Video Transcript for In-Depth Review of the Replacement Mounting Bracket for Kodiak Disc Brake Caliper

Today, we're going to take a look at the replacement mounting bracket for Kodiak disc brake caliper, on an 8,000 pound Dexter axle, and this one is in a Dacromet finish. This is a nice, heavy-duty, ductile iron construction. This one has a nice Dacromet plating to provide superior corrosion resistance for freshwater or saltwater use. It meets a 300 to 400 hour salt-spray rating. It has the embossed bolt holes to provide extra thread contact for your caliper guide bolts, gives you a nice, tight, secure connection between the bracket and the caliper. The side support ensures that the load is carried by the bracket, not just the bolts. The stiffeners help reduce vibration when you brake.

This is a universal design, it'll work for either left-hand or right-hand assemblies. This part is made in the USA. Again, the specs on this is for calipers on disc brakes with one piece hub and rotor assembly, for an axle rated at 8,000 pounds, and the axle type would be a Dexter axle. The rotor diameter that works on this is 13 inches in diameter, and the brake flange configuration, you can see, is a four-bolt mounting brake flange. But that should do it for the review on the replacement mounting bracket for Kodiak disc brake caliper, on an 8,000 pound Dexter axle, and this is in a Dacromet finish..