Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Lift your 5th-wheel hitch from your truck bed with a hoist. Just install this lifting bracket into the jaws of your hitch and attach a cable to the eye.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we'll be having a look at the Demco 5th Wheel Lifting Bracket. Part Number DM6100. Many of our customers here at etrailer have come to us and have expressed that they've had experienced difficulty in the past when it comes time to remove the 5th wheel assembly from the bed of their truck when they want to have full access to it when they're not towing their trailer. Many have also said that it takes two to three people sometimes to remove a 5th wheel assembly, especially when they have a slider, such as this one, because the slider assembly adds a lot of weight. When you want to make it a one man operation, that's where this Demco Lifting Bracket comes into place.As you will notice it looks like a kingpin. That serves a purpose of sliding into the jaws of our 5th wheel giving us a solid attachment point.
To utilize it we'll simply open our jaws of our 5th wheel. With the jaws open we can insert our lifting device. Making sure we watch our fingers. Enclose the jaws around it. With our lifting adapter now in place we now have an eyelet here to attach a cable or chain to a engine hoist, a standard hoist on a ceiling, a crane, a wench, something of that nature.
Any lifting device that you have where you can attach a cable to properly. We can use that to lift this out of the bed of our truck.Now this lifting device is made of a sturdy steel construction and has a lifting capacity of 500 lbs., which is minimally sufficient to handle most every 5th wheel regardless if you had a slider or not. For a few dimensions for you, you're looking at 5-3/4" tall, from the very base of it to the very top of it. Diameter here is 2", just like your standard kingpin. The base is 3" wide.
The eyelet opening has a diameter of 1-1/8". That completes our look at the Demco 5th Wheel Lifting Bracket. Part Number DM6100.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Marvin G.
1/18/2021
Excellent tool for lifting the hitch.
Dennis
5/1/2023
Still working like it should.
Todd
8/4/2022
Still working great. Strong and sturdy hoist. Can always count on it.
Howard
12/20/2022
A year later and I cannot say enough positive things about this lifting bracket. Used frequently and no signs of wear. Still highly recommend this product.
Bob D.
10/14/2025
Would still recommend!
Marc M.
11/25/2021
Still going strong! Makes lifting the Pullrite in and out of my truckbed much easier! Have always had success using strainer and their products!
Reginald
2/12/2022
Great - still using it every time I take the ditch out of my truck.
Rick S.
1/19/2020
Works Great!!
Myron F.
10/23/2018
Ive used it 3 times and it works great. No need for chains, straps, or anything else. Put this where the kingpin goes and it keeps the hitch centered while lifting. Great product.
Carl K.
8/28/2020
Superb Component. I have gotten a great deal of use from the bracket. I have removed and installed the 5th wheel hitch many times and not needed to bull work the hitch at all. I use my engine lift, release the hitch from the flame, move the track, put on a heavy caster dolly and I am done. Sweet.
Bob J.
3/24/2019
Works perfectly! No more straps or chains.
Olemax
9/21/2019
This still works well for me. I would not change anything.
Ron K.
4/7/2024
Works great. I have a lift in my garage and I use the bracket when removing g and installing my 5th wheel hitch on my truck. I lower it on to a dolley and then roll it out of the way. So easy to use, I remove it after every camping trip.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kurt V.
5/24/2021
Follow up on demco 6100 lift bracket. Has been a little over a year and bracket working out great. 2017 ram 3500 truck,curt a16 fifth wheel hitch,pullrite bed adapter all inclusive abt 300lbs. I am 66 years old and cant lift what I used to be able to. Sure I can remove in pieces and do it without lift and bracket but is a lot of weight for me.Bracket and lift make it possible to remove in 1 piece with way less wear and tear on me.BIg plus is I can do it by myself.I lift to bed of truck on to 2x4s then remove bracket from hitch from there can push into position and in puck system.bracket works great.