Looking For A Cargo Slide For Mu Predator 5000 Generator

Updated 01/08/2026 | Published 12/28/2025

Question:

Hi, Can you help me to find your best option for my generator predator 5000 please? I want to install it in vertical position. Best. Oscar

asked by: Oscar A

Expert Reply:

Hey Oscar,

Based off of the general dimensions I can find online for that generator the closest slide out tray we have for that is going to be the MORryde # MR79RR. This has tray dimensions of 24" long x 24-1/4" wide. I am not familiar with that generator so I went with the general specs I could find online.

Let me know if yours is a different size and I can see if there is a better suited one for you.

expert reply by: Nick S

Don G.

1/2/2026

I used this sliding tray in my front cargo hold next to the nautilus. Had to put a double layer of plywood base to raise up the floor so the slide would clear the storage door opening. Was able to carriage bolt thru the metal base & 2 layers of plywood a secure with large washers on subfloor on 3 corners. For back right I Used 2' wide metal with 90 degree bend on each end. Secured the back right corner with lags to the base and attached the top metal support to the ceiling alum frame tube. [holding tank below this corner]. Had local machine shop make the brace. Drilled hold in side of slide mechanism at an opening for a "security bolt". Westinghouse I Gen 4500. Can send pics if needed.

Oscar A.

1/7/2026

Hi Nick, I measured the generator by myself and it has 18"Long X 22" wide, since I don't have much space I wondering if you have something more smaller to install it in vertical position?