RV Bumper 2" Trailer Hitch Receiver - Clamp-On
(123 reviews)
Price: $45.00
In Stock
RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Item # S64025
Retail:$67.71
Our Price: $45.00
You Save: 34%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (123)
- Q & A (0)
- Photos
Swagman RV and Camper Hitch - S64025
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 4-1/2 x 4-1/2 Inch Bumper
- 4-1/4 x 4-1/4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- Swagman
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.
Features:
- 2" Hitch receiver opening to accommodate hitch accessories
- Solid steel construction
- Powder coated to resist corrosion
- For use with up to a 4-bike non-folding, standard bike rack
- Not to be used for towing or with cargo carriers
- For use above the bumper only
- Never exceed the bumper's stated capacities
- Attaches to bumper using 4" bolts (included)
Specs:
- Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers
- Not for use on aluminum or spot-welded bumpers
- Load capacity: 200 lbs
- Distance from the center of hitch pin hole to end of receiver: 3"
- Mounting plate measures 6" x 6"
Note: Not to be used with an adapter or extender.
64025 RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
RV Bumper 2" Trailer Hitch Receiver - Clamp-On - S64025
Average Customer Rating: 4.8 out of 5 stars (123 Customer Reviews)
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.by: Clark C09/07/2022
Hold up well after 160 miles camping trip. Mounted at 4” rear bumper of my camping trailer to accomodate 2 bike rack. I only carry 1 bike for the trip. Solid and well secured using provision screw that you need to tightened once bike rack is mounted to avoid movement when driving.
by: George 02/12/2024
Very happy with the item. Well-made, and fits my RV bumper.
by: Jimbo09/01/2014
Very pleased with this product it's robust and solid, the bolts and lock nuts are high quality. Ordering and shipping were easy and fast. The part fit perfectly I used some gasket material to protect the bumper, would have liked to have the torque specs on the nuts. I use a Thule bicycle rack and this hitch allows me to bring along the bikes on my 5th wheel.
by: Lazy Creeks06/30/2018
Great vendor, great product.
We have 6 trailers at our home; 2 boat, 1 tandem utility, 3 single axle utility that need to be moved around frequently for space reasons.
Airports need to "push back" planes from their gates for which the "tugs" have hitches on their front bumpers. That arrangement allows greater steering control than if their hitches were mounted on the rear of the "tugs". So, I've mounted this wonderful hitch to the front bumper of my '86 Isuzu Trooper II 4-wheel drive which I use to position my trailers. Of course it's NOT safe for highway travel, but as a positioning aid, it is superb. Also; etrailer communications and speed of delivery cannot be improved. Don't change anything, etrailer.
by: Kevin 06/17/2020
I'm using this to mount a pretty large and heavy 4-bike rack to the rear bumper of my camper. This thing is stout. It has nylock nuts so I don't have to worry about the nuts backing off. Also has a threaded bolt hold in the side w/ bolt so that you can snug up whatever you put in the receiver (bike rack, etc.) to keep it from swaying. I really like that feature.
by: Michael J04/23/2014
Opened the box and was immediately impressed by the construction quality of this bike rack receiver. Easily installed on the bumper of our trailer and again, I was very impressed with the sturdy bolts, back plate and receiver. Too bad Swagman doesn't make one of these for my inferior spare tire holder.
Michael J.
4/23/2015
This is a great product, period! Perfect match for my 4 trailer bumper and my bike rack. But more importantly is the quality service I receive from etrailer. They are a great source for everything you could possibly need for your trailer or RV. Ive ordered several items from them and the quality is always 5 Star! Cannot say enough good things about their customer service. They are 5 Star from top to bottom. They set the standard for customer service and products.
by: John 06/09/2020
Luck was on your side for a nice piece of furniture for my trailer. The package arrived ok but when I went to open it -- I had no trouble. The shipping expert had forgotten to tape the box on the lid!!! Thankfully because the connector was tightly packed, it did not fall our and break someones foot or get lost and thrown in the trash.
John
6/11/2021
Like it is supppose to!
by: John M.08/05/2015
The RV Bumper Hitch Receiver is of great quality and is easily installed. I used it to mount to my trailer steel bumper so I can carry my bikes which mount on a receiver type rack.
John M.
