See what our Experts say about this CURT RV and Camper Hitch

• Is RV Trailer Hitch Available with 10,000 lb Weight Capacity
  If you are looking for a trailer hitch to mount on your RV then the highest rated capacity is the Curt Trailer Hitches parts # C13702 and # C13701 which are both rated for a max of 6,000 lbs towing when a weight distribution (WD) system is used. These are the same hitch with the only difference being the 13701 has a 2" drop for the receiver. We do have the Ultra Frame Service Body Trailer Hitch Cross Tube # 41991 which has a 16,000 lb towing rating but I'm not sure if it would fit your...
  view full answer...
  
• Recommended Hitch for a 5th Wheel Trailer
  No, you are exactly correct. Lots of people don't check to see if their bumper is rated for the Curt RV Bumper Hitch item # C19101 to be attached to it. This definitely will not work with your 5th wheel trailer. You'll want to go with one of our universal options for your 5th wheel trailer, instead. I recommend the Adjustable Width Trailer Hitch item # C13702. This hitch can be bolted or welded to your trailer's frame so long as it is no longer than 51" wide. It has a 500 lbs tongue weight...
  view full answer...
• Recommended Hitch for a 2021 Grand Design Momentum 25G Toy Hauler
  To add a hitch to your 2021 Grand Design Momentum 25G toy hauler you are going to want the Adjustable Width Trailer Hitch Receiver item # C13702. This frame mounted hitch can be bolted or welded on and will fit as long as your frame isn't wider than 51". This is a class III hitch with a 2" receiver and is a universal fit. There are no custom fit hitches for your trailer. You will want to verify what your toy hauler's capacity is but this hitch can provide you with a 500 lbs tongue weight...
  view full answer...
• Trailer Hitch Recommendation for 2023 Jayco Jay Flight 265 RLS
  Hey Kelly, for RV applications like what you have the best option is a multi fit hitch like the Curt part # C13702 which fits the standard frame styles that are between 18 and 51 inches apart. This can be welded or bolted in place too. This would be a much better option than trying to reinforce your bumper. This hitch has a capacity of 500 lb tongue weight as well.
  view full answer...
• Clamp On Fifth Wheel Bike Rack Options for eBikes
  I am happy to help you find the right bike rack set up for your fifth wheel trailer. Unfortunately, the Hollywood RV Rider # HLY64FR requires a receiver with at least a 350 lbs. TW capacity. It is not compatible with Bumper Mounted Hitch Receiver Adapters (see photo below), but it is specifically designed to support heavier bikes such as your 2 ebikes. We do not have a bike rack available that is compatible with Bumper Mounted Hitch Receiver Adapters and can support heavier E-Bikes. As...
  view full answer...
  
• Will the Curt Hitch C15312 Fit a 2009 GMC Cab and Chassis Van?
  It's not designed to. The Curt Trailer Hitch item # C15312 is custom fit for 2001 - 2010 Sierra and Silverado 2500 and 3500s. The width of the bolt holes is the same as the item # 3371801102 as you can see from the dimensional diagrams below. However, nothing else is the same so you would need to do some drilling and there may be other parts like exhaust or braces in the way. The only hitch that is custom fit for a 2009 GMC cab and chassis van is the Buyers Products 2" Hitch Receiver...
  view full answer...
  
