Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks

Part Number: JET-01

49 Reviews | 10 Questions

In Stock

$16.20

Retail:$27.67

You Save: 41%

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

stromberg carlson accessories and parts camper jacks trailer jack vinyl cover with drawstrings for electric

stromberg carlson accessories and parts covers

stromberg carlson accessories and parts jet-01

stromberg carlson accessories and parts camper jacks trailer jack covers vinyl cover with drawstrings for electric

stromberg carlson accessories and parts camper jacks trailer jack

stromberg carlson accessories and parts camper jacks trailer jack covers

stromberg carlson accessories and parts covers jet-01

Show All (10) Product Images

Show Fewer Product Images

Customer Photos

Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks customer photo

Show All (1) Customer Images

Show Fewer Customer Images

Videos

The Low-Down on the Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

1-800-940-8924 to order Stromberg Carlson accessories and parts part number JET-01 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks. Accessories and Parts reviews from real customers.

Stromberg Carlson Accessories and Parts - JET-01

Features:

Fits Stromberg Carlson Electric Jacks (JET-2500, JET-3500 and JET-3700)
Quantity: 1 vinyl cover with drawstrings

JET-01 Stromberg Carlson Vinyl Jack Cover with Drawstrings

Video of Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Demo Stromberg Carlson Vinyl Cover with Drawstrings JET 01

The Low-Down on the Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks

Video Transcript for The Low-Down on the Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks

Hello, neighbors. Steven here with etrailer.com. Folks, today we're looking at a Vinyl Cover with Drawstring for your Stromberg Carlson Electric Jacks. So, folks, this would look something like the image here on the screen before you. Whenever it's over the jack, it's just gonna basically protect it from the weather, the elements, that kind of stuff, and just keep your jack, number one, looking good, but also keep bugs and debris and stuff out of it whenever it's not in use for long periods of time. Now it does fit the Stromberg Carlson Electric Jacks JET-2500, JET-3500, and JET-3700.

And, again, it's just a nice vinyl cover, again with the drawstring. Simply pull it, cinch it down however tight or loose you need it. The inside's got a nice soft fabric on the inside. Let's find some dimensions. It's about 11 1/2 inch tall by 11 1/2 inch wide.

And then on the thin side wall, it's about 4 3/4 inches. Well, folks, that's gonna wrap it up for our quick look at this Vinyl Cover with Drawstrings for your Stromberg Carlson Electric Jacks. I'm Steven. Thanks for watching.

4.7

49 reviews

5 Stars		(37)
4 Stars		(10)
3 Stars		(2)
2 Stars		(0)
1 Star		(0)

by: MPC 08/28/2026 One Year Later

This cover works great! I saved the bubble wrap from my trailer jack replacement, so I put the bubble wrap on first, then this cover and cinch it tight. After a year of use in windy Rocky Mountain weather, I’ve had zero issues on the highways or byways or in the campgrounds. Highly recommend this cover!

by: Rick L 09/15/2017

This cover is nice, but is a little large at the top for my Husky Brute power Jack. Other than that it seems to be made of a decent quality material. The one I ordered originally for the Brute is no longer carried by etrailer, and I asked them to substitute one for me. Like many times before they do a fine job on my orders.

Click to Enlarge

by: Gail 04/28/2020 One Year Later

This item covers the top of my electric jack. After a year, it is starting to show wear because the plasticized material is starting to crack in a few places. We live on a hill farm in Vermont, so the weather can be challenging - cold and windy in the winter, and sunny and, sometimes , quite hot in the summer. We store the trailer outside year round, and the cover provides needed protection. I expect the cover to be useable for the next few years, even with the wear.

by: Richard M 05/27/2014

Electric jack sure makes life easier with a 30 foot fifth wheel!!

Richard M. One Year Later

5/27/2015

This cover protects the jack motor from the elements. Well worth the money

by: Susan 11/29/2017

This jack leg extension is just what we expected. It appears to be well built and sturdy. It was needed for some extra height on the LCI electric jack we'd purchased for our travel trailer. etrailer sent it in a timely manner and provided plenty of tracking info on the order.

