Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.
Features:
Specs:
Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.
The MaxxAir II has a vent area that is twice the size of the vent area on standard covers. This provides more airflow in and out of your RV or trailer, and the side vents provide cross-ventilation for even more airflow. The angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out.
This MaxxAir II vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.
The MaxxAir II vent cover is specifically designed for installation on 2015 and newer-model MaxxFan and MaxxFan Plus roof vents - no drilling or tools are required. The integrated mounting brackets on the MaxxAir II perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.
If you're installing this cover over an older model MaxxFan or MaxxFan Plus roof vent without mounting tabs, no drilling is required, and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
If you're installing this MaxxAir II cover over any other roof vent, then drilling into the frame of the roof vent is required to mount the aluminum brackets. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
Average Customer Rating: 4.7 out of 5 stars (526 Customer Reviews)
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.The vent cover is a quality product and was very easy to install.
Just what I was looking for. Easy to in stall.
Not the greatest place to buy parts. After spending sometime on the phone trying to order the correct MaxxAir II fan cover I was still sent the wrong item. I returned the item and was charged over half the price of the vent fan price itself in coverage on shipping. I was never informed that if the part was incorrect it would be up to me to pay postage to return. Unacceptable in my book.
Product arrived as scheduled,easy to install, great price. Thanks etrailer!
Works as supposed to; Maxxair does not allow power vent/fan to open ALL the way but don't know if it really matters.
A bit more translucent than opaque. Will allow light in.
Michael
3/4/2024
Very happy with the vent covers. Allows me to have the vents open while in storage with no concern about rain intrusion. A real problem solver.
Nicely engineered with great finish AND made in the USA!
Fit perfectly over my rain sensing powered roof vents. Took longer to get up on the roof of my RV than it did to install the covers. All I had to do was slide supplied spring clips into the existing slots
Received products quick and had a great followup by etrailer crew.
Mike C.
9/8/2023
They held up very well and allowed us to leave vents open while traveling and in the rain. We traded the camper in on a new 5th wheel so we need to buy them again
Delivery was quicker than expected and at a great price. Thank you E-Trailer!
Craig
9/3/2023
Great, installation was simple.
Ready install, worked as advertised. I had to be careful that the cover did not interfere with the existing vent cover - the maxair had to be placed as far to the rear of the existing vent to allow the existing cover to clear the maxair - not much wiggle room.
As Described, Fast Shipping, Great Product & Service I will use Etrailer again, Thanks
Easy to install. Pull 4 pins and unit comes off. Have had no issues
Very easy to install when paired with MaxxAir's vent fans. 5 minute install!
Bought these for my 2022 alliance paradigm, our rv had the studs installed on the factory max fans. Because of this there was no deilling required, just place the covers and push the supplied pins through...couldnt have been easier!!
Holding up just fine still works good
Arrived quickly and is working great!
The vents were exactly what we needed, were fairly easy to install, and the price was reasonable. Order came quickly! We were very please with the order and have placed additional orders with etrailer!
Super easy to install 4 pins. Thats it.
Glen
8/12/2023
Still there and still works great.
Great price, fast shipping, what more could you ask for?
They came as ordered, and look great. Etrailer is a great company to purchase products from because of their good customer service. I’ve used the older models in the past and looking forward to seeing how these ones work.
E trailers price and service can't be beat. Ordered a Max AirII vent cover to replace the one I broke backing under a low object(The outside edge of my metal RV cover,keep it centered Brian, you know that.) E trailers price and shipping are great, on time no problem!
Product was as described. Shipping was fast and very good communication from seller. Took like 5 minutes to install our trailer already had the plastic tabs.
Great service and competitive prices, parts were in stock, packaging was done right too. Prevent damage, items arrived early. Highly recommend etrailer.
Looks to be a great product. etrailer’s service was superb.
California B.
12/14/2022
Absolutely super! Moves the air in or out as needed. Would highly recommend this product.
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John B.
4/26/2024
The MaxxAir vents have been working out no trouble with them at all, they hold up to wind and rain and keep things dry.