Trailer Hitch And 7-Way Wiring Harness For 2010 GMC Savana 2500 Passenger Van

Updated 08/27/2024 | Published 08/21/2024

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(242)

$242.82

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(282)

$34.94

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

(6643)

$155.79

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3397)

$121.25

Question:

I have a 2010 GMC Savana 2500 passenger van and Id like to add a trailer hitch and a 7 way tow wiring harness. The van does not have factory wiring for any tow connector 4 or 7 way. I was wondering if there is a product that would I could plug into the existing wiring? I only saw one for a 4-way wiring harness

asked by: Jon A

Expert Reply:

Hey John, I can definitely help with this.

For the trailer hitch for your 2010 GMC Savana Passenger Van I recommend the Curt Class 4 Hitch 14090. It has a 10,000 lb towing capacity and 1,000 lb tongue weight capacity. It is also a simple bolt-on installation.

For the wiring, there is a plug-in option for the 4-way, but if you want a 7-way, there will be additional wiring involved. What you can do is use the Curt T-Connector # 55540 along with the Universal Installation Kit # ETBC7. These two kits combined will contain everything you need to wire your van with a 4-way and a 7-way. This includes all of the necessary wires for a brake controller, like the Tekonsha P3 # 90195 which is what I recommend.

You will find install videos for each part I mentioned linked below. Feel free to reach out if you have any other questions.

expert reply by: Jesse M