bing tracking image
  1. Accessories and Parts
  2. RackEm
  3. Grass Catcher
  4. Extensions
Extension for Rack'Em Multi-Mount Grass Catcher - Aluminum and Stainless Steel

Extension for Rack'Em Multi-Mount Grass Catcher - Aluminum and Stainless Steel

Item # RLES25
lowest price pledge
Our Price: $239.78
You Save: $10.17
Accessories and Parts
This item qualifies for Free Shipping
Shipping Weight: 15 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Add this extension to your Rack'Em grass catcher for 4.4 cu ft of increased capacity. Perfect for collecting leaves and grass. 1-636-306-4830 to order RackEm accessories and parts part number RLES25 or order online at Free expert support on all RackEm products. Guaranteed Lowest Price and Fastest Shipping for Extension for Rack'Em Multi-Mount Grass Catcher - Aluminum and Stainless Steel. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (4)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

RackEm Accessories and Parts - RLES25

  • Grass Catcher
  • Extensions
  • RackEm

Add this extension to your Rack'Em grass catcher for 4.4 cu ft of increased capacity. Perfect for collecting leaves and grass.


  • Extension increases the capacity of your grass catcher
    • Designed for use with Rack'Em 4.4 cu ft grass catcher (sold separately)
    • Fits catcher door opening that measures 18 3/4" (top) x 21" (left side) x 18-1/4" (bottom) x 19" (right side)
  • Fold down handle makes on/off and emptying easier
  • Accurate mounting angle for a more level profile
  • Fully welded frame for improved fit
  • Riveted aluminum skin panels provide a cleaner look


  • Capacity: 4.4 cu ft
  • Weight: 11 lbs

RLES-2.5 Extension for Rack'Em Multi-Mount Bagger - Aluminum and Stainless Steel

Video of Extension for Rack'Em Multi-Mount Grass Catcher - Aluminum and Stainless Steel

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Rackem Lawn Mower Grass Catcher Review and Installation

Adam: Hi everyone, Adam with Today, we're going to be taking a look at the Rack'em Grass Catcher. Today we have the normal grass catcher and our extension here. So we're going to go ahead and mow some grass and catch some grass.So I just went ahead and trimmed the outside of this little field here, and I noticed a little bit of grass flying up, look down, and we do have a full carrier. So I'm going to go ahead and remove this, dump it and get back to work. I'm just going to grab my handle here, rotate it up and then pull it out.All right, so I just got done mowing this backfield and to be honest, I had to unload this a lot more often than I thought.

This is going to be the fifth dump. One thing I did notice is whenever it starts spewing out some of that grass, that's usually when it's full. As you can see here, I do have a lot of grass piled up. But just to show you guys, it's really easy to dump it, tilt it like this. And I have found it easier to actually take this door off.

So when our catcher has room to put all this dead grass, this is going to be our desired result. As you can tell, it's very clean looking and you're not going to spend a lot of time raking up all that dead grass, which is going to give you more time to enjoy your yard with friends and family.So with this attachment, obviously we are going to add a little bit of width to our mower. And at this widest part here, it is going to be about 20 and a half inches. We aren't going to really take away any of our ground clearance because the bottom of this will be even with the bottom of our deck. One thing to note, if you are on an incline and tilted right, we might have a little bit of contact with the ground here.

So just be mindful of that. And these measurements are going to be the same with all the types of grass catchers. The only thing different is we are going to have a different face plate, which is going to mount to your specific mower.So as you can see here, the face plate that we picked out for our Exmark, it definitely has a wide enough opening to where all that grass can flow in to this carrier. So our empty grass carrier here is going to be about 23 pounds. But when you buy the extension, this is going to be about 11 pounds.

