bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class IV
  5. 10000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2016 Ram 1500
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Part Number: 14090
In Stock
$270.72
Retail:$448.95
You Save: $178.23
Trailer Hitch
Not Confirmed to Fit

2016 Ram 1500

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

CURT For Towing - 14090
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" part number 14090 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (258)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - 14090

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 10,000 lbs (GTW): Handles trailers, campers, and boats with Class IV strength
  • Holds up to 1,000 lbs (TW): Supports heavy cargo carriers and towing accessories safely
  • Bolt-On Installation: Mounts directly to frame with included hardware—no welding needed
  • 2" Receiver Opening: Works with standard towing and hitch-mounted accessories
  • Powder-Coated Steel: Gloss black finish over protective base resists rust and corrosion
Made in USA

Features to know about

Handle Heavy Loads with Confidence: Class IV Strength and 2" Receiver

This hitch is built for serious towing with a 10,000 lbs maximum gross trailer weight and 1,000 lbs maximum tongue weight. When used with weight distribution, those numbers jump to 12,000 lbs GTW and 1,200 lbs TW. The 2" x 2" receiver gives you the strength and versatility to tow campers, boats, or utility trailers and still handle bike racks or cargo carriers when you’re not towing.

Built to Last in Tough Conditions: Powder Coated, Fully Welded Steel

The square-tube design is fully welded for strength and stability. Curt’s gloss black powder coat finish is layered over a protective base coat for superior rust resistance. It stands up to road salt, grime, and impact from gravel or debris so your hitch stays looking good and performs reliably over time.

Simple Bolt-On Install: No Welding or Drilling Needed

This hitch bolts directly to the frame using included hardware, so there’s no need for welding or special tools. It’s designed as a custom fit for clean alignment with factory holes, giving you a solid mount without having to modify your vehicle. The complete hardware kit and step-by-step instructions make it a practical DIY project whether you’re setting it up for towing or adding accessory support.

Specs

Dimensions

  • Receiver opening: 2" x 2"

Weight and Capacity

  • Rating: Class IV
  • Maximum gross trailer weight: 10,000 lbs
  • Maximum GTW when used with weight distribution: 12,000 lbs
  • Maximum tongue weight: 1,000 lbs
  • Maximum TW when used with weight distribution: 1,200 lbs

Warranty

  • Limited lifetime warranty

14090 Curt Class 4 Trailer Hitch Receiver

Installation Details 14090 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.8

258 reviews
Review sort icon
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Easy installation



by:

Arrived as ordered. Very quick shippin g.



by:

Very easy to install, only took me about 15 minutes. I have never installed a hitch before and almost paid [retailer] $290 for one. After watching some videos on the install, I am glad I decided to do it myself.



by:

Fits like a glove



by:

Hitch was really easy to install; no drilling required.

You will need an impact wrench because the rectangular washers will spin.



by:

I intentionally purchased the Curt hitch because although other hitches match its weight ratings, Curt always has a fantastic finish. The black is super shiny and durable. The fit was spot on too.



by:

Our church van needed a receiver hitch so we could use a cargo rack or pull a small trailer. This one was a perfect fit and quick to install.



by:

Mounted up with no issues whatsoever and the etrailer.com installation videos helped tremendously. Very clean install.



by:

I have purchased other Curt products before and all have fit exactly as described. Construction is high quality and accuracy/fitment is great. This hitch is downright simple to install using 6 bolts and no drilling. If you have any experience at all I expect you could install this alone in 30 minutes with not much more than a 3/4" wrench. I find it a great value, price being so economical that I canot even justify building one myself, being a full time fabricator, I could easily have done so.



by:

Your website said it would fit my van it did not. There was a random number on the page that the product was on and I was suppose to know that ment it would not work on my van.

Mike L. profile picture
Etrailer Expert

Mike L.

