Your low-pressure regulator and propane appliance need a hose between them. This 12" hose connects components with 3/8" male flare fittings when the regulator and appliance are mounted close together.
When your propane regulator and appliance sit close together, a er hose leaves extra line to manage. This 12" hose connects the two without unnecessary length. The 3/8" female flare swivels on both ends attach to compatible male flare fittings, providing a flexible connection for your low-pressure propane system.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steven here with etrailer. Today, we're taking a look together at our MEC 12 inch propane hose. So folks, if your propane regulator and appliance are mounted pretty close together, you don't necessarily want or need a long hose that you have to coil up or find somewhere to store, right So this will give you a short, but flexible connection for carrying propane between those two components. So with anything, on propane hoses, you always wanna make sure you check the fittings on both ends to be sure they match up with what you need. So in this case, they're actually the same. So you have a 3/8 inch female flare swivel on both ends.
So this hose is designed to connect two components that both have that compatible 3/8 inch male flare fitting. Now, what's nice about these swivel ends is that during installation, you tighten these connections without having to twist the entire hose with it. And because these are flare connections, the seal is actually created where the flare surfaces meet rather than the threads, so you don't have to apply any thread sealant to the flare fittings. Now, that being said, I highly recommend you always check every connection after you've made a new connection with leak detection, sold separately. We sell that here separately, item number MEC78TR, that's MEC78TR, sold separately.
It's a pink leak detection fluid. You'll wipe some on both sides once you got it connected, you'll re-pressurize your system, and as long as you don't have any bubbles or anything, you should be good to go. Now, the hose itself is a thermoplastic with fully crimped brass ferrules on both ends. It's UL and CGA approved for propane services. (ferrule clanking) Now, this 12 inch installation is compact, but it also does have some flexibility as far as movement, so that can accommodate the vibrations and movement while you're driving once your setup is, you know, set up and staying set up for years and years to come.
So a great option for you. We do carry these on multiple lengths, check them out if you need something longer. I'm Steven, thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.