8/16/2016
All three of these products have held up well and performed well. Thanks.
by: Patricia09/18/2018
Swagman hitch fits securely on our 4” trailer bumper. Our standard bike rack works fine on the hitch. I have had several campers ask me where I got the bumper hitch and have recommended etrailer for their solid customer service
by: Jim S.03/17/2017
The Swagman RV Bumper 2" Trailer Hitch receiver is a very solid hitch receiver especially for the Swagman Dispatch 2 Bike Platform Rack - 2". Along with the threaded pin from the bike rack and the set bolt on this receiver there is no play or movement in the receiver tube. My bumper is 4" square and will require spacers on the back side to fully secure, minor issue.
by: Glenn03/12/2018
Etrailer service is always top notch with fast shipping. They are my go-to whenever I need parts or service items on my RV's trailers or truck.
About this hitch. Easy to install & does the job. Needed it to carry bikes on the back of our travel trailer. Due to ground clearance as you leave some gas stations, I would not mount it below the bumper you may drag the bikes on the ground. In fact they say not to bolt it underneath the bumper due to the limits of the bolt strength. So for what it is intended for, it's a great solution.
by: Mike07/06/2016
Purchased to fit on my RV bumper for bike rack/cargo carrier. Installation is as basic as you can get. I was surprised that the bolts were grade 8, but there were no washers. See no reason why it won't work very well.
by: Jay W.12/06/2017
RV Bumper Hitch attachment: Works perfect! I use two, one on each end of the bumper to attach flag pole holders. Have already had comments about the product and the professionalism of the staff and the quick mailing was impressive!
Installation was simply bolting the product onto the bumper, how easy is that!!??
No more use of U-Bolts and or having to weld pipe onto the RV in order to flag my NASCAR flags at the track(s).
Do not be doubtful of this product!! Get yourself one or two!! Thanks etrailer!!
by: Charles M05/18/2018
I ordered the Swagman RV hitch s64025. Upon receiving the hitch early Wednesday afternoon, I opened the box and noticed that the bottom plate was missing. I immediately called etrailer and spoke with Crystal. She was sympathetic and totally understanding of my situation. She immediately placed an order for a replacement. I received the replacement hitch early Friday afternoon. I'm just waiting for instructions to return the old hitch. The original box may have been opened somewhere during shipment--I can't be sure. However, I would not hesitate ordering anything from etrailer. I ordered other items as well and they all arrived on-time and in good condition. A big Thank you Crystal, and I would be remiss if I didn't thank Reesa, and Tiffany for their help in placing other orders. This is what I call a Five-Star customer oriented company--nothing short of OUTSTANDING!!!
by: Tom A.10/11/2014
I installed this item to mount the Prorack 2 bike rack on the bumper of our new trailer so that we could conveniently carry 2 lounge chairs. It was nicely fabricated and finished, and installed easily with the hardware included. I'd have given it an "excellent" rating, but I'm not sure that there won't be some future corrosion issues with the bolts provided due to the type of surface treatment. However - with this stated - I'd definitely consider purchasing this item again to meet a similar need in the future.
by: Andrew 09/03/2020
Good product, reasonable price, easy to find on etrailer. Just what was needed to add a bike rack on the rear bumper of our travel trailer. Just as advertised, works fine, seems strong enough - though time will tell. Arrived in good time, as predicted.
by: Doug 09/22/2022
Works great on travel trailer tube bumper. As cheap to buy rather than making it
by: Mark 09/08/2022
Had it for a year now it’s holding up perfectly, still looks like new. I use it for my bike rack and it works great.
by: Don S.03/06/2017
This clamp on hitch receiver arrived in only a couple of days although I live in Southern Ontario Canada. The finish and welding on this product are excellent. I will use it for attaching a bike rack to the rear bumper of our new travel trailer. I purchased the bike rack some months ago from etrailer. That was also very good customer service experience.
by: Dave 05/14/2020
Just right to add a bike rack, not load rated to add a trailer.
Would prefer locking nuts, but easy to find at hardware store.
by: Fred B.06/20/2016
Perfect for my new RV. I like the all black finish, bolts included, that goes well with the black bumper. It will be used for a two bike carrier and looks to be rugged enough, I'm sure it is, and time will tell. I think it will be great.
by: Gareth M02/21/2017
This hitch was the perfect way to mount my bicycle rack to the rear of my trailer. We have used it several times in the last year with no problems. It was easy to install.
by: Jeremy06/01/2020
Been using this for a year on our camper bumper for bike rack. So far so good!
by: Elwood07/25/2015
Received the product and installed it today - easy installation. I have another hitch receiver that I bought years ago, but it's at our home in Florida and we're currently in Ohio. This one is much better quality, but also cost over twice as much. While we won't be leaving to head home for a month, I foresee no issues with this receiver handling the bike rack and two bikes.
by: Charles S.12/06/2015
Bolt-on 2" receiver for bike rack on RV bumper. Wow! Excellent quality, super construction, welds & finish, easy install. AND fast delivery. Thank you etrailer!!
