Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Whether you're driving, off hiking, or relaxing at camp, you'll always know what's behind your RV. Rear camera helps you navigate blind spots while changing lanes on the highway or backing into a tight space - and records video at night.
Reversing into a tight campsite or navigating busy roads? No problem! The backup camera gives you a clear, top-down view while the built-in microphone lets you hear your spotter - no more yelling or frantic hand signals. It's also motion-activated, so it'll give you a clear view right from your monitor whether it's a late-night visitor, a curious critter, or an opportunistic thief. And you can record video with an SD card (not included) perfect for keeping an eye on things while out on a hike.
No more worrying about dropped signals, electrical interferences, or lagging video feeds! This wireless camera system delivers a stable, real-time view, even if you have a longer RV, motorhome, or box truck. It'll hold a steady connection for up to 100' as you're cruising down the highway and up to 492' once you've parked at the campsite.
Switch between camera views with a quick tap of a finger and get a clear, real-time look at what's around your RV. The anti-glare 7" screen supports up to 4 cameras and lets you watch 3 at a time to help you keep an eye on traffic merging onto the highway. Need help backing into your campsite? Rear park assist marker lines guide you right into place.
This setup comes with 2 monitor stands, a cigarette lighter charger, and a USB-C power cable. The backup camera mounts at the back of your RV, and the monitor sticks to your windshield or sits on a tabletop - wherever works best for you! And if your RV is already prepped for the Vision S+ system, you'll have an even easier time getting it all set up with little to no drilling.
California residents: click here
Installed and wired as directed. Originally plugged in the monitor to the USB/C cable and result was no power. Checked cord in plugging to my phone. Result said it was charging. Then checked the cig lighter pluggin. Result that the monitor works w/ lighter pluggin.
I'm not sure what the USB cord was sent along for. Now that I found a way to power it up. The camera and monitor works as I was hoping. I'm able to see my trailer clearly behind my pickup "slide in" camper.
Fifth wheel came prewired with the blank shark fin attached for a Furrion system so it was literally remove 4 screws, plug in the camera and reinstall using the same 4 screws. Plugged the monitor into the USB port on the truck, plugged the trailer lights into the truck and turned on the headlights to put power to the camera.
The install was so easy my brother in law could have been trusted to do it.
This is a great upgrade from the 2020 model that came with the 2021 CrossTrek. The install was a breeze.
Works great! I also have the side cameras installed. Must have for a 5th wheel or any RV really.
The camera system is great and was easy to use as an upgrade from an older model. The problem I encountered was that with many late model Chevrolet trucks, a Furrion power cord adapter is required for the system to work. This should be noted in bold print in order to keep us consumers from spending unnecessary time trouble shooting the problem. Even spoke with an etrailer representative on the phone and was told to call Lippert to solve the issue. Not good customer service when this issue, according to Lippert, has been known for several years. Luckily a local trailer/RV dealer has these in stock so it is clearly a known issue.
Installation was fairly straight forward. The 7" screen is plenty big enough and the resolution is crystal clear. I had to use the heat shrink wire connectors because the hole, to push all the wires back into, was not big enough for any type of wire nuts. I also used stainless steel self tapping screws to screw the camera to the camper, through the rubber base plate and went back and touched up the screw heads with black automotive paint - so the shiny screw heads wouldn't stand out. After the paint dried I siliconed all screw heads and all holes - previously there before install and any that I had to make - were siliconed prior to installing the rubber base plate.
Good camera, easy install & hookup for'25 forest river no-bo. Plug & play. Great info and help from e-trailer! Shipped fast too! Thanks e-trailer.
The product is good, but beware if you had a previous version (Vision S v/s Vision S+) that the new monitor can only be powered by 5V as opposed t the 12V earlier units!
Just received camera system, well packaged and received on time. Will continue with review after installed.
Awesome seller thank you
Easy to install.
Easy to install. Great picture quality.
Worked verry will. Will use all the tim e.
Quick delivery and damage free!
Love these guys! Ordered on Friday - in hand by Monday. Never disappoints.
Item arrived early and great service th anks
Great
Do you have a question about this RV Camera System?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
10/14/2025
Glad it's working well for you, Tom! That USB-C cord should have also supplied power, so it's a little weird that it didn't. Would you prefer to be using that cord? I can see what we can do to get that remedied if you like.