We also received a vinyl jack motor cover with drawstring, which looks well made. It's way bigger than expected...we don't think the drawstring can be pulled in tightly enough to snug it down underneath the jack motor. However, it's specified for a different type of jack! It just looked smaller in the ad's picture.

by: Justin N. 12/18/2015

Quick shipping and the product is exactly what I needed. Thanks

Justin N. One Year Later

12/17/2016

The cover is still holding up great

by: Glen 02/19/2023 One Year Later

The jack has performed great over the past year. The only minor comment would be that the integrated light hasn't been bright enough to use for other tasks other than seeing the switches. As that is as designed feature, it's only a minor inconvenience if you want more light at the trailer hitch.

by: Richard 11/02/2018

Ordered the cover to protect the electric tongue jack that I just installed. I don't know if it's necessary but at least it will protect the jack from the sun, since my camper is in a shed facing west. The western sun gets pretty intense in the summer in Western Colorado. It fit the jack perfectly and the material seems to be tough enough to last several years. And the price was very reasonable too.

by: Walt 12/24/2018

Works just as it should. Seems well made; should last for a long time. My jack is not a Stromberg Carlson, yet it works for me too. Best is the price.

Walt One Year Later

12/24/2019

Still going strong-I put a bucket on it to protect it from the sun.

by: MIKE C 02/22/2017

THIS IS A GREAT JACK FOR THE PRICE HAVE IT ON OTHER TRAILERS FIND IT TO BE A QUALITY PRODUCT I RECOMEND THE JACK COVER IT KEEPS IT DRY AND CLEAN

by: Hugh 09/28/2018

I am writing this review because it is easy. There were no problems and everything went smoothly and etrailer.com met my expectations. I personally would have designed this cover with a larger draw string. The one that it has now is so small that it slips in my hand when trying to tighten it. Not a problem but just a recommendation.

by: Gary L 08/23/2017

Excellent cover to protect my investment of an Stromberg Carlson electric jack.

by: Jack D. 11/10/2014

Great quality product. Works like it's supposed to do. We have a lot of overnight dew, fog, and sometimes drizzle. This item protects my electric hitch from the elements much better than the plastic garbage sack I was using (and it looks much better also).

by: Eric S. 08/28/2016 One Year Later

Works great. Will save your tongue jack from the elements.

by: Jim S 08/11/2014

Installed in under 5 minutes, great price, american made, lifting speed was faster than anticipated, would buy again. The optional cover doesn't fit the best but well worth the extra couple bucks if you keep the unit outdoors in storage.

by: John 12/30/2017

the cover is too big and doesn't fit the jack motor very well, even though it's by the same company.

by: joe 07/24/2015

fits great just put it on couple of days ago time will tell if it holds up to the weather camper is stored outside i live in Virginia not bad winters bu get the heat

Joseph C. One Year Later

7/25/2016

good product would buy again

by: chris moon 06/22/2015

great product, fast shipping thanks

by: Tyler 12/31/2017

Good product. Reasonable Price. Does the job. Use it when parked. Not sure I trust it going down the road.

Tyler R. One Year Later

1/1/2019

Been about a year since purchased. Works well for protecting electric Jack from sun and rain while camping

by: Phil 06/11/2019

Quick delivery. Simple installation, (10 to 20 minutes max,). Works great. Very satisfied.

by: Mike J. 08/21/2017

Nice finishing touch for my new electric jack.

by: Chuck 06/16/2016 One Year Later

So far holding up great keeping things dry

Chuck One Year Later

6/16/2017

still whole taking the heat of so cal

by: Adam 09/27/2017

We just got it but it fits well and easy to use.

Adam One Year Later

9/27/2018

It works but all the out side vinyl is starting to peel off.

by: Excellent 05/19/2020 One Year Later

Excellent fit and quality

Stephen One Year Later

5/20/2021

Excellent works and seals like it came from the factory

by: saege 08/26/2016

works great

Sarge One Year Later

8/26/2017

still working like new... happy camper...

true

Show More Reviews

See what our Experts say about this Stromberg Carlson Accessories and Parts

Do you have a question about this Accessories and Part?