Or if you buy the leaf catcher, this is going to be about nine pounds. So these accessories are going to come with all the bracketry needed. This one in particular did come with this clamp here to get that fastened down and it will utilize the original door. So you don't have to worry about finding a place to store your door, it will use the same exact hardware.And the leaf catcher is going to install the same way and will come with another bracket. But I am just going to use the one on our metal extension. So this grass catcher is going to allow you to gather all that grass clipping while you're mowing. So you're not going to be spending a lot of time picking up all that dead grass. So you have a lot more time to do other things around the house. Custom face plate will be able to fit any type of mower that you do have. In this case, I have an Exmark and we picked the right face plate and it bolts it up pretty easily. It is relatively lightweight, which makes it easy to unload it when it's full of that moist grass. It is made of stainless steel and aluminum, so it's going to last you a very long time.And to be honest, I really didn't see a difference in how this mower reacted when I'm driving it. I didn't really tell that I have more weight on the one side and it wasn't rattling around. All in all, I was actually pretty impressed on how it worked and how it allowed my mower to handle just as if I didn't have it installed. So whether you are mowing a back pasture, whether you're mowing the backyard or even a baseball field, this is definitely going to get the job done and give you a very clean look.So I just wanted to let you guys know that the trailer that I usually use to haul my mower around, I'm not going to be able to load it with my grass catcher installed. So just be sure that you have at least 20 and a half inches of extra space on one side on your trailer. And if you do, you should be good.So we pull our grass catcher out of the box, it's going to come as you see it here. We are going to have a little bar on the inside that we're going to get undone. This is going to come out like so, and we're going to end up mounting this to the top here. It does come with all the hardware. As you can notice, we do have our four holes here, which in the right orientation, this bar will line up very nicely. So we're going to use our included tool to fit in there. I am going to use a three eighth wrench up top for that lock nut. So once we get everything nice and tight, make sure everything is faceted down correctly.And then we can go ahead and install our face plate. To mount our face plate to our catcher here, we are going to have to go through the inside. And one thing I do suggest is just opening up this door and you can actually just remove it just so it doesn't slam down on your hands when you're in there. But once we do it, going to get that in there.So we're going to take our included hardware here and go through the four designated holes. And it's just going to be a bolt and a lock nut. So we we're having a little bit of issues getting this hardware through the holes, but I did solve it with a pair of vice grips. I just grabbed it like so, squeezed it together and then I was able to get that bolt through there. So another quick tip, we are going to get four bolts to fasten this faceplate to the catcher, but one is going to be shorter. One thing I did notice the hole down here is bigger than all the other ones and his head will be able to fit through that. So the shorter bolt will go on this hole here, just need to push this in a little bit and that should fall into place. And as you can see underneath, we've got plenty of room to put our nut on. So we are going to be using the same tools as before. So just go ahead and tighten those four down.So now we're going to go ahead and install this bracket and we're going to install it on one of these middle holes here. And what it's going to do is basically just slide over your deck like so, just so it's going to hang there. But we do want to make sure that we're not going to mount it to where it's going to cover this hole because we will be using that later. So I am going to use my half an inch wrench here for the inside lock nut, and I'm going to use a 14 millimeter socket for the outside.So as you can see, our bracket here is in between these two metal posts here, and we do have our other bracket going through our deck here and it's all lining up nice. We do have the hardware included. So I'm going to come down here and fish this through the top hole and we will have a nylon lock nut and it's going to be the same as these two over here. So once you get your grass catcher all hooked up properly, all we really need to do is put this door on and then we're ready to mow.Well, all in all, I would definitely recommend this to anybody doing even the smallest of mowing jobs. It keeps everything very clean and you get a better result with little, if not, no more effort whatsoever. Again, this was the Rack'em Grass Catcher and I'm Adam for

Customer Reviews

Extension for Rack'Em Multi-Mount Grass Catcher - Aluminum and Stainless Steel - RLES25

Average Customer Rating:  5.0 out of 5 stars   (4 Customer Reviews)

Add this extension to your Rack'Em grass catcher for 4.4 cu ft of increased capacity. Perfect for collecting leaves and grass.