2/24/2026

The hitch fits 3/4 and 1 ton models of the 2025 Chevy Express/GMC Savana. Do you have a 1500?



by:

Nice looking heavy duty hitch, rated better than the van is rated for. My only real issue was, like others have said, the plates that go in the frame are too small to prevent the bolts from turning while tightening. I had 1 or 2 that torqued all the way, the others I had to hit with with an impact. Oh, just realized my pic shows a plastic plug in the hitch, that's not included, just one that I had laying around so I popped it in.



by:

This hitch installation was very simple and it fit the existing holes perfectly. Actually took us longer to set up, find the right size socket and clean up than the actual setting the 6 bolts and tightening. I have added a before and after of our new hitch. Thanks for making it so easy. Now we are ready to tow stuff.



by:

The hitch arrived promptly, in good condition and was easy to install! We also got the wiring harness which was also so easy to install and get our storage rack lights up and running. Thanks!



by:

Excellent! Installed perfectly as described, and has been in use ever since, with opened carhaul+ 19'enclosed. Heavy duty with hardware. Also bought the harness adapter. Everything shipped with lightning speed for very reasonable price. Recommended to all.5 stars.



by:

Correct item



by:

My wife and I pull trailers on a regular basis. We put a lot of miles on this hitch on all types of weather. It’s held up well under harsh conditions.
I would definitely buy another one, in fact, I did.



by:

Fast shipping, good price and the hitch was super easy to install.



by:

So the hitch went up super easy. It could be easier with say, two people but I was pigheaded. Just me...and a dozen super sized zip ties. All went well to final tightening. 4 camping weekends later each bolt took minor crank down. 6 mos later bolt still tight. This Fall I may take down and repaint to protect from rust. Michigan.



by:

Hitch arrived promptly and it is of high quality. Installation was really easy, pre-drilled holes fit with the frame of my 2020 Chevy Express 3500 passenger van.
I didn't lift the van in order to attach it, and since I did the installation by myself, I found a creative way to lift the hitch to the van. See attached pictures :)



by:

Arrived super fast.
Very well-made.
Looks
great. Shiny black.
All 6 bolt holes lined up with the predrilled holes in the van.
I used blue thread locker on the bolts, for extra security.
Installed on my 2009 Chevrolet Express 1500G full size cargo van, repurposed as our travel van. 30k miles in 2 years.
It was time to add towing capability. Bought the class 4 10,000 lb. model

Charles M. profile picture

Charles M.

11/23/2020

I bought a 2 frame trailer hitch a year ago. I installed it using blue, medium thread locker on the bolts. We just recently took a road trip and attached a rear platform carrier on the hitch for the trip. The hitch performed perfectly, is strong as heck and the finish has remained perfect with no rusting.



by:

Quality build, fast service with a great price, very pleased with purchase. Would recommend, and thank you for the excellent customer service.



by:

Less expensive than other sellers and pretty easy install even for a 70 yo one person install and actually removal of old receiver. Only had to drill one hole for perfect fit on Express 1500 customized van.



by:

Nice hitch. Easy ordering and easy inst allation.



by:

The hitch went on as easy as promised and fit perfectly! Even doing by myself didn't take too long.

James D. profile picture
Etrailer Expert

James D.

5/27/2026

Bryan I agree, pretty straight forward install. Glad everything went well and thanks for your feedback!



by:

Product was excellent as I bought two before. Customer service was not the best. I placed an order on Tuesday and before it was shipped on a Wednesday the price dropped 21 dollars. Asked for a price match less than 24 hrs after purchase and was told that is policy sorry and cannot adjust price.