25
123
Show More Reviews
See what our Experts say about this Swagman RV and Camper Hitch
- Hitch Options for Carrying Bikes on Rear of 1989 Prowler Travel TrailerSince all the RV bumper hitches we offer only fit up to 4 inch bumpers, your best bet would be to go with a frame mounted hitch. The hitch you need will depend on the outside-to-outside dimension of the frame members under your travel trailer. If the outside to outside width is between 22 and 72 inches, the Curt # 13703 would be an excellent choice that has a tongue weight capacity of 350 lbs. If the outside frame member to frame member distance is less than 22 inches, the Curt # C13701...
view full answer... - RV Bumper Hitch Recommendation that Can Mount Below Bumper I have a solution for you, but the RV Bumper 2" Trailer Hitch Receiver # S64025 that you referenced can only be used with the hitch opening on top of the bumper. Instead you would want the Ultra-Fab 2" Motor Home Trailer Hitch # UF35-946401. This hitch can be used with the opening on the bottom of the bumper. Be sure not to exceed the weight capacity of your bumper, check the owners manual of your vehicle for more info on that.
view full answer... - How to Attach a 1-1/4 Inch Hitch Bike Rack to a RV Bumper HitchI would recommend to use the Brophy Hitch Reducer, part # HT02. This reducer will insert into a 2 inch hitch receiver on your RV and allow you use your 1-1/4 inch hitch bike rack. It will extend out from the original hitch pin hole an extra 3 inches. Hopefully, an extra 3 inches would not cause you any problems. It comes with a 1/2 inch pin and clip for the hitch accessory, but you will also need a Hidden Hitch 5/8 Inch Pin and Clip, part # PC3 to attach the reducer to the hitch. There...
view full answer... - Compatibility of RV Bumper Platform Cargo Carrier on 4-1/2 Inch Square BumperFor your 4.5 Inch bumper with little clearance, the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs # MNT54FR will require about 1-1/2 inches of clearance on the back side of the bumper for mounting. If you don't have that kind of space, then I recommend using the RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 which will require 7/8 inch between the bumper and RV. Then you can use a cargo carrier like # PS1040100 but you will be restricted...
view full answer... - Travel Trailer Hitch RecommendationsOnly certain bike racks are rated for use behind an RV/trailer. The reason is for that is because they have a much rougher ride present there when compared to a vehicle. You would need to contact Allen with the model of your bike rack to determine if it would be rated for use on a trailer. That we are aware of none of their racks are rated for this. I attached a link to a page that has all of the RV bike racks we offer. For a bumper mounted hitch for your 4 inch bumper I would recommend...
view full answer... - Trailer Hitch Recommendations For A 4-1/2" RV Bumper For 4-1/2" x 4-1/2" RV bumpers we offer the RV Bumper 2" Trailer Hitch Receiver # S64025 as a possible option, but you'd be limited to only 200lbs of tongue weight. You'll also need to verify how much the bumper is actually rated for. We also carry adjustable trailer hitches that mount to the frame of the trailer like the Curt Adjustable Width Trailer Hitch Receiver for RV's # 13703, which can fit frame widths from 22" to 72" wide. You'll just need to measure the distance inside of your...
view full answer... - Can the Roadmaster Dual Hitch Receiver Be Used to Tow a Trailer and Carry Bike On a Bike RackThe Roadmaster Dual Hitch Receivers, like the # RM-077-4 that you referenced, are not designed for use with any type of trailer. They are designed for use with tow bars only. I recommend installing a hitch on the back of your RV. If your RV has a 4 x 4 inch continuous-welded steel bumper, you could use the RV Bumper 2 inch Trailer Hitch Receiver, item # S64025, along with a bike rack that is designed for use behind an RV. The Swagman Dispatch Bike Rack, item # S44FR, would be a good choice. If...
view full answer... - RV Bumper Hitch Recommendation Where the Hitch Opening is Below BumperI have a solution for you, but the RV Bumper 2" Trailer Hitch Receiver # S64025 that you referenced can only be used with the hitch opening on top of the bumper. Instead you would want the Ultra-Fab 2" Motor Home Trailer Hitch # UF35-946401. This hitch can be used with the opening on the bottom of the bumper. Be sure not to exceed the weight capacity of your bumper, check the owners manual of your vehicle for more info on that.