• Recommended Motorcycle/Scooter Carrier With Hitch Receiver For Motorhome
  You do not need a bumper to add a hitch and carrier for your scooter. I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702 or the # UF35-946403 which adjusts from 47-1/8 to 77 inches. Either of these hitch receivers will mount to your motorhome frame so a bumper is not needed. This can be used with thetrailer Motorcycle Carrier for 2" Hitches - 500 lbs # e98873 for your scooter. I recommend the Motorcycle Soft Loops # 06303 along with the Erickson...
  view full answer...
• Recommended 2 Inch Trailer Hitch Receiver for a 2018 Jay Flight SLX 184BS
  Yes, in order to carry a bike rack or cargo carrier on the rear of your 2018 Jay Flight SLX 184BS I highly recommend the Adjustable Width Trailer Hitch Receiver part # C13702 which is specifically designed for trailers and RV's and will give you a 2" receiver tube opening. As long as the frame rails on your Jay Flight do not measure to be more than 51" apart outside to outside then this hitch will be perfect for you. Please keep in mind that bike racks used on the back of a trailer will...
  view full answer...
• Recommended Trailer Hitch for Class B Motorhome with Stretched Frame
  I do have an option for you but as the frame has been modified, your only option would be a universal trailer hitch like the Adjustable Width Trailer Hitch Receiver for RVs part # C13702 which can be bolted or welded to the frame. It offers a class III capacity up to 5,000 lbs. The side brackets are adjustable so you can pick the exact width and then you'll need to drill a few holes into the frame to secure it.
  view full answer...
  
• Looking For A Hitch For My 2019 Freightliner UPS Style Van
  Hey Mel, We do not carry a custom fit hitch for that vehicle specifically. What I recommend is going with a universal hitch like the Curt # C13702. This is a universal hitch that fits frame widths from 18" to 51". It is a bolt on or weld on style and gives you a 5,000lb towing capacity with a 500lb tongue weight. I recommend measuring your frame width on the vehicle to make sure this will work. If you need a different size we do carry a variety. Let me know what your frame width measurement...
  view full answer...
• Distance Between Bolt Holes on Curt Adjustable Width Trailer Hitch # C13702
  The distance from the two bolt holes on each side bracket for the Curt Adjustable Width Trailer Hitch Receiver # C13702 is right at 8-5/8" (center to center). I have also attached a diagram to assist. This adjustable hitch will fit frame widths that are between 18" and 51".
  view full answer...
  