25
25

See what our Experts say about this CURT Trailer Hitch

  • Trailer Hitch And 7-Way Wiring Harness For 2010 GMC Savana 2500 Passenger Van
    Hey John, I can definitely help with this. For the trailer hitch for your 2010 GMC Savana Passenger Van I recommend the Curt Class 4 Hitch 14090. It has a 10,000 lb towing capacity and 1,000 lb tongue weight capacity. It is also a simple bolt-on installation. For the wiring, there is a plug-in option for the 4-way, but if you want a 7-way, there will be additional wiring involved. What you can do is use the Curt T-Connector # 55540 along with the Universal Installation Kit # ETBC7....
    view full answer...
  • Recommended Trailer Hitch Receiver for 2005 Chevy Express 2500 3/4 Ton Van
    The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" # 41946 is a confirmed fit for your 2005 Chevy Express van but the measurements are correct. This hitch does require drilling to install rounding out the holes, so that may account for the difference. My recommendation for you is to use the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14090 which measures 40 inches wide on center. This hitch requires no drilling for installation....
    view full answer...
    Image 1 for
  • Trailer Hitch for a 2003 Chevy Express Cutaway Van with School Bus Body
    To use a hitch to tow with your 2003 Chevy Express van, it needs to mount to the frame at the rear underside of the vehicle to provide the necessary stability. If holes are not already there to install the hitch to you can look at a custom option drilling holes. The hitch manufacturer will likely not honor a warranty with such an install. I measured the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14090 hitch that is the same dimensions as # C15320 measuring the width...
    view full answer...
  • Dimensions of Trailer Hitch for 1997 GMC Savana Van
    The etrailer.com Trailer Hitch # E98861 will fit your 1997 GMC Savana so long as it is a cargo or passenger van model; if you take a look at the photo of the dimensions of this hitch you can see that the bolt holes are also 40" apart like you said yours were. I have added a link to a video of a similar hitch, the Curt # 14090, being installed on a '97 GMC Savana which you can use as a guide for your installation. For wiring which will give you a 4-way connector and allow you to power...
    view full answer...
    Image 1 for
  • Will Draw-Tite 2 Inch Ball Mount Rattle Around in Hitch Receiver Opening
    Every hitch and drawbar will have some movement between them, it's unavoidable. Any manufactured product like a receiver hitch will have variances in its size. For instance, the Curt # 14090 Class IV hitch has a 2 inch receiver. The actual measurement of the inside of the receiver tube is usually a little larger than 2 inches. The outside dimension of the shank of a ball mount like the # DT49MR you'd looked like is typically a tiny bit smaller than 2 inches. If the inside dimension of...
    view full answer...
  • Class IV Hitch that Fits 2006 Ford E-450 Cab and Chassis
    We have a Class IV hitch that fits your 2006 Ford E-450 with the Draw Tite part # 41947 but the # 14090 would not fit.
    view full answer...
  • What are the Hole Spacing Measurements on the Curt Trailer Hitch # 14090
    I spoke with my contact at Curt and I got the measurements between the bolt holes for you. I made a picture that shows the following dimensions: Side to side on center the holes are 40 inches apart. From the hole closes to the receiver to the next hole it is 3-3/4 inches. From the second hole to the first rear most hole it is 11-1/4 inches. And the two rear most holes are 1 inch apart. This hitch is designed to fit Chevy and GMC full size vans. I have included a link to the installation...
    view full answer...
    Image 1 for
  • Which Trailer Hitch for 2021 Chevy Express Cargo Van
    What kind of capacity were you needing? Depending on how its equipped, it looks like the 2021 Chevy Express has a pretty generous towing capacity of up to 10000 lbs. Your owner's manual will have more specific information. I really like the US made Curt receiver hitches which offer high quality construction at a reasonable price. For a 6K capacity, or 10K if used with weight distribution, I'd go with the Curt # 13040. For a higher capacity, go with the Curt # 14090 which is good up to...
    view full answer...
  • Distance from Frame to Cross Tube and Dimensions of Cross Tube for Curt Trailer Hitch 14090
