Can MORyde Refrigerator Tray For RV Cargo Compartment Be Used To Hold A Forge?  

The MORryde RV Generator Slide Out Tray #MR79RR has a 1.38" clearance from the ground to tray.

The inside tray of the MORryde Generator Tray - 25-3/4" x 26-1/4" Item #MR79RR is 24" wide x 24" deep x 2-3/4" tall. For overall dimensions the tray and glides will require a space that is at least 25-3/4" Long (depth)…

The largest MORryde RV Generator Slide Out Tray we offer is part #MR79RR which has inside dimensions of 24" long x 24" wide so it will be a good fit for a Predator Generator. Please note, it's not advised to run the generator whilst on…

The MORryde Generator Tray, #MR79RR is 25-3/4" x 26-1/4", has an approximate 24" extension. While the overall dimensions are 25-3/4" in length, the tray itself is 24" with a 24" extension. This is considered a 100%…

I have attached for you below the dimensions of the Kwikee Heavy Duty Tray Assembly Kit part #LC370793. The tray will slide out 11" while fully extended. Please note you will also need theTrim Kit for Kwikee Heavy Duty Tray Assembly Kit part…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Hey Mark, Nope, your long bed GMC Sierra 3500 won't require the use of an offset gooseneck hitch ball with the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box #GY58GR. With the gooseneck prep package you can use a standard hitch ball, the B&W Ball…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Richard, thanks for reaching out! The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500. The only way to remedy this is to use the…