How to Install MaxxAir II RV Trailer Roof Vent # MA76JR

Question

Question:

How does this cover install

asked by: Paul

0

Expert Reply:

The MaxxAir II RV Roof Vent # MA76JR comes with all the needed hardware for installation. To install the cover you first need to position the cover in place and mark where the mounting brackets are located. Drill 3/16 inch holes in the marked positions and attach the brackets with the included screws. Close the cover, install the 4 snap lock pins, and push the snap lock pins down into the lock position and you're all set!

expert reply by: Chris R

0

Scott

8/8/2020

The cover does not allow the vent to open all the way. I have the max air fan. Is there an adjustment that has to be made for the cover to open completely with the max air II cover?

Reply

Chris R.

8/18/2020

That's not too uncommon - depending on the model vent the lid may not be able to open all the way beneath the cover. There aren't any adjustments you can make to change this. The good news though is that MaxxAir states that as long as the lid is opened at least 50 percent or more, the vent will still achieve max airflow.

Reply

Answer 1

Hello Larry; are you sure the brackets are 18" across as seen in the picture below? Looking at the parts listed from Grand Design the Reflection 362TBS has the MaxxFan 4951. This will have the mounting tabs that allow you to mount the MaxxAir…

view full answer...

Answer 2

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 3

We actually have a few different version of the white rain covers from MaxxAir. The MaxxAir II #MA76JR that you referenced comes with the pins. This is for applications where the roof vent has the mounting tabs on one side. Since you have the 4…

view full answer...

Answer 4

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 5

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hello Bernie, thanks for getting in touch. The 24x60 etrailer Cargo Carrier for RV Bumper #e99049 includes the carrier itself, the supports, bumper brackets and all necessary hardware. You can see all of the included parts in the pictures below.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Craig, yes the leg kit part #e89PR that you referenced will work to adapt the head of a Curt A20 hitch to fit the OEM pucks of your 2024 Chevy Silverado 3500. How'd you like your A20 hitch?

view full answer...

Answer 12

Hey Tom welcome! Both the Thule TracRac SR Sliding Truck Bed Ladder Rack item #TH94RE for a 6-3/4' bed or item #TH43002XT-780 for the 8' and the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever #item #TH44RE for 6-3/4' or item…

view full answer...

How to Install MaxxAir II RV Trailer Roof Vent # MA76JR

Product Page this Question was Asked From

Continue Researching