    I measured Curt trailer hitch # 14090 for you. From the top of the mounting flanges to the top of the cross tube is 2-1/16 inches. The cross tube itself is 2-1/2 inches square. This hitch was designed for 1996 to 2018 Chevy Express and GMC Savana cargo and passenger vans.
    view full answer...
    Image 1 for
  • Recommended 7-Way Connector and Brake Controller for 2007 Chevy Express 2500 for Trailer with Brakes
    It doesn't sound like you have the factory tow package on your 2007 Chevy Express 2500, so you will want to start with a 4-way wiring harness like # 118392 if you don't already have it and then you will use the # ETBC7 wiring kit to upgrade to the 7-way connector for your trailer with electric brakes. Then you can install whatever brake controller you desire. I've attached a video to assist that shows the connection to the Tekonsha Primus IQ Trailer Brake Controller # TK90160 but the...
    view full answer...
  • Will This Work For My 2005 Jayco Greyhawk?
    Yes, certainly we can and will make the requested measurements but first let me be certain I am understanding correctly what you need. What I think you are wanting is a hitch for your 2005 Jayco Greyhawk that is built on the Ford E-450 Chassis. The Curt Trailer Hitch Receivers, # 13040 and # 14090 are designed to fit the Chevrolet Express Van. The bolt pattern and dimensions are not going to match the E-450 frame. There is not a bolt on hitch option for your 2005 E450 Chassis, the...
    view full answer...
  • Heavy-Duty Tow Package for a 2009 Chevrolet Express 1500
    There will be no wiring differences between the 2WD and AWD models of the 2009 Chevrolet Express 1500 in regards to trailer or brake control wiring. The Curt Class IV Trailer Hitch, # 14090, is an excellent choice for your van. We have an installation video of this hitch on a 2008 model that I attached for you if you plan to complete the installation yourself. The installation will be the same on your Express. For trailer wiring, you will need the following kits: Tow Ready T-One Wiring...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2016 GMC Savanna 3500
    For your 2016 GMC Savanna 3500 15 passenger van, I recommend the Curt Trailer Hitch Receiver # 14090. This is a very strong hitch with a towing capacity of 10,000 lbs or up to 12,000 lbs when using a weight distribution system. This is an easy installation with no drilling required. For your trailer wiring harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118392 which will install to the factory plugs found behind the trim panels on each side...
    view full answer...
  • Receiver Hitch for 1989 Lazy Daze RV hitch Built on Ford Van Cutaway Chassis
    We have a few bolt-on hitches that could work with your 1989 Ford Cutaway Van Chassis, if the outside to outside frame width is around 42 inches. You'll also want to measure for the drop you need. The drop if the vertical distance from the underside of the frame members where the hitch would attach to the lowest portion of the back bumper. You'll want to choose a hitch with the proper amount of drop, so the receiver tube will clear the rear bumper. If the drop is 1-1/2 inches or less,...
    view full answer...
  • Can 2007 Chevrolet Express Van 2500 Tow a 35 FT Yukon Trailer
    From the information that I was able to obtain for a 35 ft Fleetwood Wilderness Yukon Travel Trailer, this trailer should weigh right around 6,000 lbs. A 2007 Chevrolet Express Van 2500 will have a capacity between 6,100 lbs and 10,000 lbs, depending on model and options, so you'll want to check your owner's manual for your specific van's towing capacity. As long as the trailer's weight does not exceed the capacity of your van you should have no problems towing the trailer. If the trailer's...
    view full answer...
  • Trailer Hitch Fit for 2014 Ford E-350 Dually RV
    I have a couple of trailer hitch options for your 2014 Ford E-350 Dually RV. However there is not a custom fit trailer hitch designed for your E-350 Dually. I recommend using the Draw-Tite Class IV Weld-on Ultra Frame Trailer Hitch Receiver # 41990. This hitch uses weld-on brackets, like the 7 Inch Weld-On Bracket Kit # 4907, to attach to the frame of your vehicle. The weight capacity of the hitch exceeds the 10,000 pound capacity you are looking for, and the receiver measures 2 inches...
    view full answer...
  • Class 4 Trailer Hitch, Trailer Wiring, & Brake Controller For 2021 Chevy Express Van
