Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement check valve solves your problem with a broken, leaky city water inlet. Feeds into your RV's fresh-water lines with a 1/2" FPT connection. Includes adapter to create a 1/2" MPT connection.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Valterra flush mount water inlet. This conforms with federal and state laws for drinking water fixtures. It's a completely led free design. It's going to feature two and three quarter inch diameter metal flange with aluminum finish. That's going to have three mount holes located on that flange. Your hardware is included.
The mount holes are going to be separated apart from one another on center. That looks to be about one and fifteen, sixteen, seven inch, almost two inches apart on center. It's going to feature a half inch female pipe thread inside connection here on the back, but it does come with the male nipple, if you need to adjust the connection, so that is included if needed. It's going to feature the garden hose swivel fitting that allows for easy connecting and disconnecting. It's got a nice easy grip design with the gripper on there and it's going to come with the press on dust plugs, so that's included. It's also going to have a wire mesh screen to keep unwanted items out and it's going to offer an appropriate seal for leak proof performance. It also comes with the brass check valve.
Installation putty tape and your pipe thread tape. That's going to do it for today's look at the Valterra flush mount water inlet.
Ratings & Reviews
Works great
Excellent part fits like it should
This RV water inlet replaced a plastic unit that had stripped threads.
This one was brass. It fit the original screw holes perfectly.
This will work for a replacement, the base is metal and all items were there for an easy install. Thanks again, eTrailer
Purchased this to replace factory water inlet fitting that leaked in both directions.
Factory piece had plastic threads for the hose end, this piece has metal threads. Came with screws and putty, replaced the factory unit perfectly! No more leaks!
Shipping was super fast!
Everything worked out great with very quick shipping, and I'm ready for this weeks next RV ADVENTURE.
Hose said 12" but I wasn't sure if that was 12" total with connectors or just 12" hose , which would be 14" total w/ connectors .
Product works as it should and service with etrailer is exceptional. They are prompt and quick to rezone with solutions to questions and concerns. Delivery was very fast and Ashley E is delightfully helpful. I will continue to do business with etrailer and recommend them highly!
I bought it to upgrade the water port on my one year old Winnebago trailer. The old port was getting loose as the molded plastic was no longer retaining the fitting well. This new port is much better built and the water connection is less recessed so it is easier to access. The gripper makes connecting and disconnecting simpler as well.
The screw holes lined up well though not quite perfectly. It would probably have been fine to just driven the screws back in and been done with it, but I chose to rotate the unit about 30 degrees and created 3 new holes.
One minor gripe - The included screws are phillips only. Come on Valterra, this is for the RV industry where square drive is the standard. I solved it by just reusing my original screws.
This is my 3rd try and 3 different brand of these plastic check valves. The original on the travel trailer leaked a steady drip from day one from 2017. I figured it was time to stop the leak. I tried one brand same leak, tried another same leak. I used Teflon pipe tape and then a Kevlar pipe sealant still leaked. The tolerances on these plastic pipe fixtures are terrible. Looking at the threads you can tell they’re going to leak. So I’m back to square one with the constant fast drip. I also tried a brass check valve before I learned you can go brass female to plastic male but not plastic female to brass male. The treads won’t seal.
Unfortunately this turned out to be junk. It started rusting around the edges within six months of purchase.
the Valterra Water Inlet for RVs - Metal Recessed Flange - White -
was a replacement for my 98 5th wheel, it is made will, great fit,
comes with all you need but tools to install the new one.
Looks great and works like it should.
The white color - I would call Artic white.
The product fits perfectly and was exactly what I needed. Thanks, etrailer!
Arrived timely and was easy to install. The inlet is sturdy and well made. The supplied videos were helpful for making the proper selection
Had usual ugly white city water intake cover/flange. The worst color to stand up to UV and mold/mildew stains. All my exterior trailer accessories are being converted to black; door hatch to drain outlet. Not only does the rig look immediately sexier, it will withhold the elements better.
This part, A01-0169LFVP, is not available through most competitors, yet it is a standard replacement for my travel trailer and has a standard 1/2" faucet hose hook up for the interior, and the exterior is a standard 3/4" garden hose hook up.
It couldn't get simpler than this, and thank you for having it in black!
I had to replace this due to the sun ruining the plastic surrounding the connection. Trim on the new one is nice white metal instead of the stock plastic. Came with everything I needed for installation. Only thing is the male-to-male adapter you may need, (I did) is plastic. Had to be real careful tightening plastic fitting to brass. Would be better with a brass adapter, but works fine.
Very easy to install & tech support was awesome when I called to talk on the ph.
Nice, durable, and easy to install. I used larger screws than the supplied ones, so I could utilize the existing holes in the trailer exterior wall. Recently learned to leave an elbow or leader hose attached to reduce wear on this fitting. I believe the check valve seized on my old inlet, causing it to leak both inside and outside the trailer, but it was simpler to change the 15-year-old inlet than to troubleshoot the check valve.
Flimsy, spend more money and get a good one.
Very pleased with the product I ordered. Will certainly order again from you.
light was easy to install and quality of light was above what i expected
Fits perfectly. Bought this for my pop up camper. Will order from etrailer again in the future. Excellent customer service and speedy shipping.
Easy install and quality product. Came will all the installation parts needed.
Do you have a question about this RV Water Inlet?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rich
7/7/2021
Still holding up. Good product