Dimensions of Trailer Hitch for 1997 GMC Savana Van

Updated 05/13/2019 | Published 05/10/2019

Products Featured in This Question

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class IV - 2"

(422)

$228.22

Dielectric Grease for Electrical Connectors, 2 oz.

(1503)

$11.91

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(257)

$256.24

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(11)

$49.82

Question:

1997 GMC Savana Van. My van is a heavy duty 2500 savana , the holes are 40 inches center to center and 4 inches apart , what are the dimensions for this hitch ?

asked by: Tim

Expert Reply:

The etrailer.com Trailer Hitch # E98861 will fit your 1997 GMC Savana so long as it is a cargo or passenger van model; if you take a look at the photo of the dimensions of this hitch you can see that the bolt holes are also 40" apart like you said yours were.

I have added a link to a video of a similar hitch, the Curt # 14090, being installed on a '97 GMC Savana which you can use as a guide for your installation.

For wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # C55335. It is also strongly recommended you use Dielectric Grease for Electrical Connectors # 11755 to help prevent any type of corrosion in your connector, which will increase its durability and extend its lifespan. I have added a link to a video of this harness being installed on a '97 Savana for you.
.
I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop – along with a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip.

You can use the link to the help article on ball mounts I've added to determine if this kit will give you the correct amount of drop or rise.