This hitch is designed to fit bumpers that are up to 4-1/2 by 4 inches. The bolt on receiver has a 200 lb capacity, but you'll need to check with the RV manufacturer to determine the capacity of the bumper. You'll need to abide by whichever capacity is lowest. I'd also recommend using a bike rack...
view full answer...
- Recommended Cargo Carrier and Hitch for Rear of Travel TrailerWe do not offer a bolt-on cargo carrier, but you could certainly use a hitch mounted carrier. The first step would be to install a hitch like the Curt # E-100. The hitch is compatible with 4 inch square bumpers, and offers a 350 lb tongue weight capacity, which means that the weight of the carrier used plus the weight of the gear carried upon it could weigh no more than 350 lbs. Because of the extended distance between the rear axle and the back bumper of the average travel trailer, anything...
view full answer... - Solutions for Towing Forest River Roo Travel Trailer and Carrying Bikes SimultaneouslyThere are a few different options that might work for you. A towing bike rack can be a good option depending on the tongue weight of your camper. The Curt # C18013 used in conjunction with an extra long ball mount like # 2736 or # D-28 (choose the one with the rise or drop you're needing) might be a good option, but keep in mind that the tongue weight capacity of the hitch would be reduced by the weight of the rack and the bikes. For instance, say the three bikes weigh 100 lbs. The rack...
view full answer... - Recommended Bike Rack for Trailer with Tilting Bumper Mounted Spare TireFor your camping trailer that has a tilting bumper mounted spare tire, I recommend looking at an RV approved hitch-mounted bike rack like the Swagman Dispatch 2 Bike Platform Rack # S44FR. This will slide into a 2 inch trailer hitch receiver and hold 2 bikes of up to 45 pounds each. When the bikes are unloaded from the carrier, the upright mast can be folded down to allow you to tilt back the spare tire on your trailer for rear storage access. This carrier also includes a hitch and cable...
view full answer... - Alternate Mounting of Ultra-Fab 2" Motor Home Trailer Hitch ReceiverI contacted the Tech Rep at Ultra Fab Products, they stated that it can be mounted underneath but they do recommend it on top. The Ultra-Fab 2" Motor Home Trailer Hitch Receiver, # UF35-946401 is designed, tested and weight rated for an installation of weight setting above the bumper not below. Any alternate installation of product is determined by the purchaser with that understanding. They added that if you are going to be installing a bike rack on the hitch, be sure to pay very close...
view full answer... - Installation of a Ultra-Fab 2-Inch RV Trailer Hitch Receiver Part UF35-946401 on a 4-Inch BumperYou are correct. The Ultra-Fab 2-inch motor home trailer hitch receiver # UF35-946401 is designed to bolt around a 4-inch RV bumper and the receiver opening will be on the topside of the bumper. This receiver is designed for mounting accessories like a bike rack, and not for towing purposes. It has a 200 pound capacity. Make sure you do not exceed the weight rating of your RV bumper. So if the bumper has a lower weight rating, you will want to go by the lower weight rating.
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Lindsey S
Video Edited:
Jacob T
Installed by:
Kathleen M
Installed by:
Randy B
Installed by:
Conner L
Installed by:
Michael B
Updated by:
Wilson B
Updated by:
Halie H
Updated by:
Eric H
Video by:
Zach D
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark H.
8/24/2015
Did you end up having any problem with the weight of the scooter breaking the bolts..? I am buying 2 to do something similar...making a carrier for my generator and plan on using 2 hitches...