view full answer... - Availability of RV Bumper Trailer Hitch Receiver and Bike RackAny of our RV and motor home bike racks, see link, with a 2 inch shank will work with the RV Bumper 2 inch Trailer Hitch Receiver with Anti-Rattle - Clamp-On, part # S64025. Please be aware that the springs on a camper are very different than those on a vehicle, and the bikes will be jarred quite a bit. No matter which bike rack you choose, you will need to be sure to secure the bikes with bungees to prevent damage to the bikes, rack, or your camper.
view full answer... - Comparing Swagman RV Platform Bike Carrier # S64663 and XTC-2 2-Bike Platform Rack # S64670You are correct that Swagman Platform-Style 2 Bike Rack # S64663 does include both an RV-rated 2-bike rack as well as a bumper-mount RV hitch receiver that installs on a continuously welded 4- to 4-1/2-inch tall steel RV bumper. Part # S64025 is just the RV hitch itself. Swagman XTC-2 2-Bike Platform Rack # S64670 does fit both 1-1/4-inch and 2-inch hitches however this rack is NOT rated for use on the back of a trailer. Swagman offers their Dispatch 2 Bike Platform Rack # S44FR that...
view full answer... - Can Bumper Mounted Trailer Hitch Be Used To Pull Tow Dolly Loaded With A VehicleIf you use a bumper hitch like part # S64025 on your RV, it needs to have a bumper that has a continuous weld and not just in two places on the frame. I recommend using a motor home trailer hitch like part # 82201. This bolts or welds to the frame of your RV and provides a 2 inch receiver opening at the back of your RV. This hitch adjusts from 47 to 71 inches wide and has a gross towing capacity of 3,500-lbs. Since you plan on doing some towing you might be interested in etrailer ball...
view full answer... - Could Swagman RV Bumper Mount with Hitch Opening Vertical for Carrying FlagThere's no reason you couldn't mount the # S64025 in a vertical position to use it like you are wanting to.
view full answer... - Hitch Recommendation for 2003 Newmar Kountry Star Class A MotorhomeWe offer both frame-mount and bumper-mount trailer hitches for use on the rear of a motorhome like your 2003 Newmar Kountry Star Class A. The bumper-mount hitch you referenced, Swagman # S64025, is intended for bumpers that are continuously-welded across their entire length. This hitch can be used only with an RV-approved bike rack. It cannot be used for towing or with cargo carriers. The link provided will let you see all available bumper- and frame-mount RV hitches. For a frame that...
view full answer... - Capacity of Clamp-On RV Bumper 2 Inch Trailer Hitch Receiver # S64025 with Anti-RattleThe limiting factor is not the capacity of RV bumper hitch # S64025. The main issue is the capacity of the bumper. You will need to contact the RV manufacturer to find out the specifications for your bumper. Also, you will have to be certain you have the right bumper, as this hitch is designed exclusively for 4 inch by 4 inch continuous-welded steel bumpers. This adapter is not compatible with aluminum or spot-welded steel bumpers. There is no drilling required, as the hitch slips over...
view full answer... - Rack with 4 Bike Capacity Needed for Rear of a Salem RVWe do offer bike racks that can utilize the ladder on the rear of the trailer, like the Stromberg Carlson 2 Bike Carrier, part # LA-102. Unfortunately, these racks only have a two bike capacity. Depending on the size and construction of the rear bumper, a bumper mounted receiver like the Swagman part # S64025 would be a good option for a 4 x 4 inch continuous-welded steel bumpers. This receiver is not compatible with aluminum or spot-welded steel bumpers. Using a bolt on receiver would...
view full answer... - Weight of Swagman Bike Rack for RV Bumpers with Bumper AdapterThe Swagman Platform Rack for 2" Hitches of RV Bumpers # S64663 weighs 36.1 lbs. The RV Bumper 2" Hitch Receiver Adapter # S64025 weighs 9 lbs. The total weight for the rack and the bumper adapter is 45.1 lbs. I attached videos below reviewing the bike rack and showing how to install the bumper adapter if you want to check them out. With this bike rack, I recommend upgrading to the anti-rattle hitch lock # S64030 so you can lock the bike rack to your vehicle. When using the bumper adapter,...