• Recommended RV Trailer Hitch For A Newmar Dutch Star Class A Motorhome
  When deciding what trailer hitch will fit your RV best practice is to measure from inside the frame beam to the inside of the other frame beam to get the frame width. If you have a width of 18-51" then I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide Item # C13702. It has a maximum 500lbs TW and 5000lbs GTW. If you have a frame width above 51" then I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. It has a maximum...
  view full answer...
• Recommended Trailer Hitch for a 2019 Mercedes-Benz Sprinter 3500 W/ a 30 5/8" Wide Frame
  Hey Chris, unfortunately all of our custom hitches aren't going to work with the 30 3/8" wide frames so you'd have to use a universal one like the Adjustable Width Trailer Hitch Receiver for RVs # C13702 which can fit frames 18" to 51" wide. This hitch is not a class IV like the Draw-Tite you have, but it still does have the same 2" receiver opening, a 5,000 lb capacity, and a 500 lb tongue weight capacity. Please feel free to let me know if there is anything else I can help you with!
  view full answer...
• Recommended Trailer Hitch and Wiring Harness for a 2003 Ford Thunderbird
  Hey Bobbi, since there aren't any custom fit hitches for a 2003 Ford Thunderbird you're going to have to use a universal one like the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702. This hitch will fit frames 18" to 51" wide, has a 5,000 lb capacity, and can be used with a weight distribution system if need be. If you also need wiring, you're going to want the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. Let me know if there...
  view full answer...
• Best Trailer Hitch, 7-Way Wiring Harness And Brake Controller For 1986 Vandura 3500 Short Bus
  Hey Mark, thanks for reaching out, and cool bus! The Curt # C13016 hitch you mentioned is for the 1978 - 1996 Chevrolet Van which generally excludes the school bus models. What I can tell you is the # C13016 hitch is 40.87" wide from hole to hole, so what you could do is compare this to the frame of your bus. As long as the width is good, the mounting holes are present on the frame and there are no obstructions the hitch can be used. If the width of your frame is different, the Adjustable...
  view full answer...
• Looking For Rear Trailer Hitch With 1,000 lb TW Capacity For Class A Motorhome
  Hello Mike, thanks for reaching out. We do offer a couple universal hitches for RVs but nothing with a 1,000 lb tongue weight capacity. For example, the Adjustable Width Trailer Hitch Receiver for RVs # C13702 will fit frames between 18" and 51" wide. It has a 500 lb capacity. There are universal hitches available with a higher capacity, but those options are intended more for pickup trucks, so we are a bit more limited with the frame width. For example, the Draw-Tite Ultra Frame Service...
  view full answer...
• Trailer Hitch Recommendation for 2022 Forest River 27QB XLR Boost
  Hey Joseph, for travel trailers like your 2022 Forrest River 27QB XLR Boost the best hitch solution is a multi fit hitch like the # C13702 which is designed to fit RV frames that are between 18 and 51 inches apart. Do you have a hitch carrier already as well?
  view full answer...
• 500 lb Tongue Weight Trailer Hitch for 2020 Outdoors RV 21DBS
  Hey Jon, if the hitch has frame channels that are between 18 and 51 inches apart the Curt hitch part # C13702 would be a great fit as this is an RV hitch designed to fit to box or c-channel frames and also has a 500 lb tongue weight capacity like you need as well. Does your bike and rack weigh 500 lb?
  view full answer...
• Do You Make Custom Hitches For My Bus? Looking For A Class 4 Or 5
  Hey Jason, We do not make custom hitches. We do have universal hitches that fit certain frame widths like your 30". The Curt hitch # C13702 is a class 3 5,000lb capacity hitch that would fit the width that you need. We do not have anything higher than a class 3. If you wanted something like that you would need to get one custom fabricated. What are you looking to do with that hitch?
  view full answer...
• Recommended Ball Mount For A 2016 Ford F-350 Towing A 21,000lb Dump Trailer
  The closest option that we have to your needs would be the BulletProof Hitches 2-Ball Mount # HD256. It has a 2-1/2" shank, 7-1/4" drop, 7" rise, and 22,000lbs capacity when using the 2-5/16" ball.
  view full answer...
• Can the Reese Solo Cargo Carrier Be Used on a Keystone Cougar Travel Trailer
  Yes, the 32x48 Reese Solo Cargo Carrier for 2" Hitches # PS1040100 can be used with your 2017 Keystone Cougar Travel Trailer. You are going to need a trailer hitch to use this cargo carrier so you'd need to add one with # C13702 if you don't already have one or you can just use the 24x40 etrailer Cargo Carrier for RV Bumper # e99050 instead which will bolt up to your bumper.
  view full answer...
• Determining The Correct Adjustable Trailer Hitch For A 2022 Grand Design Imagine 2600RB
  The frame not being exposed isn't a big issue since it's just covered up with some corrugated plastic sheeting that can easily be pulled down and cut to fit in accessories. The real issue is going to be with the bumper since it sits right where the receiver tube for the hitch would sit. On top of that the stabilizer jacks look like they'll likely also be in the way so while adding a hitch in wouldn't be impossible, it would require quite a bit of work. I recommend reaching out to a local...
  view full answer...
  
• Dimensions of the Curt Adjustable Width Trailer Hitch 13703
  I checked with Curt and was able to find a couple of diagrams of the mounting bracket and the receiver portion for the Adjustable Width Trailer Hitch Receiver item # 13703. I have attached them below. The width is adjustable between 22" and 72". I have linked an installation video below so you can see how to get this hitch set up.
  view full answer...
  
• Are All RV Hitches for a 2004 Fleetwood Tioga Rated for 3,500 lbs?
  Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of the Tioga's that year because they all have the same listed capacity. The frame on a 2004 Ford E-450 is right around 39" wide. The Adjustable Width Trailer Hitch Receiver item # C13702 you were looking at will fit your Fleetwood Tioga. The hitch...
  view full answer...
  

Do you have a question about this RV and Camper Hitch?