    We can get your customer's 2021 Chevy Express set up with a Class 4 hitch, as well as the needed trailer wiring and brake controller. I'm going to assume they do not have any OEM wiring since they do not have the factory 7-way. What you will need are the following: - Curt Trailer Hitch Receiver # 14090 - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118392 - Universal Installation Kit for Trailer Brake Controller # ETBC7 - Redarc Tow-Pro Liberty Brake Controller...
    view full answer...
  • Recommended Trailer Hitch for 2015 Chevrolet Express Van
    We have just what you need! I recommend using the Curt Class IV # 14090 which installs without drilling and will provide you with a 2" receiver on the back of your 2015 Chevy Express. The Curt hitches have a bit more durable powder coating on them, so it will withstand the nicks and dings that happen when towing a trailer, and this will help reduce the chances that corrosion sets in on it. If you'll be towing a trailer you'll also need a wiring harness, ball mount and hitch ball to give...
    view full answer...
  • Recommended Hitch for a 2024 GMC Savana Work Van
    Congrats on the new vehicle! To add a hitch to your 2024 GMC Savana Van, I recommend the etrailer item # e98861. This hitch is custom fit and bolts to your work van with included hardware. I really like this hitch because it tucks in nicely below your rear bumper and does not affect your ground clearance. The etrailer item # e98861 is a class IV hitch with a 2" receiver It has a 10,000 lbs towing capacity and a 1,000 lbs maximum tongue weight which can be increased to 12,000 lbs and 1,200...
    view full answer...
  • Trailer Hitch Recommendation for a 15 Passenger 2010 Chevy Express Van
    The Curt trailer hitch # 14090 fits all full size versions of the 2010 Chevy Express Van. I have included a link to a video showing a typical installation for you and a link to the installation instructions. If you plan on doing some towing I recommend the etrailer ball mount kit # EBMK2216. It comes with 2 balls, a ball mount, hitch pin with clip, and a carrying bag. For trailer wiring use # 118392. I have included links to the installation instructions and a video for the wiring as well. You...
    view full answer...
  • Hitch Recommendation for a 2015 Chevy Express Van and GMC Savana Van
    Yes, the Curt Hitch part # 14090 that you referenced is confirmed to fit your 2015 Express Van by Chevy as well as a 2015 GMC Savana. This is a great hitch with a large capacity that should work well for you. Check out the install video I attached to see how it installs. For trailer wiring you will want the part # 118392. Install video attached for this product as well. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin...
    view full answer...
  • Will Curt Trailer Hitch 14090 Fit a 2006 GMC Savana High-Top Explorer Conversion Van
    Curt shows that trailer hitch # 14090 will fit all models of the 2006 GMC Savana 1500 and 2500. For the 3500 they only show it as a fit for the standard cargo van. Assuming that you have either a 1500 or 2500 and the conversion was a factory option then the hitch will fit. Curt lists hitch # C15320 as a fit for all models of the 2006 GMC Savana 1500, 2500, and 3500.
    view full answer...
  • Trailer Hitch and Wiring for a 2010 Chevy Express 2500 Van
    Since the cost of the Curt Class IV trailer hitch # 14090 is comparable to some of the other Class III hitches that are available for your 2010 Chevy Express 2500 I would go with it. Basically, you never know what you might need to tow so it is better to have the capacity and not need it than to need it and not have it! Since you plan on doing some towing I also recommend etrailer ball mount kit # EBMK2216. It comes with a ball mount with a 1 inch rise or 2 inch drop, a 2 inch ball and...
    view full answer...
  • Availability of Trailer Hitch Receiver for 2000 Ford E-450 Chassis With Bluebird Body
    We do have some options available for your 2000 Ford E-450 Chassis but unfortunately a custom-fit hitch is not available. What you need is the Draw-Tite Ultra Frame Service Body Trailer Hitch. This hitch fits vehicles with frames up to 44" so you will be able to use it without a problem. For a 7" drop you can use the # 41990-07 and for a 16" drop the # 41990-16. This is a weld-on application so you will need to take it to a certified welder for installation.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Patrick B
Test Fit:
Patrick B
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Bradley B
Test Fit:
Bradley B
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee John S
Video by:
John S
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.