See what our Experts say about this Yakima Accessories and Parts

• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback Wagon
  I went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
  view full answer...
• Will The Yakima Landing Pad For 2018 Subaru Outback Work On A 2025 Outback?
  Hello Joe, thanks for reaching out. I am sorry to say that the Yakima landing pad for the 2018 Subaru Outback will not carry over to the 2025 model. The 2018 Outback uses the 8000241 Landing Pad 15. The 2025 model uses the 8000254 Yakima Landing Pad 27. Both pads work with the Timber Line towers, so as long as that is what you have, you can re-use them. You will need the new 8000254 landing pad part # Y46VR for the 2025 model. You should be able to re-use your crossbars too. We recommend...
  view full answer...
• Thule Hullavator Kayak Carrier Mounting Requirements
  To install Thule's load-assist Hullavator kayak carrier # TH898 on a vehicle's roof rack the ends of the bars must extend out past the roof rack feet by at least 4-inches. You can see this requirement illustrated in the linked diagram. The comparable Yakima ShowDown carrier # Y04081 also has a similar bar space requirement. If your roof rack is a Subaru factory type whose bars do not extend past the rack feet/rails then you can still use the Hullavator but you'll need to add a different...
  view full answer...
  
• Will Older Thule Hullavator Work With Yakima JetStream Roof Rack on 2019 Subaru Outback
  Your older Thule Hullavator 897XT will work with the Yakima JetStream crossbars for your 2019 Subaru Outback. The T-slot on the JetStream bars are 1" wide x 1/2" tall, which is actually slightly larger than the T-slot on the AeroBlade bars so you won't have any issues fitting the Hullavator into that T-slot. As for the length of the bars, I do recommend using the 60" Yakima JetStream Crossbars # Y00426 to ensure you have the needed space to use your Hullavator. The rest of the parts...
  view full answer...
• Yakima RoundBar Roof Rack to Fit 2017 Subaru Outback with Stowable Crossbars
  The parts you listed are correct to make up the Yakima RoundBar rack for the 2017 Subaru Outback models that use Subaru's stowable rack system like you have. Here's links to each part: 48 inch RoundBars # Y00408 SkyLine Towers # Y53TR RoundBar Adapter # Y03536 Landing Pad 15 # Y00241 Since it sounds like you may already have crossbars it's possible you don't need new ones. The 48 inch bars are the recommended length but if yours are longer you can use them on your new Outback. They'll...
  view full answer...
• Yakima Landing Pad For 2024 Subaru Outback Premium With Factory Roof Rails
  Hello Greg. Our records show the correct landing pad for the 2024 Subaru Outback Premium with factory roof rails to be the Landing Pad 27 part # Y46VR. This will work with either the Yakima SkyLine or Control towers.
  view full answer...
• How To Install the Landing Pad 15 On a 2015 Subaru Outback
  The Landing Pad 15 for Yakima Control Towers part # Y00241 which is used alongside the Yakima JetStream Crossbars part # Y00425 and the SkyLine Towers for Yakima Crossbars part # Y53TR on your 2015 Subaru Outback are very easy to install. This process is done entirely outside the vehicle so you don't have to remove the headliner or anything like that. There is actually only one bolt per pad once you remove the factory crossbars which you can see in the attached photo.
  view full answer...
  
• How To Mount The Yakima HD Cross Bars On A 2018 Subaru Outback Wagon
  To add the Yakima HD cross bars to the existing roof rails on your 2018 Subaru Outback wagon. I don't suggest making holes in the roof rails. We cannot provide the information to install them in that manner. I recommend using the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 Item # Y03541 the Landing Pad 15 for Yakima Control Towers - Qty 4 Item # Y00241 and the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track...
  view full answer...
• Can Yakima Round Crossbars Install on Roof of 2015 Subaru Outback Wagon with Factory Rack
  Yakima does have a way to install a set of their round crossbars like the part # Y00408 on the roof of your 2015 Subaru Outback Wagon with the parts # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Can I Use Crossbars That Are Wider Than My 2019 Subaru Outback?
  As long as your 2019 Subaru Outback Wagon has the factory side rails running front to back, then you can install longer Yakima crossbars. The 78" crossbars may be too wide since you do not want to exceed the total width of your vehicle (due to safety and state laws). It looks like your vehicle is about 73" wide so I recommend cutting the 78" bars down to fit your vehicle's width. The complete kit is as follows: Round 78" CrossBars # Y00411, RidgeLine Towers # Y00145, Adapter # Y03536,...
  view full answer...
• How To Carry Two Kayaks On a 2019 Subaru Outback
  In order to carry two kayaks on a 2019 Subaru Outback you are first going to need to start with a roof rack for which I recommend using the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00241. The Yakima JetStream Crossbar System has aero shaped crossbars for reduced wind noise, integrated channels for accessories, and a custom fit set of landing pads that install in fixed mounting points on the roof which makes for a really nice overall look. Then, in order...
  view full answer...
• Replacement Covers for Yakima Landing Pads
  Which Landing Pads do you have? I ask, because the replacement cover you need will depend on which Landing Pad you have. Here's a listing of which covers we currently offer with the Landing Pad they work with: • LandingPads 1 - 4, 8 - 10, LP11, and LP16 - LP22, and LP24, part # Y8890029 • LandingPads 5, 6 or 7, part # 8890030 • LandingPads 12, 13 and 15, part # 8880210
  view full answer...
• How Much Height Does Yakima Roof Rack Add to 2018 Subaru Outback with Stowable Rack System
  We can give you a really good approximation of how much height the Yakima roof rack system will add to your 2018 Subaru Outback with the stowable rack system. To add the Yakima rack to your '18 Outback you will need to first remove its stowable crossbars and install the Landing Pad 15 for Yakima Control Towers # Y00241; these 2 inch tall landing pads will be approximately 1 inch above the top of your Outback's side rails. After that you will add the SkyLine Towers for Yakima Crossbars...
  view full answer...
  