Excellent product use it everyday!


product is high quality,put together easily,received it very quickly.




See what our Experts say about this RackEm Accessories and Parts

  • Rack Em Grass Catcher and Extension for Scag Tiger Cat II With 61" Velocity Deck
    The Rack'em Grass Catcher for Scag Lawn Mower with Velocity Deck # RCMMS4-OVBS1 comes with the faceplate you need along with all hardware needed for installation. The extension you are seeking is the Extension for Rack'em Multi-Mount Grass Catcher - Aluminum and Stainless Steel # RLES25 which will give you and additional 4.4 cubic feet of room for clippings before emptying.
    view full answer...
  • Rack'em Grass Catcher for Exmark Mower with 5 inch Discharge Opening
    The # RCMMS4-EXS15 Rack'em Grass Catcher is compatible with your Exmark mower with a 5 inch tall discharge opening. This catch will only fit if the discharge opening extends out even with or past the face of the rear wheel. The extension is part # RLES25. You won't need any other adapters as the # RCMMS4-EXS15 is specifically designed for your mower. I've linked to some product videos that you might find helpful.
    view full answer...
  • Rack'em Grass Catcher for Exmark Lawn Mower with 5" Discharge Opening
    For your Exmark lawn mower with the 5" opening you actually just need the Rack'em Grass Catcher # RCMMS4-EXS15. This comes with the carrying handle as well as a face plate for a 5" discharge opening so neither of those would be extra. If you'd like to add an extension we also carry that as part # RLES25.
    view full answer...
  • Grass Catcher Compatibility with Toro Mx4260 Zero Turn Mower
    The Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower # RCMMS4-EXS1 is the part you are seeking. Since you have a fabricated deck, you will also want the bracket kit # RBTORO. It will come with the instructions and hardware you need and I've attached some videos to assist. You also may want the Extension for Rack'em Multi-Mount Grass Catcher - Aluminum and Stainless Steel # RLES25.
    view full answer...
  • Grass Catcher For Toro Zero Turn Without The Z Deck
    For your Toro Zero turn mower you need the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower Item # RCMMS4-EXS1. If you would like to add a dust cover or extend your basket I recommend the Dust Cover Kit for Rack'em Grass Catchers Item # RA94FR and/or the Extension for Rack'em Multi-Mount Grass Catcher - Aluminum and Stainless Steel Item # RLES25.
    view full answer...
  • Exmark Lawn Mower Compatibility with Rack'em Grass Catcher
    Your Exmark lawnmower will not fit the Rack'em Grass Catcher for Exmark Lawn Mower # RCMMS4-EXS15 because the design is for a 5 inch discharge opening. The # RCMMS4-EXS1 for Exmark is a fit for 4 inch discharge opening. I don't know if there is an adapter for your deck but if you can get one of these two discharge openings then you would choose the correct option and the Extension for Rack'em Multi-Mount Grass Catcher - Aluminum and Stainless Steel # RLES25 will work with either of those...
    view full answer...
  • Which Rackem Grass Catcher will Work on my 42" Toro Z Turn Lawn Mower
    We have a couple of options depending on your deck. While the Rack'em Multi-Mount Grass Catcher part # RCMMS4 is part of it you need the face plate to match. If your Toro uses the Z-Cut deck use the Rack'em Grass Catcher for Toro Lawn Mower with Z-Cut Deck part # RCMMS4-EXS1-TORO if it uses the standard deck use the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower part # RCMMS4-EXS1. There is an extension available for it as well to reduce the dump frequency with the Extension...
    view full answer...

Do you have a question about this Accessories and Part?

  • Why

    At we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jeff D
Installed by:
Jeff D
Employee Adam E
Installed by:
Adam E
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video by:
Chris R
Employee Erin H
Written by:
Erin H
Employee Manda E
Updated by:
Manda E

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.