Your low-pressure regulator and propane appliance need a hose between them. This 9' hose connects components with 3/8" male flare fittings and gives you room to position the appliance farther from the regulator.
When your propane appliance needs to sit farther from the regulator, a shorter hose can limit where you set up your equipment. This 9' hose gives you the reach to position your appliance where you need it. The 3/8" female flare swivels on both ends connect to compatible male flare fittings on your regulator and appliance.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Steven here with etrailer. Let's take a look at our MEC 108-inch Propane Hose. So folks, 108 inches or nine foot, this is going to be great for connecting your propane regulator maybe to an appliance where those components aren't really close to each other. So this will give you that nine feet of flexible hose needed to route the connection precisely where you need it. Now I left it kind of braided up just like it comes here with a couple of cable ties.
Obviously this stretches out to that full nine foot. Both ends feature a 3/8 inch female flare swivel connection. So that's the number one thing. You want to make sure you're matching up. And those match up with the 3/8 inch male flare fitting that would connect to there.
Now because they're swivel connectors, that just means you're twisting this with the wrench and not the hose itself. Now one last thing to remember is that with flared fittings, when you connect those, you don't have to put pipe dope or any kind of pipe tape on there. That flare fitting is what makes that connection. And I do recommend sold separately, you pick up some gas leak detection solvent, solution, sorry, rather, and basically it's pink in color, comes in a little 16 fluid ounce jar, and then when you twist the lid off, it has a brush applicator. You can brush all your connections, make sure you have no bubbles, make sure there's no harmful gas leaks.
The hose itself is a thermoplastic hose, so it's fully crimped on both ends with the brass ferrules. So it's super strong. It's rated for 350 PSI working pressure, and that thermoplastic design just makes it flexible but also means it can withstand a lot more of those UV rays and those times way outside the years and years down the road and stuff. So that's a great option for you. This is the 108 inch or nine-foot-long MEC Propane Hose.
I'm Steve with etrailer. Thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.