• Can Two Thule Hullavator Kayak Carriers Be Used On a 2019 Subaru Outback Wagon
  In order to use a Thule Hullavator Pro Kayak Carrier part # TH898 on a 2019 Subaru Outback Wagon you will need to install an aftermarket crossbar system as the factory crossbar system doesn't have the required overhang needed. That said, you'd only be able to install one Hullavator on the roof as two would require a very large crossbar and this is not recommended by Thule anyway. Therefore, you'd need a different carrier for the other kayak and for this I recommend the etrailer J-Style...
  view full answer...
• Recommended Roof Rack for 2015 Subaru Outback Compatible with Malone Kayak Carrier
  If you have the flush mounted rails that run front to back on your 2015 Subaru Outback, then I recommend the following roof rack: Yakima CoreBar Crossbars - 50" Long # Y00421 SkyLine Towers # Y53TR Landing Pad 15 # Y00241 Lock Cores # Y07204 If you have the raised side rails, then I recommend the Rhino-Rack Vortex StealthBar Roof Rack # JA7975. Both of these options are rated for up to 165 lbs and will work well with the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD. You...
  view full answer...
• Yakima Landing Pads for 2017 Subaru Outback Wagon
  The Yakima Landing Pad 15, part # Y00241 is a confirmed fit for the 2017 Subaru Outback. According to Yakima, these will work with SkyLine towers and Control Towers. If it turns out your current towers don't fit the new landing pads, you'll need the following parts to use your existing round bars: - SkyLine Towers for Yakima Crossbars, part # Y53TR - Round Bar SL Adapter, part # Y03536 This will allow you to keep your current bars and install them on the landing pads if needed.
  view full answer...
• Widest Crossbar Spread Roof Rack Solution for 2017 Subaru Outback
  I can understand wanting to have a larger spread between the crossbars, especially if you're carrying things like canoes and kayaks and don't want to have large amounts of the boats hanging off of either end of the bars. The issue isn't so much the roof rack kits like the # Y53TR with # Y00241 and # Y00421 , as it is the mounting points available on your 2017 Subaru Outback. The Yakima roof rack kit mentioned above has the largest recommended spread of any of the crossbars that we offer-...
  view full answer...
  
• Best Way to Carry a 13' Sailboat with a 2017 Subaru Outback Wagon
  I have a few different solutions for transporting your Laser sailboat with your 2017 Subaru Outback Wagon; the first is with the roof rack you mentioned, but in all honesty that makes me a bit nervous so I'm going to recommend a trailer option as well. Roof Rack Parts - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 15 # Y00241 - Lock Core Kit # Y07204 (optional) - BigCatch Kayak Roof Rack w/ Tie-Downs # Y04091 Trailer Parts - Draw-Tite Max-Frame Trailer...
  view full answer...
  
• Best Option To Upgrade Roof Rack On 2018 Subaru Outback
  The best upgraded roof rack we can offer for a 2018 Subaru Outback Wagon would be from Yakima, the JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00241 in particular is what I recommend. This system would provide you with a 165 lb weight capacity which would be the limit for this vehicle. It would also provide you with longer crossbars as well as those that have channels which will make the roof rack much more versatile.
  view full answer...
• Can Thule Hullavator Be Used on 2019 Subaru Outback Wagon with Factory Roof Rack
  I do have a way for you to be able to use the Thule Hullavator Kayak Carrier # TH898 on your 2019 Subaru Outback, however as you mentioned in your question you won't be able to attach the carrier using the factory roof rack on the vehicle. This is simply because The Hullavator requires that the roof rack crossbars extend past the feet at least 4 inches so that there is the necessary clearance between the carrier and the vehicle. Since the factory crossbars are flush with the feet/side rails,...
  view full answer...

Do you have a question about this Accessories and Part?