Dimensions of the Frame Clamps for the Erickson Truck Bed Ladder Rack

Question

Question:

Thanks Conner! I’m interested in the distance from the top of the cross tube to the top of the upright. Also, what is the total weight of the rack and is the cross bar hollow? I am thinking of adapting for use on an M416 trailer

asked by: Eamac

0

Expert Reply:

The manufacturer does not provide the dimensions you are inquiring about so I went out to our warehouse and measured the Erickson Truck Bed Ladder Rack w/ Load Stops part # EM07706 for you. The upright from tip to tip is 29-1/4" tall. The clamps are 14-3/4" long x 3-1/4" wide at the top x 1-1/2" wide on the side.

I have attached a photo with these dimensions for you as well.

expert reply by: Conner L

0

click to enlarge

Eamac

1/30/2019

Thanks Conner! I’m interested in the distance from the top of the cross tube to the top of the upright. Also, what is the total weight of the rack and is the cross bar hollow? I am thinking of adapting for use on an M416 trailer

Reply

Conner L.

1/30/2019

Sorry for the confusion, the distance from the top of the crossbar to the top of the upright is 3/4". The entire rack weighs around 80 lbs and the crossbars are indeed hollow.

Reply

Answer 1

According to Yakima the Trail Rail system will need to be removed in order to use the Yakima Outdoorsman 300 #Y01136-Y00410 on your 2020 Jeep Gladiator. This is the case for all of the Yakima ladder rack systems. Currently (August 2019) there are no…

view full answer...

Answer 2

The Optronics LED Trailer Tail Light #STL9RB can be mounted however you would like. So there's nothing that will prevent the light from working. However, I would suggest checking with the DOT in your area to make sure that there aren't any…

view full answer...

Answer 3

While I appreciate your ingenuity, you cannot install the light brackets in reverse so the license plate is on the right-hand (passenger's side) when installing the tail light assemblies of the Detail K2 Mighty Multi A-Frame Utility Trailer…

view full answer...

Answer 4

The crossbars on the Erickson Truck Bed Ladder Rack - 500 lbs #EM07706 measure 1.8" in diameter. We have reached out and confirmed this with Erickson in the past. Attached is a review video for you to check out.

view full answer...

Answer 5

I recommend using something like and L-bracket, such as #CE26098G, that you can attach to the top rail near the end of the trailer. Then you can attach a bracket such as #LPL55CB (may have to do some drilling/modify the L-bracket). Then you can…

view full answer...

Answer 6

I do have a headache rack option for your 2004 Ford F-150 that will work with your UWS Crossover Toolbox but the MaxxTow MaxxHaul Heavy Duty Headache Rack MT70234 has not been confirmed to fit. I have a customer that was able to make this work but it…

view full answer...

Answer 7

I would recommend to use the treated torx screws for ACQ (Alkaline Copper Quaternary) treated wood for better corrosion and rust resistance. The treated torx screws like the Redline 2-1/2 Inch Long Torx Trailer Screw for ACQ Treated Wood, part…

view full answer...

Answer 8

A 14 inch trailer tire is going to be about 6 inches taller than what you have now so you'd lose about 3 inches of fender clearance. A 205/75-14 like the wheel and tire #AM32156 would have the same width so it would fit in that regard. We…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Dimensions of the Frame Clamps for the Erickson Truck Bed Ladder Rack

Product Page this Question was Asked From

Continue Researching