Recommended Hitch and Wiring Harness for a 2023 Infiniti QX60
Updated 05/23/2026 | Published 05/19/2026
Products Featured in This Question
Question:
hi there I just bought a 2023 infiniti QX60. i need pull a trailer can you help setting up a towing kit with wire harnes
asked by: Robert M
Expert Reply:
Hey Robert, congrats on the new SUV. To install a hitch and a wiring harness on your 2023 Infiniti QX60, I recommend the following parts:
Trailer Hitch - Curt Hitch item # C46DR. This is a custom fit class III hitch with a 2" receiver. It has a 6,000 lbs towing capacity and a 900 lbs maximum tongue weight. It includes all necessary installation hardware and will look great when installed. The 2" receiver and safety chains are all you'll be able to see.
4-Way Connector -Curt T-Connector Vehicle Wiring Harness item # C95ZV. This harness includes a custom fit connector that is going to plug directly into a factory port located in your Infiniti's rear cargo area.
What kind of trailer are you pulling?
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Stealth Hitch that Fits 2024 Ford Mustang Mach-E
- Q&A: Why Does the etrailer Trailer Hitch part # e72AR Have a Higher Towing Capacity than the Vehicle?
- Q&A: Best Replacement For Older Dometic Duo Therm 57915.531 Ducted Single Zone AC System With Furnace
- Q&A: Does Roadmaster Invisibrake System Require Installing Diodes too
- Q&A: Replacement Air Conditioner for a Dometic Duo Therm 600315.331
- Q&A: Recommended Replacement AC for a Dometic 57915541
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Air Conditioner 13,500 BTU Will Replace My Current Dometic Air Conditioner?
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
Pete
5/22/2026
I installed this combo on a 2024 QX60 , which should be identical to yours. The installation was straightforward - a bit tedious at times but certainly doable. if you have a helper that will be handy when you're dealing with the weight of the hitch and pushing it up into the chassis to start threading the bolts. The only thing I wasn't thrilled about was having to put the bracket for the wiring harness onto the plastic underside of the rear trim. It certainly works , it's just not very rigid. But I towed a twin axle , flatbed utility trailer cross country with that rig , and it was perfectly fine. Even though it under two thousand pounds total , I installed a curtis brake controller which offered peace of mind , especially in three mountains.