view full answer... - Can Swagman Bumper Mount Adapter Mount Underneath BumperI spoke with my contact at Swagman and was informed that the RV 2 inch Receiver Bumper Mount Adapter, # S64025, cannot be mounted underneath of the bumper because the bolts included with the receiver are not designed to handle the tongue weight required of it in that position. One option we have for mounting a receiver under the bumper of your camper is the RV Bumper 2 inch Trailer Hitch Receiver, # E-100. However, you cannot exceed the limits of your camper bumper. The bumper towing...
view full answer... - Recommended Bumper Mount Receiver for Travel TrailerAs long as the bumper is not aluminum, and the seams on the bumper are continuously (not spot) welded, a bumper hitch like those you mentioned can be used. You will also need to ensure that the bumper is rated to handle the weight of the bikes plus the rack. Of the three, I would recommend the Curt # E-100 because of its higher capacity and tougher construction. You do not mention which bike rack you are planning on using. You will want to be sure to use a bike rack that is approved...
view full answer... - Can the Swagman Platform-Style Bike Carrier # S64663 Hold a 26 Inch or a 29 Inch Bike WheelThe Swagman Platform-Style 2 Bike Carrier, # S64663, will handle most 26 inch and 29 inch bike wheels. To verify if this bike rack will hold your bikes, I recommend measuring the wheel base of your bikes. The wheel base is measured from axle to axle on the bike. This bike rack can handle wheel bases up to 52 inches long. It also has a weight capacity of 40 lbs per bike and the wheel loops will fit wheels up to 3-1/2 inches wide. I have attached the installation instructions for you to...
view full answer... - Is it Safe to Carry a Bike Rack and Bikes with Swagman Specialty Trailer Hitch, # S64025It is safe provided that the bumper and trailer are rated for this type of application. You will need to find out the weight capacity of the bumper and if there are any restrictions on what you can carry on it using the Swagman Specialty Trailer Hitch, # S64025. Another option would be to install a frame mounted trailer hitch to the trailer. I recommend the Adjustable Width Trailer Hitch, # 13703, because it fits frames from 22 to 72 inches wide, and box, I-beam, or C-channel frames. I...
view full answer... - Recommendation for a Trailer Hitch that Mounts to a Bumper Pull HitchIt sounds like you are describing a bumper hitch with a ball. What you can do is remove the ball and install Curt Bumper Hitch, # E-3S. This will provide a 2 inch trailer hitch receiver that you can use with a hitch mounted bike rack. I have included a link to the installation details for the hitch. If you have an RV or trailer that has a 4 inch square channel bumper, you could use RV Bumper Trailer Hitch Receiver, # E-100. Or, if it is a 4 inch square continuous welded steel bumper, you...
view full answer... - Hitch Option Recommendation for Travel Trailer with Aluminum BumperWe do not have any hitches we can recommend that will fit around an aluminum RV bumper. Best option we'd have would be a multi-fit hitch like part # 13703 which fits frame widths of 22 to 72 inches and all frame styles.
view full answer... - What Bike Rack Would be Best for a Pop-Up Camper or Collapsible TrailerSwagman has built several bike rack solutions specifically for the rear of Fifth Wheels, campers and trailers. Often times there is much more rear bumper bounce on a trailer or pop-up camper when compared to a passenger vehicle, so Swagman designed some bike racks to withstand the rougher ride. If the camper has a solid steel square tube bumper, you could use something like the Swagman Bumper Hitch, part # S64025 in conjunction with a towing bike rack like part # S64400. Swagman also...
view full answer... - Bumper Mounted Hitch That Will Work With Roadmaster Hitch Mounted Spare Tire CarrierThere is a hitch that will work for you, but the Bumper Hitch Receiver # S64025 that you referenced is for use with bike racks and would not be a fit for your new Roadmaster Spare Tire Mount RM-195225. Instead, I recommend the Ultra-Fab # UF35-946402 which is a 2" trailer hitch receiver that clamps onto 4" x 4" square bumpers and has a maximum tongue weight of 350 lbs, which should be well within the range of the Spare Tire Mount and spare tire. I've added links to a pair of video reviews...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Video Edited:
Zach D
Video Edited:
Jonathan Y
Updated by:
Adele M
Updated by:
Matthew S
Updated by:
Jenny M
Installed by:
Cole B
Installed by:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kevin
6/18/2021
The receiver itself is great. I still have it on my camper. My campers bumper on the other hand was not up to the task of stress that a fully loaded 4-bike rack put on it. The bumper could probably handle 1 or 2 bikes just fine but the rack I have puts too large of a moment on the thin wall square tube bumper.