Replacement Option for Lippert Smart Jack Electric Trailer Jack
There was indeed a recall on the Lippert Smart Jack Electric Trailer Jack part # LC643589. It sounds like you have a pre-recall version but in order to confirm you can look on the back of the jack for a sticker on the stem with a serial number. If there is no serial number present or if it is lower than SJWP2017-07-0001, then the jack was made prior to the recall and it will need to be replaced. In regard to who is responsible, that is not really my place to say but most people will go...
view full answer...
Recommended Electric Tongue Jack for a 6,000 Lb Travel Trailer
A trailer jack only needs to be rated for the tongue weight of the trailer when used in this location (on the tongue). However, it is always a good idea to choose a jack that is overrated for your needs as this will create less stress on the jack which will in turn improve it's life. For your trailer with a hitch weight of 620 lbs, I recommend the Stromberg Carlson Electric A-Frame Tongue Jack part # JET-2500 which is rated for use on trailers with a tongue weight up to 2,500 lbs and will...
view full answer...
Looking for a Cover for the Lippert Components Power Tongue Jack # LC285318
When it comes to a cover for your Lippert Components Power Tongue Jack, # LC285318, you can use Vinyl Cover with Drawstrings, # JET-01. This cover was designed for use with the Stromberg Carlson Electric Jacks, which were manufactured by Lippert Components. Being manufactured by the same company, the design of part # LC285318 is nearly identical so the cover will fit the Lippert jack as well.
view full answer...
Lippert Smart Jack Extends On Its Own
It sounds like water has got into the circuit board on your Lippert Smart Jack Electric Trailer Jack part # LC643589 as this is a common issue that causes the jack to raise and lower on its own. There was a recall for this and it sounds like you have a pre-recall version but in order to confirm you can look on the back of the jack for a sticker on the stem with a serial number. If there is no serial number present or if it is lower than SJWP2017-07-0001, then the jack was made prior to...
view full answer...
Tongue Jack Cover for Stromberg Carlson Electric Tongue Jack JET-5000
Yes, the Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks # JET-01 will also fit the Stromberg Carlson Electric Trailer Jack # JET-5000.
view full answer...
Jack Head Cover Options for a Lippert Electric A-Frame Trailer Jack
We have many jack covers that you could use but none specifically for your Lippert jack. Ultra-Fab cover # UF38-944020 is 12" x 14-1/2". Ultra-Fab also has # UF38-944026 which is 14-1/2" x 15-1/2". Cover # JET-01 is designed for Stromberg-Carlson jacks that are essentially identical in dimensions as Lippert jacks.
view full answer...
Dimensions of Stromberg Carlson Electric Jack Cover # JET-01
The # JET-01 electric jack cover measures approximately 11-1/2 by 11-1/2 inches square for the height and width and it's about 4-3/4 inches wide. I've attached a diagram for you. It's designed specifically for the # JET-2500, JET-3500 and JET-3700 Stromberg Carlson jacks.
view full answer...
Will # JET-01 Cover Fit etrailer Electric Jack 3500 lb Capacity?
The Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks # JET-01 will fit the Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black # EJ-3520-BBX or White # EJ-3520-WBX but it will be a little big. I recommend the Ultra-Fab Protective Cover for Electric A-Frame Jacks # UF38-944020 instead as it will be a better fit.
view full answer...
Is There a Universal Plug for the Manual Override on an Electric Trailer Jack
I do have some options for you but there is no guarantee that they will work unless you have the exact jack they are designed to fit. If you can provide me with the exact jack you have then I may have a better option for you but otherwise; part # UF38-751114 fits around a 1" opening so this may work. We also have covers for the entire head, part # UF38-944020 and part # JET-01 which have a more universal fit but are again designed to fit specific jacks.
view full answer...
Tailgate on 2013 Ford F-150 Makes Contact with A-Frame Electric Trailer Jack
Stromberg Carlson has vinyl cover # JET-01 you could use for trailer jack # LC285318. But You might be better off using a longer ball mount so that the trailer is a little further away from the truck. This would eliminate contact between the tailgate that the jack. The longest ball mount we have, # EA40 measures 14-5/8 inches from the center of the hitch pin hole to the center of the ball hole. But it is only rated for 8,000 pounds. Ball mount # BM20 measures 13-1/4 inches and is rated...
view full answer...

Do you have a question about this Accessories and Part?

Info for this part was:

Expert Research:

Michael H

Installed by:

Steven C

Updated by:

Mike S

Updated by:

Michael B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.